1,408 research outputs found
Characterization study of GaN-based epitaxial layer and light-emitting diode on nature-patterned sapphire substrate
[[abstract]]Chemical wet etching on c-plane sapphire wafers by three etching solutions (H3PO4, H2SO4, and H3PO4/H2SO4 mixing solution) was studied. Among these etching agents, the mixing H3PO4/H2SO4 solution has the fastest etching rate (1.5 μm/min). Interestingly, we found that H2SO4 does not etch the c-plane sapphire wafer in thickness; instead, a facet pyramidal pattern is formed on the c-plane sapphire wafer. GaN light-emitting diode (LED) epitaxial structure was grown on the sapphire wafer with the pyramidal pattern and the standard flat sapphire wafer. X-ray diffraction and photoluminescence measurement show that the pyramidal pattern on the sapphire wafer improved crystalline quality but augmented the compressive stress level in the GaN LED epilayer. The horizontal LED chips fabricated on the pyramidal-patterned sapphire wafer have a larger light output than the horizontal LED chips fabricated on the standard flat sapphire wafer by 20%.[[notice]]補正完畢[[incitationindex]]SCI[[booktype]]紙本[[booktype]]電子
Understorey plant community and light availability in conifer plantations and natural hardwood forests in Taiwan
Questions: What are the effects of replacing mixed species natural forests with Cryptomeria japonica plantations on understorey plant functional and species diversity? What is the role of the understorey light environment in determining understorey diversity and community in the two types of forest?
Location: Subtropical northeast Taiwan.
Methods: We examined light environments using hemispherical photography, and diversity and composition of understorey plants of a 35‐yr C. japonica plantation and an adjacent natural hardwood forest.
Results: Understorey plant species richness was similar in the two forests, but the communities were different; only 18 of the 91 recorded understorey plant species occurred in both forests. Relative abundance of plants among different functional groups differed between the two forests. Relative numbers of shade‐tolerant and shade‐intolerant seedling individuals were also different between the two forest types with only one shade‐intolerant seedling in the plantation compared to 23 seedlings belonging to two species in the natural forest. In the natural forest 11 species of tree seedling were found, while in the plantation only five were found, and the seedling density was only one third of that in the natural forest. Across plots in both forests, understorey plant richness and diversity were negatively correlated with direct sunlight but not indirect sunlight, possibly because direct light plays a more important role in understorey plant growth.
Conclusions: We report lower species and functional diversity and higher light availability in a natural hardwood forest than an adjacent 30‐yr C. japonica plantation, possibly due to the increased dominance of shade‐intolerant species associated with higher light availability. To maintain plant diversity, management efforts must be made to prevent localized losses of shade‐adapted understorey plants
New rosette tools for developing rotational vibration-assisted incremental sheet forming
A major limitation of the incremental sheet forming (ISF) is its difficulties to manufacture hard-to-form materials. The existing ISF process variants require additional systems or devices, which compromises the process flexibility and simplicity, the unique advantages of the ISF. In this study, a novel type of rosette tools is proposed for developing a new ISF process to improve material formability, named as Rotational Vibration-assisted ISF (RV-ISF). A hard-to-form material, magnesium alloy AZ31B, has been successfully formed in the RV-ISF experiment by creating low-frequency and low-amplitude vibrations, and elevated temperatures at the local forming zone in the range of 250–450 °C. By developing the new RV-ISF, it has achieved a 60% increase in fracture depth than that by friction-stir ISF and more than 46% reduction in forming force than that by the conventional ISF. Experimental evaluation and analytical prediction of temperature increase, forming force and flow-stress reduction have concluded that the combined thermal effect and vibration softening is the key mechanism leading to the significant formability enhancement. The results show that both the rosette tool design and tool rotational speed are critical factors determining heat generation and transfer as well as vibration frequency and amplitude. Investigation on microstructural evolution has revealed that the low-frequency and low-amplitude vibrations created by the rosette tool have activated dislocations and dynamic recrystallization, and produced refined grains and increased micro hardness. The new RV-ISF developed has potentials to manufacture other hard-to-form materials and complex geometries of sheet products, overcoming the formability limitation of the current ISF technology
Doping dependence of the resonance peak and incommensuration in high- superconductors
The doping and frequency evolutions of the incommensurate spin response and
the resonance mode are studied based on the scenario of the Fermi surface
topology. We use the slave-boson mean-field approach to the
model and including the antiferromagnetic fluctuation correction in the
random-phase approximation. We find that the equality between the
incommensurability and the hole concentration is reproduced at low frequencies
in the underdoped regime. This equality observed in experiments was explained
{\it only} based on the stripe model before. We also obtain the downward
dispersion for the spin response and predict its doping dependence for further
experimental testing, as well as a proportionality between the low-energy
incommensurability and the resonance energy. Our results suggest a common
origin for the incommensuration and the resonance peak based on the Fermi
surface topology and the d-wave symmetry.Comment: 5 pages, 4 PS figure
Patients with refractory cytomegalovirus (CMV) infection following allogeneic haematopoietic stem cell transplantation are at high risk for CMV disease and non-relapse mortality
AbstractPre-emptive therapy is an effective approach for cytomegalovirus (CMV) control; however, refractory CMV still occurs in a considerable group of recipients after allogeneic haematopoietic stem cell transplantation (allo-HSCT). Until now, hardly any data have been available about the clinical characteristics and risk factors of refractory CMV, or its potential harmful impact on the clinical outcome following allo-HSCT. We studied transplant factors affecting refractory CMV in the 100 days after allo-HSCT, and the impact of refractory CMV on the risk of CMV disease and non-relapse mortality (NRM). We retrospectively studied 488 consecutive patients with CMV infection after allo-HSCT. Patients with refractory CMV in the 100 days after allo-HSCT had a higher incidence of CMV disease and NRM than those without refractory CMV (11.9% vs. 0.8% and 17.1% vs. 8.3%, respectively). Multivariate analysis showed that refractory CMV infection in the 100 days after allo-HSCT was an independent risk factor for CMV disease (hazard ratio (HR) 10.539, 95% CI 2.467–45.015, p 0.001), and that refractory CMV infection within 60–100 days after allo-HSCT was an independent risk factor for NRM (HR 8.435, 95% CI 1.511–47.099, p 0.015). Clinical factors impacting on the risk of refractory CMV infection included receiving transplants from human leukocyte antigen-mismatched family donors (HR 2.012, 95% CI 1.603–2.546, p <0.001) and acute graft-versus-host disease (HR 1.905, 95% CI 1.352–2.686, p <0.001). We conclude that patients with refractory CMV infection during the early stage after allo-HSCT are at high risk for both CMV disease and NRM
On the mechanisms of heavy-quarkonium hadroproduction
We discuss the various mechanisms potentially at work in hadroproduction of
heavy quarkonia in the light of computations of higher-order QCD corrections
both in the Colour-Singlet (CS) and Colour-Octet (CO) channels and the
inclusion of the contribution arising from the s-channel cut in the CS channel.
We also discuss new observables meant to better discriminate between these
different mechanisms.Comment: Invited review talk at 3rd International Conference On Hard And
Electromagnetic Probes Of High-Energy Nuclear Collisions (HP2008), 8-14 June
2008, Illa da Toxa, Galicia, Spain. 11 pages, 21 figures, LaTeX, uses
svjour.cls and svepj.clo (included
Hawking Temperature in Taub-NUT (A)dS spaces via the Generalized Uncertainty Principle
Using the extended forms of the Heisenberg uncertainty principle from string
theory and the quantum gravity theory, we drived Hawking temperature of a
Taub-Nut-(A)dS black hole. In spite of their distinctive natures such as
asymptotically locally flat and breakdown of the area theorem of the horizon
for the black holes, we show that the corrections to Hawking temperature by the
generalized versions of the the Heisenberg uncertainty principle increases like
the Schwarzschild-(A)dS black hole and give the reason why the Taub-Nut-(A)dS
metric may have AdS/CFT dual picture.Comment: version published in General Relativity and Gravitatio
Semileptonic decays and Charmonium distribution amplitude
In this paper we study the semileptonic decays of the meson in the
Light-Cone Sum Rule (LCSR) approach. The result for each channel depends on the
corresponding distribution amplitude of the final meson. For the case of
decaying into a pseudoscalar meson, to twist-3 accuracy only the leading twist
distribution amplitude (DA) is involved if we start from a chiral current. If
we choose a suitable chiral current in the vector meson case, the main twist-3
contributions are also eliminated and we can consider the leading twist
contribution only. The leading twist distribution amplitudes of the charmonium
and other heavy mesons are given by a model approach in the reasonable way.
Employing this charmonium distribution amplitude we find the cross section
which is consistent with Belle
and BaBar's data. Based on this model, we calculate the form factors for
various decay modes in the corresponding regions. Extrapolating the form
factors to the whole kinetic regions, we get the decay widths and branching
ratios for various decay modes including their modes when they are
kinematically accessible.Comment: Changed content partially, Added references, 16 pages,2 figure
A New Approach for Model-Based Adaptive Region Growing in Medical Image Analysis
Interaction increases flexibility of segmentation but it leads to undesirable behaviour of an algorithm if knowledge being requested is inappropriate
- …