A Lorentz Force EMAT Design with Racetrack Coil and Periodic Permanent Magnets for Selective Enhancement of Ultrasonic Lamb Wave Generation

This article proposes an electromagnetic acoustic transducer (EMAT) for selectively improving the purity and amplitude of ultrasonic Lamb waves in non-ferromagnetic plates. The developed EMAT consists of a racetrack coil and a group of periodic permanent magnets (PPMs). Two-dimensional finite element simulations and experiments are implemented to analyze the working mechanism and performance of the PPM EMAT. Thanks to the specific design, the eddy currents increase with increasing wire density and the directions of the magnetic fields and Lorentz forces alternate according to the polarities of the magnet units. Wires laid uniformly beneath the magnets, and the gaps between adjacent magnets generate tangential and normal Lorentz forces, resulting in-plane (IP) and out-of-plane (OP) displacements, respectively. The constructive interference occurs when the wavelength of the generated Lamb wave is twice the spacing of the magnets, leading to large amplitudes of the targeted ultrasonic Lamb waves. Therefore, the PPM EMAT is capable of generating pure symmetric or antisymmetric mode Lamb waves at respective frequencies. The results prove that the developed PPM EMAT can generate pure either S0 or A0 mode Lamb waves at respective frequencies. The increase in wire width and wire density further increases the signal amplitudes. Compared with the case of conventional meander-line-coil (MLC) EMAT, the amplitudes of the A0 and S0 mode Lamb waves of our PPM EMAT are increased to 880% and 328%, respectively

Localization and Imaging of Micro-Cracks Using Nonlinear Lamb Waves with Imperfect Group-Velocity Matching

Nonlinear Lamb waves have attracted increasing attention for detecting and identifying microstructural changes in structural health monitoring. However, most identification methods that determine the damage locations based on the intersections of the elliptical loci will inevitably cause positioning errors due to the change of the group velocity before and after interaction with the damage. In this work, a method focusing on elliptical rings was proposed for localization and imaging of micro-cracks in a three-dimensional structure using nonlinear Lamb waves with imperfect group-velocity matching. The width of the elliptical rings can be determined by the degree of the group-velocity mismatching of nonlinear S0 modes. The mode pair S0-s0, satisfying approximate group-velocity matching, is mainly introduced by interacting with the micro-crack. The effectiveness of the proposed methodology for damage localization is verified by the experimental testing and numerical simulation. Although the length of the being-tested small crack (about 1 mm) is smaller than the wavelength of the incident fundamental Lamb wave (around 20 mm), it can be well identified and localized using nonlinear Lamb waves. The experimental results show that the proposed method enables more reliable localization of the small crack with the crossover areas, as compared with the intersections based on the ellipse method. Furthermore, a breathing crack not situated in the propagation path can also be well localized by the proposed method in comparison with those by the probability-based diagnostic imaging in the simulation cases

The Mystery behind the Mid-Temperature Transition(s) in Vinylidenefluoride-based Homo-, Co- and Terpolymers – Has the Puzzle been Solved?

status: publishe

Ferroelectrets: Heterogenous polymer electrets with high piezoelectric sensitivity for transducers

Nowadays, the demand for advanced functional materials in transducer technology is growing rapidly. Piezoelectric materials transform mechanical variables (displacement or force) into electrical signals (charge or voltage) and vice versa. They are interesting from both fundamental and application points of view. Ferrooelectrets (also called piezoelectrets) are a relatively young group of piezo-, pyro- and ferroelectric materials. They exhibit ferroic behavior phenomenologically undistinguishable from that of traditional ferroelectrics, although the materials per se are essentially non-polar space-charge electrets with artificial macroscopic dipoles (i.e., internally charged cavities). A lot of work has been done on ferroelectrets and their applications up to now. In this paper, we review and discuss mostly the work done at University of Potsdam on the research and development of ferroelectrets. We will, however, also mention important results from other teams, and prospect the challenges and future progress trend of the field of ferroelectret research

Template-based fluoroethylenepropylene piezoelectrets with tubular channels for transducer applications

We describe the concept, the fabrication, and the most relevant properties of a piezoelectric-polymer system: Two fluoroethylenepropylene (FEP) films with good electret properties are laminated around a specifically designed and prepared polytetrafluoroethylene (PTFE) template at 300 degrees C. After removing the PTFE template, a two-layer FEP film with open tubular channels is obtained. For electric charging, the two-layer FEP system is subjected to a high electric field. The resulting dielectric barrier discharges inside the tubular channels yield a ferroelectret with high piezoelectricity. d(33) coefficients of up to 160 pC/N have already been achieved on the ferroelectret films. After charging at suitable elevated temperatures, the piezoelectricity is stable at temperatures of at least 130 degrees C. Advantages of the transducer films include ease of fabrication at laboratory or industrial scales, a wide range of possible geometrical and processing parameters, straightforward control of the uniformity of the polymer system, flexibility, and versatility of the soft ferroelectrets, and a large potential for device applications e.g., in the areas of biomedicine, communications, production engineering, sensor systems, environmental monitoring, etc.Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq), Brazil(DAAD) Deutscher Akademischer Austausch Dienst, GermanyUniversity of Potsdam, GermanyDeutsche Forschungsgemeinschaft (DFG)[QI 65/1-1

Dielectric and Electroacoustic Assessment of Screen-printed Piezoelectric Polymer Layers as Flexible Transducers: Influence of the Electrode Material

status: publishe