15 research outputs found
The Use of Integrative Therapies in Patients with Amyotrophic Lateral Sclerosis in Shanghai, China
Objective. To investigate the current use of integrative therapies (IT) in the treatment of patients with amyotrophic lateral sclerosis (ALS). Methods. A cross-sectional, multicenter clinical epidemiological survey was conducted in 12 hospitals in Shanghai. We investigated the type and frequency of IT use and determined whether the use of IT correlated with demographic, social, or disease-specific characteristics in our patient population. Results. A total of 231 (89.5%) of 258 patients with ALS were eligible for the study and 229 (99% of all) of 231 reported the use of at least one IT for the treatment of ALS. Vitamins and Chinese herb decoctions, Chinese herb compounds, massage therapy, and acupuncture were the 5 most commonly used therapies. There was a strong association between education level, income, and use of IT. A household income of more than 75,000 RMB ($49,995) correlated with multiple IT use, and married patients used IT more often than single individuals. The main reasons for using IT were to treat weakness and fatigue, muscle atrophy, the development of ALS, depression, insomnia, limb pain or numbness, and side effects associated with Riluzole. Conclusion. The use of IT is common in patients with ALS in Shanghai. Vitamins and TCM are the most used additional therapies and the widespread and largely unexamined use of IT for ALS requires more attention
Experimental Study on Pot Damage and Contact Stress Distribution Characteristics of Oil Sunflower Plug Seedlings
To reveal the collision damage mechanisms of plug seedlings and improve the quality of seedlings, the kinetics equations of the plug seedlings were established based on the generalized Hertz-theory. The influence laws of different factors on pot damage were obtained through a drop impact test. The Tekscan pressure distribution measurement system measured the collision impact force, and the orthogonal tests were conducted. The test showed that the influence of the collision impact force was on the order of plug specification > drop height > contact material. The Tekscan pressure distribution measurement system measured the change law of contact stress distribution under significant influencing factors. The test results showed that the collision contact area between the plug seedlings and contact materials from large to small was soil, steel, and ABS plastic. The collision contact area between the plug seedlings and other plug specifications was 50 plug, 72 plug, and 105 plug from the largest to the smallest. When the plug seedlings collided with contact materials, the average contact stress between the seedlings and the steel plate ranged from 19.4 kPa to 22.8 kPa. When the plug seedlings of various sizes collided with steel plates, the average contact stress was ordered as 105 plug, 72 plug and 50 plug in descending order. A linear regression model between collision impact force and matrix loss rate under different factors was established based on the pressure data collected by the Tekscan pressure distribution measurement system. This study provides a basis for exploring the impact damage mechanisms of plug seedlings and improving the seedling quality
Experimental Research and Analysis of Soil Disturbance Behavior during the Hole Drilling Process of a Hanging-Cup Transplanter by DEM
This study provides a basis for designing and optimizing the key components of hanging-cup transplanters. The discrete element method, a high-speed photography test, and indoor soil bin tests were used to explore soil disturbance behavior during the hole drilling process. A comparative analysis of the discrete element method and the high-speed photography test indicated that soil particles are mainly affected by the coupled effects of the shear force and the squeezing force of the planter. The soil disturbance range in the horizontal and longitudinal sections gradually increases with the movement of the planter. The change in the soil particle velocity of the horizontal and longitudinal sections in different zones shows a trend of first increasing, then decreasing, and finally stabilizing. The velocity of soil particles in the longitudinal section varies significantly in the direction of burial. The soil in the horizontal section mainly moves to both sides when the duckbill is opened. The closer the soil particles are to the outer wall of the duckbill, the greater the change in velocity is. The soil bin tests and simulations were carried out under different conditions, but the change trend of the simulation results is consistent with the soil bin test results, proving that the simulation model is reliable. With the forward speed of the transplanter, planting depth, and soil compactness as the test factors, and the hole depth and hole longitudinal length as the response values, an orthogonal test of three factors and three levels was designed. A regression model between each element and response value was established. The optimal parameter combination was obtained when the forward speed was 1.25 km/h, the planting depth was 80 mm, and the soil firmness was 140~150 (N/cm2); these results were experimentally verified
Atmospheric Vapor Impact on Desert Vegetation and Desert Ecohydrological System
The ability of plants to absorb unsaturated atmospheric water vapor is a controversial topic. To study how vegetation in arid areas survives under limited water resources, this study uses Tamarisk in the Ulan Buh Desert of China as an example. The in-situ observation of a newly designed Lysimeter and sap flow meter system were used to monitor the precipitation infiltration and the utilization efficiency of Tamarisk of atmospheric vapor. The results show that the annual precipitation of 84 mm in arid areas could still result in deep soil recharge (DSR) with a recharge rate of 5 mm/year. Furthermore, DSR is detectable even in the winter, and the 5-year average DSR was 5.77% of the annual precipitation. It appears that the small precipitation events are critically important for the survival of Tamarisk. When the atmospheric relative humidity reaches 70%, Tamarisk leaves can absorb the unsaturated atmospheric vapor, which accounts for 13.2% of the annual precipitation amount. To adapt to the arid environment, Tamarisk can harvest its water supply from several sources including atmospheric vapor and micro-precipitation events (whose precipitation is below the measurement limit of 0.2 mm of the precipitation gauge) and can still permit a certain amount of recharge to replenish the deep soil moisture. Such an ecohydrological dynamic is of great significance to desert vegetation
The Use of Integrative Therapies in Patients with Amyotrophic Lateral Sclerosis in Shanghai, China
Objective. To investigate the current use of integrative therapies (IT) in the treatment of patients with amyotrophic lateral sclerosis (ALS). Methods. A cross-sectional, multicenter clinical epidemiological survey was conducted in 12 hospitals in Shanghai. We investigated the type and frequency of IT use and determined whether the use of IT correlated with demographic, social, or disease-specific characteristics in our patient population. Results. A total of 231 (89.5%) of 258 patients with ALS were eligible for the study and 229 (99% of all) of 231 reported the use of at least one IT for the treatment of ALS. Vitamins and Chinese herb decoctions, Chinese herb compounds, massage therapy, and acupuncture were the 5 most commonly used therapies. There was a strong association between education level, income, and use of IT. A household income of more than 75,000 RMB ($49,995) correlated with multiple IT use, and married patients used IT more often than single individuals. The main reasons for using IT were to treat weakness and fatigue, muscle atrophy, the development of ALS, depression, insomnia, limb pain or numbness, and side effects associated with Riluzole. Conclusion. The use of IT is common in patients with ALS in Shanghai. Vitamins and TCM are the most used additional therapies and the widespread and largely unexamined use of IT for ALS requires more attention
CDKN2BAS gene polymorphisms and the risk of intracranial aneurysm in the Chinese population
CEPC Technical Design Report -- Accelerator
The Circular Electron Positron Collider (CEPC) is a large scientific project initiated and hosted by China, fostered through extensive collaboration with international partners. The complex comprises four accelerators: a 30 GeV Linac, a 1.1 GeV Damping Ring, a Booster capable of achieving energies up to 180 GeV, and a Collider operating at varying energy modes (Z, W, H, and ttbar). The Linac and Damping Ring are situated on the surface, while the Booster and Collider are housed in a 100 km circumference underground tunnel, strategically accommodating future expansion with provisions for a Super Proton Proton Collider (SPPC). The CEPC primarily serves as a Higgs factory. In its baseline design with synchrotron radiation (SR) power of 30 MW per beam, it can achieve a luminosity of 5e34 /cm^2/s^1, resulting in an integrated luminosity of 13 /ab for two interaction points over a decade, producing 2.6 million Higgs bosons. Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons, facilitating precise measurements of Higgs coupling at sub-percent levels, exceeding the precision expected from the HL-LHC by an order of magnitude. This Technical Design Report (TDR) follows the Preliminary Conceptual Design Report (Pre-CDR, 2015) and the Conceptual Design Report (CDR, 2018), comprehensively detailing the machine's layout and performance, physical design and analysis, technical systems design, R&D and prototyping efforts, and associated civil engineering aspects. Additionally, it includes a cost estimate and a preliminary construction timeline, establishing a framework for forthcoming engineering design phase and site selection procedures. Construction is anticipated to begin around 2027-2028, pending government approval, with an estimated duration of 8 years. The commencement of experiments could potentially initiate in the mid-2030s
CEPC Technical Design Report -- Accelerator
International audienceThe Circular Electron Positron Collider (CEPC) is a large scientific project initiated and hosted by China, fostered through extensive collaboration with international partners. The complex comprises four accelerators: a 30 GeV Linac, a 1.1 GeV Damping Ring, a Booster capable of achieving energies up to 180 GeV, and a Collider operating at varying energy modes (Z, W, H, and ttbar). The Linac and Damping Ring are situated on the surface, while the Booster and Collider are housed in a 100 km circumference underground tunnel, strategically accommodating future expansion with provisions for a Super Proton Proton Collider (SPPC). The CEPC primarily serves as a Higgs factory. In its baseline design with synchrotron radiation (SR) power of 30 MW per beam, it can achieve a luminosity of 5e34 /cm^2/s^1, resulting in an integrated luminosity of 13 /ab for two interaction points over a decade, producing 2.6 million Higgs bosons. Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons, facilitating precise measurements of Higgs coupling at sub-percent levels, exceeding the precision expected from the HL-LHC by an order of magnitude. This Technical Design Report (TDR) follows the Preliminary Conceptual Design Report (Pre-CDR, 2015) and the Conceptual Design Report (CDR, 2018), comprehensively detailing the machine's layout and performance, physical design and analysis, technical systems design, R&D and prototyping efforts, and associated civil engineering aspects. Additionally, it includes a cost estimate and a preliminary construction timeline, establishing a framework for forthcoming engineering design phase and site selection procedures. Construction is anticipated to begin around 2027-2028, pending government approval, with an estimated duration of 8 years. The commencement of experiments could potentially initiate in the mid-2030s
CEPC Technical Design Report -- Accelerator
International audienceThe Circular Electron Positron Collider (CEPC) is a large scientific project initiated and hosted by China, fostered through extensive collaboration with international partners. The complex comprises four accelerators: a 30 GeV Linac, a 1.1 GeV Damping Ring, a Booster capable of achieving energies up to 180 GeV, and a Collider operating at varying energy modes (Z, W, H, and ttbar). The Linac and Damping Ring are situated on the surface, while the Booster and Collider are housed in a 100 km circumference underground tunnel, strategically accommodating future expansion with provisions for a Super Proton Proton Collider (SPPC). The CEPC primarily serves as a Higgs factory. In its baseline design with synchrotron radiation (SR) power of 30 MW per beam, it can achieve a luminosity of 5e34 /cm^2/s^1, resulting in an integrated luminosity of 13 /ab for two interaction points over a decade, producing 2.6 million Higgs bosons. Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons, facilitating precise measurements of Higgs coupling at sub-percent levels, exceeding the precision expected from the HL-LHC by an order of magnitude. This Technical Design Report (TDR) follows the Preliminary Conceptual Design Report (Pre-CDR, 2015) and the Conceptual Design Report (CDR, 2018), comprehensively detailing the machine's layout and performance, physical design and analysis, technical systems design, R&D and prototyping efforts, and associated civil engineering aspects. Additionally, it includes a cost estimate and a preliminary construction timeline, establishing a framework for forthcoming engineering design phase and site selection procedures. Construction is anticipated to begin around 2027-2028, pending government approval, with an estimated duration of 8 years. The commencement of experiments could potentially initiate in the mid-2030s
CEPC Technical Design Report -- Accelerator
International audienceThe Circular Electron Positron Collider (CEPC) is a large scientific project initiated and hosted by China, fostered through extensive collaboration with international partners. The complex comprises four accelerators: a 30 GeV Linac, a 1.1 GeV Damping Ring, a Booster capable of achieving energies up to 180 GeV, and a Collider operating at varying energy modes (Z, W, H, and ttbar). The Linac and Damping Ring are situated on the surface, while the Booster and Collider are housed in a 100 km circumference underground tunnel, strategically accommodating future expansion with provisions for a Super Proton Proton Collider (SPPC). The CEPC primarily serves as a Higgs factory. In its baseline design with synchrotron radiation (SR) power of 30 MW per beam, it can achieve a luminosity of 5e34 /cm^2/s^1, resulting in an integrated luminosity of 13 /ab for two interaction points over a decade, producing 2.6 million Higgs bosons. Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons, facilitating precise measurements of Higgs coupling at sub-percent levels, exceeding the precision expected from the HL-LHC by an order of magnitude. This Technical Design Report (TDR) follows the Preliminary Conceptual Design Report (Pre-CDR, 2015) and the Conceptual Design Report (CDR, 2018), comprehensively detailing the machine's layout and performance, physical design and analysis, technical systems design, R&D and prototyping efforts, and associated civil engineering aspects. Additionally, it includes a cost estimate and a preliminary construction timeline, establishing a framework for forthcoming engineering design phase and site selection procedures. Construction is anticipated to begin around 2027-2028, pending government approval, with an estimated duration of 8 years. The commencement of experiments could potentially initiate in the mid-2030s