Controlling Molecular Orientation of Small Molecular Dopant-Free Hole-Transport Materials: Toward Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have great potential for future application. However, the commercialization of PSCs is limited by the prohibitively expensive and doped hole-transport materials (HTMs). In this regard, small molecular dopant-free HTMs are promising alternatives because of their low cost and high efficiency. However, these HTMs still have a lot of space for making further progress in both efficiency and stability. This review firstly provides outlining analyses about the important roles of molecular orientation when further enhancements in device efficiency and stability are concerned. Then, currently studied strategies to control molecular orientation in small molecular HTMs are presented. Finally, we propose an outlook aiming to obtain optimized molecular orientation in a cost-effective way

Efficient Near-Infrared Luminescence Based on Double Perovskite Cs₂SnCl₆

Cs2SnCl6 double perovskite has attracted wide attention as a promising optoelectronic material because of its better stability and lower toxicity than its lead counterparts. However, pure Cs2SnCl6 demonstrates quite poor optical properties, which usually calls for active element doping to realize efficient luminescence. Herein, a facile co-precipitation method was used to synthesize Te4+ and Er3+-co-doped Cs2SnCl6 microcrystals. The prepared microcrystals were polyhedral, with a size distribution around 1–3 μm. Highly efficient NIR emissions at 1540 nm and 1562 nm due to Er3+ were achieved in doped Cs2SnCl6 compounds for the first time. Moreover, the visible luminescence lifetimes of Te4+/Er3+-co-doped Cs2SnCl6 decreased with the increase in the Er3+ concentration due to the increasing energy transfer efficiency. The strong and multi-wavelength NIR luminescence of Te4+/Er3+-co-doped Cs2SnCl6 originates from the 4f→4f transition of Er3+, which was sensitized by the spin-orbital allowed 1S0→3P1 transition of Te4+ through a self-trapped exciton (STE) state. The findings suggest that ns2-metal and lanthanide ion co-doping is a promising method to extend the emission range of Cs2SnCl6 materials to the NIR region

A Centrifugal-Force-Driven Nano-Replication Strategy

The replication of nano-patterns is a significant means of nanomanufacturing. However, there is still a dearth of nano-replication methods that meet the requirements of both high precision and low cost. Therefore, a new strategy to achieve the replication of nano-patterns, namely centrifugal-force-driven nano-replication (CFDNR), is proposed here. An easily obtained centrifugal force which is perpendicular to the plane of a nanostructured template is designed as a driving power, to compel the dynamic polymer to fully fill the space of the template; then, the nano-pattern can be replicated on a polymer film. Anodic aluminum oxide (AAO) templates with nanohole periods of ~450 nm and ~100 nm were employed as the original masters to investigate the nano-replication behaviors. The results of morphology measurements demonstrate excellent precision. The size deviations between the nanohole in the template and the nanopillar on the polymer film are less than 4%. Furthermore, a vacuum-assisted CFDNR scheme is proposed to prevent the formation of cavitation on the polymer replica. This work provides new possibilities and choices for facile, inexpensive and high-precision nanomanufacturing

Constructing Co3O4/La2Ti2O7 p-n Heterojunction for the Enhancement of Photocatalytic Hydrogen Evolution

Layered perovskite-type semiconductor La2Ti2O7 has attracted lots of attention in photocatalytic hydrogen evolution, due to the suitable energy band position for water splitting, high specific surface area, and excellent physicochemical stability. However, the narrow light absorption range and the low separation efficiency of photogenerated carriers limit its photocatalytic activity. Herein, plate-like La2Ti2O7 with uniform crystal morphology was synthesized in molten NaCl salt. A p-n heterojunction was then constructed through the in situ hydrothermal growth of p-type Co3O4 nanoparticles on the surface of n-type plate-like La2Ti2O7. The effects of Co3O4 loading on photocatalytic hydrogen evolution performance were investigated in detail. The results demonstrate that composite Co3O4/La2Ti2O7 possesses much better photocatalytic activity than the pure component. The composite photocatalyst with 1 wt% Co3O4 exhibits the highest hydrogen evolution rate of 79.73 μmol·g−1·h−1 and a good cycling stability. The photoelectrochemistry characterizations illustrate that the improvement of photocatalytic activity is mainly attributed to both the enhanced light absorption from the Co3O4 ornament and the rapid separation of photogenerated electron-hole pairs driven by the built-in electric field close to the p-n heterojunction. The results may provide further insights into the design of high-efficiency La2Ti2O7-based heterojunctions for photocatalytic hydrogen evolution

Enhanced Peroxidase-Like Activity of MoS2 Quantum Dots Functionalized g-C3N4 Nanosheets towards Colorimetric Detection of H2O2

MoS2 quantum dots (QDs) functionalized g-C3N4 nanosheets (MoS2@CNNS) were prepared through a protonation-assisted ion exchange method, which were developed as a highly efficient biomimetic catalyst. Structural analysis revealed that uniformly-dispersed MoS2 QDs with controllable size and different loading amount grew in-situ on the surface of CNNS, forming close-contact MoS2@CNNS nanostructures and exhibiting distinct surface properties. Compared to MoS2 QDs and CNNS, the MoS2@CNNS nanocomposites exhibited a more than four times stronger peroxidase-like catalytic activity, which could catalyze the oxidation of 3,3’,5,5’-tetramethylbenzidine (TMB) in the presence of H2O2 to generate a blue oxide. Among the MoS2@CNNS nanocomposites, MoS2@CNNS(30) was verified to present the best intrinsic peroxidase-like performance, which could be attributed to the more negative potential and larger specific surface area. A simple, rapid and ultrasensitive system for colorimetric detection of H2O2 was thus successfully established based on MoS2@CNNS, displaying nice selectivity, reusability, and stability. The detection limit of H2O2 could reach as low as 0.02 μM. Furthermore, the kinetic and active species trapping experiments indicated the peroxidase-like catalytic mechanism of MoS2@CNNS. This work develops a novel, rapid, and ultrasensitive approach for visual assay of H2O2, which has a potential application prospect on clinical diagnosis and biomedical analysis

Facile Synthesis of MoS₂/g‑C₃N₄/GO Ternary Heterojunction with Enhanced Photocatalytic Activity for Water Splitting

On the basis of a simple ion exchange method, a MoS₂/g-C₃N₄/graphene oxide (GO) ternary nanojunction was constructed as an efficient photocatalyst for hydrogen evolution using solar energy. The confinement effect in MoS₂ and g-C₃N₄ quantum dots enhances their water-splitting redox activities. The designed heterostructure featured a band alignment that facilitates the collection of electrons in MoS₂ and holes in g-C₃N₄, effectively suppressing the recombination of photogenerated charge carriers. Furthermore, the GO with high specific surface area serves as an excellent conductive substrate to transport holes speedily. This study thus provides a novel and facile route of establishing efficient composite photocatalyst with multinary components for energy conversion