60 research outputs found
Space efficient opposed-anvil high-pressure cell and its application to optical and NMR measurements up to 9 GPa
We have developed a new type of opposed-anvil high pressure cell with
substantially improved space efficiency. The clamp cell and the gasket are made
of non-magnetic Ni-Cr-Al alloy. Non-magnetic tungsten carbide (NMWC) is used
for the anvils. The assembled cell with the dimension \phi 29mm \times 41mm is
capable of generating pressure up to 9 GPa over a relatively large volume of 7
mm3. Our cell is particularly suitable for those experiments which require
large sample space to achieve good signal-to-noise ratio, such as the nuclear
magnetic resonance (NMR) experiment. Argon is used as the pressure transmitting
medium to obtain good hydrostaticity. The pressure was calibrated in situ by
measuring the fluorescence from ruby through a transparent moissanite (6H-SiC)
window. We have measured the pressure and temperature dependences of the 63Cu
nuclear-quadrupole-resonance (NQR) frequency of Cu2O, the in-plane Knight shift
of metallic tin, and the Knight shift of platinum. These quantities can be used
as reliable manometers to determine the pressure values in situ during the
NMR/NQR experiments up to 9 GPa.Comment: 9 pages, 5 figures, 3 tables, accepted for publication in J. Phys.
Soc. Jp
Laser-Shock Compression and Hugoniot Measurements of Liquid Hydrogen to 55 GPa
The principal Hugoniot for liquid hydrogen was obtained up to 55 GPa under
laser-driven shock loading. Pressure and density of compressed hydrogen were
determined by impedance-matching to a quartz standard. The shock temperature
was independently measured from the brightness of the shock front. Hugoniot
data of hydrogen provide a good benchmark to modern theories of condensed
matter. The initial number density of liquid hydrogen is lower than that for
liquid deuterium, and this results in shock compressed hydrogen having a higher
compression and higher temperature than deuterium at the same shock pressure.Comment: 8 pages, 7 figures, 2 tables, accepted for publication in Physical
Review
Ultrafast observation of lattice dynamics in laser-irradiated gold foils
We have observed the lattice expansion before the onset of compression in an optical-laser-driven target, using diffraction of femtosecond X-ray beams generated by the SPring-8 Angstrom Compact Free-electron Laser. The change in diffraction angle provides a direct measure of the lattice spacing, allowing the density to be calculated with a precision of ±1%. From the known equation of state relations, this allows an estimation of the temperature responsible for the expansion as <1000 K. The subsequent ablation-driven compression was observed with a clear rise in density at later times. This demonstrates the feasibility of studying the dynamics of preheating and shock formation with unprecedented detail.N. J. Hartley, N. Ozaki, T. Matsuoka, B. Albertazzi, A. Faenov, Y. Fujimoto, H. Habara, M. Harmand, Y. Inubushi, T. Katayama, M. Koenig, A. Krygier, P. Mabey, Y. Matsumura, S. Matsuyama, E. E. McBride, K. Miyanishi, G. Morard, T. Okuchi, T. Pikuz, O. Sakata, Y. Sano, T. Sato, T. Sekine, Y. Seto, K. Takahashi, K. A. Tanaka, Y. Tange, T. Togashi, Y. Umeda, T. Vinci, M. Yabashi, T. Yabuuchi, K. Yamauchi, and R. Kodama , "Ultrafast observation of lattice dynamics in laser-irradiated gold foils", Appl. Phys. Lett. 110, 071905 (2017) https://doi.org/10.1063/1.4976541
Indirect monitoring shot-to-shot shock waves strength reproducibility during pump-probe experiments
We present an indirect method of estimating the strength of a shock wave, allowing on line monitoring of its reproducibility in each laser shot. This method is based on a shot-to-shot measurement of the X-ray emission from the ablated plasma by a high resolution, spatially resolved focusing spectrometer. An optical pump laser with energy of 1.0 J and pulse duration of ∼660 ps was used to irradiate solid targets or foils with various thicknesses containing Oxygen, Aluminum, Iron, and Tantalum. The high sensitivity and resolving power of the X-ray spectrometer allowed spectra to be obtained on each laser shot and to control fluctuations of the spectral intensity emitted by different plasmas with an accuracy of ∼2%, implying an accuracy in the derived electron plasma temperature of 5%-10% in pump-probe high energy density science experiments. At nano- and sub-nanosecond duration of laser pulse with relatively low laser intensities and ratio Z/A ∼ 0.5, the electron temperature follows Te ∼ Ilas2/3. Thus, measurements of the electron plasma temperature allow indirect estimation of the laser flux on the target and control its shot-to-shot fluctuation. Knowing the laser flux intensity and its fluctuation gives us the possibility of monitoring shot-to-shot reproducibility of shock wave strength generation with high accuracy.T. A. Pikuz, A. Ya. Faenov, N. Ozaki, N. J. Hartley, B. Albertazzi, T. Matsuoka, K. Takahashi, H. Habara, Y. Tange, S. Matsuyama, K. Yamauchi, R. Ochante, K. Sueda, O. Sakata, T. Sekine, T. Sato, Y. Umeda, Y. Inubushi, T. Yabuuchi, T. Togashi, T. Katayama, M. Yabashi, M. Harmand, G. Morard, M. Koenig, V. Zhakhovsky, N. Inogamov, A. S. Safronova, A. Stafford, I. Yu. Skobelev, S. A. Pikuz, T. Okuchi, Y. Seto, K. A. Tanaka, T. Ishikawa, and R. Kodama, "Indirect monitoring shot-to-shot shock waves strength reproducibility during pump–probe experiments", Journal of Applied Physics 120, 035901 (2016) https://doi.org/10.1063/1.4958796
Carbon and other light element contents in the Earth's core based on first-principles molecular dynamics
Filament perforation model for mouse subarachnoid hemorrhage: surgical-technical considerations
Objective: Mouse subarachnoid hemorrhage (SAH) models are becoming increasingly important. We aimed to report and discuss the detailed technical-surgical approach and difficulties associated with the circle of Willis perfo-ration (cWp) model, with reference to the existing literature.
Methods: First, the cWp model was reproduced using ddY mice following scarification at 0 h, Days 1, 2, and 3 after SAH. Second, C57BL/6 mice were subjected to SAH with histo-logical examination on Days 1, 2, and 3. Sham-operated mice were sacrificed on Day 2. Neurological performance, amount of subarachnoid blood, cerebral vasospasm (CVS), and neuronal injury were assessed. Relevant articles found in the MEDLINE database were reviewed.
Results: Induction of SAH was successfully reproduced. The volume of subarachnoid blood decreased with time due to resorption. Neurological performance was worse in SAH compared with sham. Signs of CVS could be confirmed on Days 2 and 3, but not Day 1. The cumulative number of micro-thrombi was significantly higher on Days 2 and 3, but not Day 1. Apoptotic and degenerative neurons were found in the cortex and hippocampal area. Our review of the literature revealed the cWp model to be the most frequently used. The present findings largely confirmed previously published results. However, detailed technical-surgical description and its discussion were sparse, which we provide here.
Conclusions: The current study provides additional useful information characterizing the cWp model. This model may be of first choice at present, as important pathologies can be reproduced and most findings in the literature are based on it
Liquid Structure of Tantalum under Internal Negative Pressure
International audienceIn situ femtosecond x-ray diffraction measurements and ab initio molecular dynamics simulations were performed to study the liquid structure of tantalum shock released from several hundred gigapascals (GPa) on the nanosecond timescale. The results show that the internal negative pressure applied to the liquid tantalum reached −5.6 ð0.8Þ GPa, suggesting the existence of a liquid-gas mixing state due to cavitation. This is the first direct evidence to prove the classical nucleation theory which predicts that liquids with high surface tension can support GPa regime tensile stress
- …