7,974 research outputs found
Fusion of Urban TanDEM-X raw DEMs using variational models
Recently, a new global Digital Elevation Model (DEM) with pixel spacing of
0.4 arcseconds and relative height accuracy finer than 2m for flat areas
(slopes 20%) was created
through the TanDEM-X mission. One important step of the chain of global DEM
generation is to mosaic and fuse multiple raw DEM tiles to reach the target
height accuracy. Currently, Weighted Averaging (WA) is applied as a fast and
simple method for TanDEM-X raw DEM fusion in which the weights are computed
from height error maps delivered from the Interferometric TanDEM-X Processor
(ITP). However, evaluations show that WA is not the perfect DEM fusion method
for urban areas especially in confrontation with edges such as building
outlines. The main focus of this paper is to investigate more advanced
variational approaches such as TV-L1 and Huber models. Furthermore, we also
assess the performance of variational models for fusing raw DEMs produced from
data takes with different baseline configurations and height of ambiguities.
The results illustrate the high efficiency of variational models for TanDEM-X
raw DEM fusion in comparison to WA. Using variational models could improve the
DEM quality by up to 2m particularly in inner-city subsets.Comment: This is the pre-acceptance version, to read the final version, please
go to IEEE Journal of Selected Topics in Applied Earth Observations and
Remote Sensing on IEEE Xplor
Non-Local Compressive Sensing Based SAR Tomography
Tomographic SAR (TomoSAR) inversion of urban areas is an inherently sparse
reconstruction problem and, hence, can be solved using compressive sensing (CS)
algorithms. This paper proposes solutions for two notorious problems in this
field: 1) TomoSAR requires a high number of data sets, which makes the
technique expensive. However, it can be shown that the number of acquisitions
and the signal-to-noise ratio (SNR) can be traded off against each other,
because it is asymptotically only the product of the number of acquisitions and
SNR that determines the reconstruction quality. We propose to increase SNR by
integrating non-local estimation into the inversion and show that a reasonable
reconstruction of buildings from only seven interferograms is feasible. 2)
CS-based inversion is computationally expensive and therefore barely suitable
for large-scale applications. We introduce a new fast and accurate algorithm
for solving the non-local L1-L2-minimization problem, central to CS-based
reconstruction algorithms. The applicability of the algorithm is demonstrated
using simulated data and TerraSAR-X high-resolution spotlight images over an
area in Munich, Germany.Comment: 10 page
Towards Automatic SAR-Optical Stereogrammetry over Urban Areas using Very High Resolution Imagery
In this paper we discuss the potential and challenges regarding SAR-optical
stereogrammetry for urban areas, using very-high-resolution (VHR) remote
sensing imagery. Since we do this mainly from a geometrical point of view, we
first analyze the height reconstruction accuracy to be expected for different
stereogrammetric configurations. Then, we propose a strategy for simultaneous
tie point matching and 3D reconstruction, which exploits an epipolar-like
search window constraint. To drive the matching and ensure some robustness, we
combine different established handcrafted similarity measures. For the
experiments, we use real test data acquired by the Worldview-2, TerraSAR-X and
MEMPHIS sensors. Our results show that SAR-optical stereogrammetry using VHR
imagery is generally feasible with 3D positioning accuracies in the
meter-domain, although the matching of these strongly hetereogeneous
multi-sensor data remains very challenging. Keywords: Synthetic Aperture Radar
(SAR), optical images, remote sensing, data fusion, stereogrammetr
Fusion of Heterogeneous Earth Observation Data for the Classification of Local Climate Zones
This paper proposes a novel framework for fusing multi-temporal,
multispectral satellite images and OpenStreetMap (OSM) data for the
classification of local climate zones (LCZs). Feature stacking is the most
commonly-used method of data fusion but does not consider the heterogeneity of
multimodal optical images and OSM data, which becomes its main drawback. The
proposed framework processes two data sources separately and then combines them
at the model level through two fusion models (the landuse fusion model and
building fusion model), which aim to fuse optical images with landuse and
buildings layers of OSM data, respectively. In addition, a new approach to
detecting building incompleteness of OSM data is proposed. The proposed
framework was trained and tested using data from the 2017 IEEE GRSS Data Fusion
Contest, and further validated on one additional test set containing test
samples which are manually labeled in Munich and New York. Experimental results
have indicated that compared to the feature stacking-based baseline framework
the proposed framework is effective in fusing optical images with OSM data for
the classification of LCZs with high generalization capability on a large
scale. The classification accuracy of the proposed framework outperforms the
baseline framework by more than 6% and 2%, while testing on the test set of
2017 IEEE GRSS Data Fusion Contest and the additional test set, respectively.
In addition, the proposed framework is less sensitive to spectral diversities
of optical satellite images and thus achieves more stable classification
performance than state-of-the art frameworks.Comment: accepted by TGR
Building Footprint Generation Using Improved Generative Adversarial Networks
Building footprint information is an essential ingredient for 3-D
reconstruction of urban models. The automatic generation of building footprints
from satellite images presents a considerable challenge due to the complexity
of building shapes. In this work, we have proposed improved generative
adversarial networks (GANs) for the automatic generation of building footprints
from satellite images. We used a conditional GAN with a cost function derived
from the Wasserstein distance and added a gradient penalty term. The achieved
results indicated that the proposed method can significantly improve the
quality of building footprint generation compared to conditional generative
adversarial networks, the U-Net, and other networks. In addition, our method
nearly removes all hyperparameters tuning.Comment: 5 page
Learning Spectral-Spatial-Temporal Features via a Recurrent Convolutional Neural Network for Change Detection in Multispectral Imagery
Change detection is one of the central problems in earth observation and was
extensively investigated over recent decades. In this paper, we propose a novel
recurrent convolutional neural network (ReCNN) architecture, which is trained
to learn a joint spectral-spatial-temporal feature representation in a unified
framework for change detection in multispectral images. To this end, we bring
together a convolutional neural network (CNN) and a recurrent neural network
(RNN) into one end-to-end network. The former is able to generate rich
spectral-spatial feature representations, while the latter effectively analyzes
temporal dependency in bi-temporal images. In comparison with previous
approaches to change detection, the proposed network architecture possesses
three distinctive properties: 1) It is end-to-end trainable, in contrast to
most existing methods whose components are separately trained or computed; 2)
it naturally harnesses spatial information that has been proven to be
beneficial to change detection task; 3) it is capable of adaptively learning
the temporal dependency between multitemporal images, unlike most of algorithms
that use fairly simple operation like image differencing or stacking. As far as
we know, this is the first time that a recurrent convolutional network
architecture has been proposed for multitemporal remote sensing image analysis.
The proposed network is validated on real multispectral data sets. Both visual
and quantitative analysis of experimental results demonstrates competitive
performance in the proposed mode
A Framework for SAR-Optical Stereogrammetry over Urban Areas
Currently, numerous remote sensing satellites provide a huge volume of
diverse earth observation data. As these data show different features regarding
resolution, accuracy, coverage, and spectral imaging ability, fusion techniques
are required to integrate the different properties of each sensor and produce
useful information. For example, synthetic aperture radar (SAR) data can be
fused with optical imagery to produce 3D information using stereogrammetric
methods. The main focus of this study is to investigate the possibility of
applying a stereogrammetry pipeline to very-high-resolution (VHR) SAR-optical
image pairs. For this purpose, the applicability of semi-global matching is
investigated in this unconventional multi-sensor setting. To support the image
matching by reducing the search space and accelerating the identification of
correct, reliable matches, the possibility of establishing an epipolarity
constraint for VHR SAR-optical image pairs is investigated as well. In
addition, it is shown that the absolute geolocation accuracy of VHR optical
imagery with respect to VHR SAR imagery such as provided by TerraSAR-X can be
improved by a multi-sensor block adjustment formulation based on rational
polynomial coefficients. Finally, the feasibility of generating point clouds
with a median accuracy of about 2m is demonstrated and confirms the potential
of 3D reconstruction from SAR-optical image pairs over urban areas.Comment: This is the pre-acceptance version, to read the final version, please
go to ISPRS Journal of Photogrammetry and Remote Sensing on ScienceDirec
A fast and accurate basis pursuit denoising algorithm with application to super-resolving tomographic SAR
regularization is used for finding sparse solutions to an
underdetermined linear system. As sparse signals are widely expected in remote
sensing, this type of regularization scheme and its extensions have been widely
employed in many remote sensing problems, such as image fusion, target
detection, image super-resolution, and others and have led to promising
results. However, solving such sparse reconstruction problems is
computationally expensive and has limitations in its practical use. In this
paper, we proposed a novel efficient algorithm for solving the complex-valued
regularized least squares problem. Taking the high-dimensional
tomographic synthetic aperture radar (TomoSAR) as a practical example, we
carried out extensive experiments, both with simulation data and real data, to
demonstrate that the proposed approach can retain the accuracy of second order
methods while dramatically speeding up the processing by one or two orders.
Although we have chosen TomoSAR as the example, the proposed method can be
generally applied to any spectral estimation problems.Comment: 11 pages, IEEE Transactions on Geoscience and Remote Sensin
- …