Swelling of acetylated wood in organic liquids

To investigate the affinity of acetylated wood for organic liquids, Yezo spruce wood specimens were acetylated with acetic anhydride, and their swelling in various liquids were compared to those of untreated specimens. The acetylated wood was rapidly and remarkably swollen in aprotic organic liquids such as benzene and toluene in which the untreated wood was swollen only slightly and/or very slowly. On the other hand, the swelling of wood in water, ethylene glycol and alcohols remained unchanged or decreased by the acetylation. Consequently the maximum volume of wood swollen in organic liquids was always larger than that in water. The effect of acetylation on the maximum swollen volume of wood was greater in liquids having smaller solubility parameters. The easier penetration of aprotic organic liquids into the acetylated wood was considered to be due to the scission of hydrogen bonds among the amorphous wood constituents by the substitution of hydroxyl groups with hydrophobic acetyl groups.Comment: to be published in J Wood Science (Japanese wood research society

A continuum damage mechanics model with the strain-based approach to biaxial low cycle fatigue failure

Abstract A continuum damage mechanics model for low cycle fatigue failure of initially isotropic materials under biaxial loading conditions is presented. The expression for the equivalent strain in the fatigue damage evolution equation contains the three material parameters, and the strain intensity as well as the maximum principal strain and the volume strain for amplitudes. It is shown how these material parameters can be determined from a series of basic experiments using a cruciform specimen. Particular expressions for the equivalent strain with a smaller number of material parameters and invariants are obtained. Model predictions are found to be in satisfactory agreement with the experimental low cycle fatigue data under full ranged biaxial loadings obtained in the test using a cruciform specimen. Ein mechanische

Characterisation and categorisation of the diversity in viscoelastic vibrational properties between 98 wood types

International audienceContext Increased knowledge on diversity in wood properties would have implications both for fundamental research and for promoting a diversification of uses as material. *Aims The objective is to contribute to overcoming the critical lack of data on the diversity of wood dynamic mechanical/viscoelastic vibrational properties, by testing lesser-known species and categorizing sources of variability. *Methods Air-dry axial specific dynamic modulus of elasticity (E'/γ) and damping coefficient (tanδ) were measured on a wide sampling (1792 specimens) of 98 wood types from 79 species. An experimental device and protocol was designed for conducting systematic (i.e. rapid and reproducible) characterizations. *Results Diversity at the specimens' level corroborates the "standard" relationship between tanδ and E'/γ, which is discussed in terms of orientation of wood elements and of chemical composition. Diversity at the species level is expressed on the basis of results for normal heartwood, with specific gravity (γ) ranging from 0.2 to 1.3. Axial E'/γ ranges from 9 to 32 GPa and tanδ from 4×10-3 to 19×10-3. Properties distribution follows a continuum, but with group characteristics. The lowest values of tanδ are only found in certain tropical hardwoods. Results can also suggest alternative species for musical instruments making

Control of Length and Spatial Functionality of Single-Wall Carbon Nanotube AFM Nanoprobes

Single-wall carbon nanotube (SWNT) nanofibrils were assembled onto conductive atomic force microscopy (AFM) probes with the help of dielectrophoresis (DEP). This process involved the application of a 10 V, 2 MHz, AC bias between a metal-coated AFM probe and a dilute suspension of SWNTs. This exerted a positive dielectrophoretic force onto the nanotubes that caused them to align while precipitating out onto the probe. The gradual removal of the AFM probe away from the SWNT suspension consolidated these nanotubes into nanofibrils with a high degree of alignment as demonstrated with polarization Raman experiments. By varying the pulling speed, immersion time, and concentration of the SWNT suspension, one can tailor the diameter and thus the stiffness of these probes. Precise length trimming of these nanofibrils was also performed by their gradual immersion and dissolution into a liquid that strongly interacted with nanotubes, (i.e., sodium dodecyl sulfate (SDS) solution). Vacuum annealing these nanoprobes at temperature up to 450 degree C further increased their stiffness and rendered them insoluble to SDS and all other aqueous media. Regrowth of a new SWNT nanofibril from the side or at the end of a previously grown SWNT nanofibril was also demonstrated by a repeated dielectrophoretic assembly at the desired immersion depth. These SWNT nanofibril-equipped AFM probes are electrically conductive and mechanically robust for use as high-aspect-ratio electrochemical nanoprobes

Advances and Prospect of Nanotechnology in Stem Cells

In recent years, stem cell nanotechnology has emerged as a new exciting field. Theoretical and experimental studies of interaction between nanomaterials or nanostructures and stem cells have made great advances. The importance of nanomaterials, nanostructures, and nanotechnology to the fundamental developments in stem cells-based therapies for injuries and degenerative diseases has been recognized. In particular, the effects of structure and properties of nanomaterials on the proliferation and differentiation of stem cells have become a new interdisciplinary frontier in regeneration medicine and material science. Here we review some of the main advances in this field over the past few years, explore the application prospects, and discuss the issues, approaches and challenges, with the aim of improving application of nanotechnology in the stem cells research and development