Applications of Biological Flocculants (BFs) for Coagulation Treatment in Water Purification: Turbidity Elimination

In this study, coagulation performance by using biological flocculants (BFs; produced from strain Bacillus sp. F6) for turbidity removal was investigated. The results demonstrated that BFs were able to eliminate turbidity from kaolin clay solution over a wide dosage range (γDR = 6-20 mg L-1). The removal efficiency with BFs reached 86 % on average, lower than 95 % with Al2(SO4)3 (γAl = 6.5 mg L-1) and 96 % with Fe2(SO4)3 (γFe = 10 mg L-1), respectively. For bioflocculants, bridging flocculation other than charge neutralization should be responsible for turbidity removal. The combined applications of BFs with Al2(SO4)3 (ζAl/BF = 0.33) and Fe2(SO4)3 (ζFe/BF = 0.05) increased overall turbidity removal up to 97 %. It was also shown that combination of BFs and Fe2(SO4)3 was effective for removing turbidity from raw water. This study provides a proof-in-concept demonstration of BFs for water purification, which can in part reduce operational costs in coagulation treatment, as well, effectively reduce the concentration of residual metallic elements (e.g. aluminum) in coagulated solution

Applications of Biological Flocculants (BFs) for Coagulation Treatment in Water Purification: Turbidity Elimination

In this study, coagulation performance by using biological flocculants (BFs; produced from strain Bacillus sp. F6) for turbidity removal was investigated. The results demonstrated that BFs were able to eliminate turbidity from kaolin clay solution over a wide dosage range (γDR = 6-20 mg L-1). The removal efficiency with BFs reached 86 % on average, lower than 95 % with Al2(SO4)3 (γAl = 6.5 mg L-1) and 96 % with Fe2(SO4)3 (γFe = 10 mg L-1), respectively. For bioflocculants, bridging flocculation other than charge neutralization should be responsible for turbidity removal. The combined applications of BFs with Al2(SO4)3 (ζAl/BF = 0.33) and Fe2(SO4)3 (ζFe/BF = 0.05) increased overall turbidity removal up to 97 %. It was also shown that combination of BFs and Fe2(SO4)3 was effective for removing turbidity from raw water. This study provides a proof-in-concept demonstration of BFs for water purification, which can in part reduce operational costs in coagulation treatment, as well, effectively reduce the concentration of residual metallic elements (e.g. aluminum) in coagulated solution

A balanced homodyne detector for high-rate Gaussian-modulated coherent-state quantum key distribution

We discuss excess noise contributions of a practical balanced homodyne detector in Gaussian-modulated coherent-state (GMCS) quantum key distribution (QKD). We point out the key generated from the original realistic model of GMCS QKD may not be secure. In our refined realistic model, we take into account excess noise due to the finite bandwidth of the homodyne detector and the fluctuation of the local oscillator. A high speed balanced homodyne detector suitable for GMCS QKD in the telecommunication wavelength region is built and experimentally tested. The 3dB bandwidth of the balanced homodyne detector is found to be 104MHz and its electronic noise level is 13dB below the shot noise at a local oscillator level of 8.5*10^8 photon per pulse. The secure key rate of a GMCS QKD experiment with this homodyne detector is expected to reach Mbits/s over a few kilometers.Comment: 22 pages, 11 figure

Constitutive modeling of steel-polypropylene hybrid fiber reinforced concrete using a non-associated plasticity and its numerical implementation

This paper presents a non-associated plasticity-based constitutive model for hybrid steel–polypropylene fiber reinforced concrete (HFRC) materials in an attempt to characterize the stress–strain responses under multiaxial loading scenarios. Together with a five-parameter loading surface and uncoupled hardening and softening regimes, a nonlinear plastic potential function is particularly introduced into the constitutive model with the material constants experimentally determined through a true triaxial compression test, which allows a more accurate estimation of the volumetric dilatency of HFRC. The influence of fiber parameters on the plastic flow direction is also addressed. Furthermore, the developed model is implemented into ABAQUS finite element package through a User-defined Material (UMAT) subroutine that can be applicable for the convenient use in numerical simulation of HFRC materials. A substepping scheme with error control for integrating the elasto-plastic stress–strain rate equations is presented in detail. Subsequently, the proposed model is evaluated by available multiaxial compression test results of both plain concrete and FRC reported by other researchers. It is shown that the constitutive model can realistically capture the stress–strain responses as well as the volumetric deformation of HFRC having various fiber reinforcement indices

Models of Social Groups in Blogosphere Based on Information about Comment Addressees and Sentiments

This work concerns the analysis of number, sizes and other characteristics of groups identified in the blogosphere using a set of models identifying social relations. These models differ regarding identification of social relations, influenced by methods of classifying the addressee of the comments (they are either the post author or the author of a comment on which this comment is directly addressing) and by a sentiment calculated for comments considering the statistics of words present and connotation. The state of a selected blog portal was analyzed in sequential, partly overlapping time intervals. Groups in each interval were identified using a version of the CPM algorithm, on the basis of them, stable groups, existing for at least a minimal assumed duration of time, were identified.Comment: Gliwa B., Ko\'zlak J., Zygmunt A., Models of Social Groups in Blogosphere Based on Information about Comment Addressees and Sentiments, in the K. Aberer et al. (Eds.): SocInfo 2012, LNCS 7710, pp. 475-488, Best Paper Awar

Screening of patients with tuberculosis for diabetes mellitus in China.

Objective  There is a high burden of both diabetes (DM) and tuberculosis (TB) in China, and this study aimed to assess feasibility and results of screening patients with TB for DM within the routine healthcare setting of six health facilities. Method  Agreement on how to screen, monitor and record was reached in May 2011 at a stakeholders' meeting, and training was carried out for staff in the six facilities in July 2011. Implementation started in September 2011, and we report on 7 months of activities up to 31 March 2012. Results  There were 8886 registered patients with TB. They were first asked whether they had DM. If the answer was no, they were screened with a random blood glucose (RBG) followed by fasting blood glucose (FBG) in those with RBG ≥ 6.1 mm (one facility) or with an initial FBG (five facilities). Those with FBG ≥ 7.0 mm were referred to DM clinics for diagnostic confirmation with a second FBG. Altogether, 1090 (12.4%) patients with DM were identified, of whom 863 (9.7%) had a known diagnosis of DM. Of 8023 patients who needed screening for DM, 7947 (99%) were screened. This resulted in a new diagnosis of DM in 227 patients (2.9% of screened patients), and of these, 226 were enrolled to DM care. In addition, 575 (7.8%) persons had impaired fasting glucose (FBG 6.1 to <7.0 mm). Prevalence of DM was significantly higher in patients in health facilities serving urban populations (14.0%) than rural populations (10.6%) and higher in hospital patients (13.5%) than those attending TB clinics (8.5%). Conclusion  This pilot project shows that it is feasible to screen patients with TB for DM in the routine setting, resulting in a high yield of patients with known and newly diagnosed disease. Free blood tests for glucose measurement and integration of TB and DM services may improve the diagnosis and management of dually affected patients