97,348 research outputs found
Recommended from our members
TDLAS Detection of propane and butane gas over the near-infrared wavelength range from 1678nm to 1686nm
It is important in the petrochemical industry that there are high sensitivity, high accuracy, low-power consumption and intrinsically safe methods for the detection of propane, butane and their gas mixtures, to provide early warning of potential explosion hazards during both storage and transportation of oil and gas. This paper proposes a 'proof of principle' method for the detection of propane and butane using a Tunable Diode Laser Absorption Spectroscopy (TDLAS) technique over the near-infrared wavelength range from 1678nm to 1686nm. This method is relatively inexpensive to implement and is thus more practical, compared with detection methods using wavelengths further into the infra-red, near 3.3μm. The minimum detectable concentration was found to be low as 300ppm for propane or butane. Importantly, the relative measurement errors were all below 3% LEL, which meets the requirements from the petrochemical and oil-gas storage and transportation industries for a field-based system for monitoring of combustible gases
Recommended from our members
Shock wave boundary layer interaction studied by high-speed schlieren
Shock wave boundary layer interactions at compression ramps have been examined by high-speed schlieren. A total of six ramps with angles ranging from 20 deg to 30 deg, the ramp angle effect on the SWBLI is thus studied. The present high-speed schlieren with a frame rate of 20 kHz generates a large ensemble of 9000 images, which secures the convergence of the statistics of the schlieren intensity. The rms of the schlieren intensity is of great interest, as it enables visualisation of the flow features that are not observable in the raw schlieren images, such as the corner separation/low momentum region, the spot of strong flow unsteadiness right after the shock wave and the location of the peak fluctuation over the ramp. Through the present systematic experimental investigation of SWBLI, the highspeed schlieren is demonstrated to be of great capability for SWBLI study
Tunable subpicosecond electron bunch train generation using a transverse-to-longitudinal phase space exchange technique
We report on the experimental generation of a train of subpicosecond electron
bunches. The bunch train generation is accomplished using a beamline capable of
exchanging the coordinates between the horizontal and longitudinal degrees of
freedom. An initial beam consisting of a set of horizontally-separated beamlets
is converted into a train of bunches temporally separated with tunable bunch
duration and separation. The experiment reported in this Letter unambiguously
demonstrates the conversion process and its versatility.Comment: 4 pages, 5 figures, 1 table; accepted for publication in PR
Microscopic Description of Band Structure at Very Extended Shapes in the A ~ 110 Mass Region
Recent experiments have confirmed the existence of rotational bands in the A
\~ 110 mass region with very extended shapes lying between super- and
hyper-deformation. Using the projected shell model, we make a first attempt to
describe quantitatively such a band structure in 108Cd. Excellent agreement is
achieved in the dynamic moment of inertia J(2) calculation. This allows us to
suggest the spin values for the energy levels, which are experimentally
unknown. It is found that at this large deformation, the sharply down-sloping
orbitals in the proton i_{13/2} subshell are responsible for the irregularity
in the experimental J(2), and the wave functions of the observed states have a
dominant component of two-quasiparticles from these orbitals. Measurement of
transition quadrupole moments and g-factors will test these findings, and thus
can provide a deeper understanding of the band structure at very extended
shapes.Comment: 4 pages, 3 eps figures, final version accepted by Phys. Rev. C as a
Rapid Communicatio
Recommended from our members
A Sensitive and Reliable Carbon Monoxide Monitor for Safety-Focused Applications in Coal Mine Using a 2.33- m Laser Diode
In this paper, a stable and reliable carbon monoxide (CO) monitoring system with high sensitivity (at sub-ppm level) was designed and demonstrated with particular reference to use in the mining industry, tailoring the design specifically for forecasting spontaneous combustion, a major hazard to miners. An appropriate strong CO absorption line was used to minimize the interferences expected from gases present in ambient air, with several preferred CO absorption lines selected and investigated, therefore choosing a distributed feedback (DFB) laser operating at a wavelength of 2330.18 nm as the excitation source. Through a detailed investigation, a minimum detection limit of ~0.2 ppm and a measurement precision of <50 ppb were achieved with a 1 s averaging time. Further in tests, a long-term continuous monitoring evaluation was carried out, demonstrated the excellent stability and reliability of the developed CO monitor. The results obtained have validated the potential of this design of a CO monitoring system for practical monitoring applications underground to enhance safety in the mining industry
- …