Fractal Array Antennas and Applications

Modern celestial and other advanced wireless communication systems require feasible array antennas with reconfigurable multibeams, broadband, high end of coverage, high gain, less side-lobe level with wider side-lobe level angles, better signal-to-noise ratio and small in size than conventionally achievable. This has initiated array antenna research in different tracks, one of which is by using fractal array antennas. The investigation on fractal-shaped antennas is basically focused on two fundamental areas such as the analysis and design of fractal antenna elements and the application of fractal geometric technology to the design of array antennas. These recursively generated antennas provide new insights into the antenna properties due to their self-similar behaviour. Owing to the feasible geometric construction and advanced properties, fractal antennas find applications in advanced wireless communications, MIMO radars, satellite communications and space observations. This work concentrated here is primarily aimed on the design of fractal array antennas using concentric elliptical ring sub-array fractal geometric design methodology and the reduction of total number of antenna elements at higher expansion factors of both conventional and proposed fractal array antennas

Ezetimibe in combination with a statin does not reduce all-cause mortality

BACKGROUND: Although the ezetimibe-statin combination has been shown to reduce LDL cholesterol by 12% compared to a statin alone, its effect on hard clinical endpoints such as mortality is less certain. Prior trials evaluated this combination in highly select population groups, but impact on all- cause mortality in the general population has not been reported. METHODS: A total of 3,827 subjects who were prescribed either a statin (group 1) or the combination of statin with ezetimibe (group 2) between January 1st, 2005 and January 1st, 2008 were studied. Socio-demographic and clinical variables and mortality records were analyzed. Univariate and stepwise multivariate logistic regression analysis was performed to identify the impact of ezetimibe on all-cause mortality, controlling for patient characteristics, selected cardiovascular diseases and risk factors, and medications. RESULTS: Group 1 (n = 2,909), and group 2 (n = 918) were similar in regards to most demographic variables, 152 patients died from any cause during the study period. There was no difference in all cause mortality between the groups. Hypertension, higher HDL-C and omega-3 fatty acid use were associated with ezetimibe use in this cohort of patients and were considered as covariates in the analysis. Patients on the drug combination did not experience lower mortality after controlling for covariates and other significant risk factors. CONCLUSIONS: No significant mortality benefit was found with the use of ezetimibe in combination with a statin over use of a statin alone. Omega-3 fatty acid use and higher HDL-C demonstrated a substantial survival benefit

Shielding Effectiveness of Laminated Shields

Shielding prevents coupling of undesired radiated electromagnetic energy into equipment otherwise susceptible to it. In view of this, some studies on shielding effectiveness of laminated shields with conductors and conductive polymers using plane-wave theory are carried out in this paper. The plane wave shielding effectiveness of new combination of these materials is evaluated as a function of frequency and thickness of material. Conductivity of the polymers, measured in previous investigations by the cavity perturbation technique, is used to compute the overall reflection and transmission coefficients of single and multiple layers of the polymers. With recent advances in synthesizing stable highly conductive polymers these lightweight mechanically strong materials appear to be viable alternatives to metals for EM1 shielding

Design and Analysis of Novel Fractal Linear and Planar Array Antennas for Satellite Applications

This article proposed a new geometric design methodology for the systematic expansion of fractal linear and planar array antennas. Using this proposed geometric design methodology any deterministic polygon shape can be constructed. In this article, two element fractal linear and triangular array antennas are examined using proposed methodology up to four iterations of two expansion factors. Due to the repetitive nature of the proposed geometric design methodology, both linear and planar fractal arrays shows multi-beam behavior with excellent array factor properties. The behavior of the proposed arrays shows better performance than linear and planar fractal array antennas generated by concentric circular ring sub array geometric generator. Triangular planar fractal array of expansion factor two at fourth iteration achieved a single valued beam width of 3.80 with -31.6 side lobe level. The suggested fractal arrays are analyzed and simulated by MATLAB-13 programming

Investigation of the Effect of Normal Incidence of RF Wave on Human Head Tissues Employing Cu and Ni Grid PET Films

The rising number of frequency bands and the demand for wireless communication devices has become a growing concern regarding health and safety. The human head is a vulnerable body part when exposed to mobile phones. To ensure a high level of protection of the head from undesirable Electromagnetic Field (EMF) emissions, a shield is incorporated in this paper between the head and the mobile smartphone. The shielding material used to protect the head from the RF emissions is Copper (Cu) grid transparent Polyethylene Terephthalate (PET) film and Copper (Cu) grid transparent PET film with Nickel (Ni) coating forming a laminated mesh. The RF emission metric from the smartphone is determined to evaluate the Specific Absorption Rate (SAR) numerically with a variation in frequencies ranging from 850MHz to 5.47GHz at normal wave incidence by the Transmission Line Method. The variation in frequency is observed in two head models, one of an adult and one of a child. Compared with the no shield condition, a significant SAR reduction is observed when PET-Cu or PET-Cu-Ni conductive coating transparent shielded mesh is embodied on the front part of the mobile phone between the phone and the head. In the child 7-layered head model at 5.47GHz, a significant reduction in SAR is observed from 10.5W/kg to 0.00001W/kg using the Cu grid PET film and to 0.0000032W/kg using Cu and Ni grid PET film

IUPS Physiology Education Workshop series in India: organizational mechanics, outcomes, and lessons

Peer reviewe

Operations perspective to competency-based medical education: Experiences of IUPS-ICMR Physiology Education Workshop series (2018-2019) conducted in India

Peer reviewe

Multiscale multifactorial approaches for engineering tendon substitutes

The physiology of tendons and the continuous strains experienced daily make tendons very prone to injury. Excessive and prolonged loading forces and aging also contribute to the onset and progression of tendon injuries, and conventional treatments have limited efficacy in restoring tendon biomechanics. Tissue engineering and regenerative medicine (TERM) approaches hold the promise to provide therapeutic solutions for injured or damaged tendons despite the challenging cues of tendon niche and the lack of tendon-specific factors to guide cellular responses and tackle regeneration. The roots of engineering tendon substitutes lay in multifactorial approaches from adequate stem cells sources and environmental stimuli to the construction of multiscale 3D scaffolding systems. To achieve such advanced tendon substitutes, incremental strategies have been pursued to more closely recreate the native tendon requirements providing structural as well as physical and chemical cues combined with biochemical and mechanical stimuli to instruct cell behavior in 3D architectures, pursuing mechanically competent constructs with adequate maturation before implantation.Authors acknowledge the project “Accelerating tissue engineering and personalized medicine discoveries by the integration of key enabling nanotechnologies, marinederived biomaterials and stem cells,” supported by Norte Portugal Regional Operational Programme (NORTE 2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (ERDF). Authors acknowledge the H2020 Achilles Twinning Project No. 810850, and also the European Research Council CoG MagTendon No. 772817, and the FCT Project MagTT PTDC/CTM-CTM/ 29930/2017 (POCI-01-0145-FEDER-29930