41,901 research outputs found
Recommended from our members
Prospect of Making Ceramic Shell Mold by Ceramic Laser Fusion
Manufacturing prototypical castings by conventional investment casting not only takes
several weeks, but also is prohibitively expensive. Z Corporation in USA, EOS GmbH and
IPT in Germany employ the techniques of 3DP and SLS respectively to make directly ceramic
shell molds for metal castings. Although those techniques dramatically reduce time
expenditure and production cost, each layer cannot be thinner than 50 µm because of using
powder to pave layers. The dimensional accuracy and roughness of the castings still cannot
meet the specification of precision casting. Therefore, in this paper the ceramic laser fusion
(CLF) was used to pave layers. Each layer can be thinner than 25 µm, so that the step effect
can be diminished and the workpiece surface can be smoother; drying time will be shortened
dramatically. Moreover, the inherent solid-state support formed by green portion has the
capability of preventing upward and downward deformation of the scanned cross sections. In
order to make shell mold which meets the roughness requirement (Rq=3.048µm) of the
precision casting, following issues have to be further studied: (1) design a proper ceramic
shell mold structure, (2) design a paving chamber for paving a complete green layer which
can be easily collapsed, (3) cut down drying time, (4) optimize laser scanning process
parameters with the smallest distortion, (5) eliminate sunken area, (6) reduce layer thickness
to less than13µm, (7) control power to guarantee the energy uniformly absorbed by workpiece,
and (8) develop a method which can directly clean green portion in cavity from gate.Mechanical Engineerin
Pre-flare coronal dimmings
In this paper, we focus on the pre-flare coronal dimmings. We report our
multiwavelength observations of the GOES X1.6 solar flare and the accompanying
halo CME produced by the eruption of a sigmoidal magnetic flux rope (MFR) in
NOAA active region (AR) 12158 on 2014 September 10. The eruption was observed
by the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamic Observatory
(SDO). The photospheric line-of-sight magnetograms were observed by the
Helioseismic and Magnetic Imager (HMI) aboard SDO. The soft X-ray (SXR) fluxes
were recorded by the GOES spacecraft. The halo CME was observed by the white
light coronagraphs of the Large Angle Spectroscopic Coronagraph (LASCO) aboard
SOHO.} {About 96 minutes before the onset of flare/CME, narrow pre-flare
coronal dimmings appeared at the two ends of the twisted MFR. They extended
very slowly with their intensities decreasing with time, while their apparent
widths (89 Mm) nearly kept constant. During the impulsive and decay phases
of flare, typical fanlike twin dimmings appeared and expanded with much larger
extent and lower intensities than the pre-flare dimmings. The percentage of 171
{\AA} intensity decrease reaches 40\%. The pre-flare dimmings are most striking
in 171, 193, and 211 {\AA} with formation temperatures of 0.62.5 MK. The
northern part of the pre-flare dimmings could also be recognized in 131 and 335
{\AA}.} To our knowledge, this is the first detailed study of pre-flare coronal
dimmings, which can be explained by the density depletion as a result of the
gradual expansion of the coronal loop system surrounding the MFR during the
slow rise of the MFR.Comment: 6 pages, 8 figures, to be accepted for publication by A&
Nonconical theory of flow past slender wing bodies with leading-edge separation
Nonconical theory of flow past slender wing bodies with leading edge separatio
- …