Temperatures of Exploding Nuclei

Breakup temperatures in central collisions of 197Au + 197Au at bombarding energies E/A = 50 to 200 MeV were determined with two methods. Isotope temperatures, deduced from double ratios of hydrogen, helium, and lithium isotopic yields, increase monotonically with bombarding energy from 5 MeV to 12 MeV, in qualitative agreement with a scenario of chemical freeze-out after adiabatic expansion. Excited-state temperatures, derived from yield ratios of states in 4He, 5Li, 6Li, and 8Be, are about 5 MeV, independent of the projectile energy, and seem to reflect the internal temperature of fragments at their final separation from the system. PACS numbers: 25.70.Mn, 25.70.Pq, 25.75.-qComment: 10 pages, RevTeX with 4 included figures; Also available from http://www-kp3.gsi.de/www/kp3/aladin_publications.htm

Microcanonical studies concerning the recent experimental evaluations of the nuclear caloric curve

The microcanonical multifragmentation model from [Al. H. Raduta and Ad. R. Raduta, Phys. Rev. C 55, 1344 (1997); 56, 2059 (1997); 59, 323 (1999)] is refined and improved by taking into account the experimental discrete levels for fragments with $A \le 6$ and by including the stage of sequential decay of the primary excited fragments. The caloric curve is reevaluated and the heat capacity at constant volume curve is represented as a function of excitation energy and temperature. The sequence of equilibrated sources formed in the reactions studied by the ALADIN group ($^{197}$Au+$^{197}$Au at 600, 800 and 1000 MeV/nucleon bombarding energy) is deduced by fitting simultaneously the model predicted mean multiplicity of intermediate mass fragments ($M_{IMF}$) and charge asymmetry of the two largest fragments ($a_{12}$) versus bound charge ($Z_{bound}$) on the corresponding experimental data. Calculated HeLi isotopic temperature curves as a function of the bound charge are compared with the experimentally deduced ones.Comment: 13 pages, 4 figure

Time Scales in Spectator Fragmentation

Proton-proton correlations and correlations of p-alpha, d-alpha, and t-alpha from spectator decays following Au + Au collisions at 1000 AMeV have been measured with an highly efficient detector hodoscope. The constructed correlation functions indicate a moderate expansion and low breakup densities similar to assumptions made in statistical multifragmentation models. In agreement with a volume breakup rather short time scales were deduced employing directional cuts in proton-proton correlations. PACS numbers: 25.70.Pq, 21.65.+f, 25.70.MnComment: 8 pages, with 5 included figures; To appear in the proceedings of the CRIS 2000 conference; Also available from http://www-kp3.gsi.de/www/kp3/aladin_publications.htm

Breakup Density in Spectator Fragmentation

Proton-proton correlations and correlations of protons, deuterons and tritons with alpha particles from spectator decays following 197Au + 197Au collisions at 1000 MeV per nucleon have been measured with two highly efficient detector hodoscopes. The constructed correlation functions, interpreted within the approximation of a simultaneous volume decay, indicate a moderate expansion and low breakup densities, similar to assumptions made in statistical multifragmentation models. PACS numbers: 25.70.Pq, 21.65.+f, 25.70.Mn, 25.75.GzComment: 11 pages, LaTeX with 3 included figures; Also available from http://www-kp3.gsi.de/www/kp3/aladin_publications.htm

Thermal and Chemical Freeze-out in Spectator Fragmentation

Isotope temperatures from double ratios of hydrogen, helium, lithium, beryllium, and carbon isotopic yields, and excited-state temperatures from yield ratios of particle-unstable resonances in 4He, 5Li, and 8Be, were determined for spectator fragmentation, following collisions of 197Au with targets ranging from C to Au at incident energies of 600 and 1000 MeV per nucleon. A deviation of the isotopic from the excited-state temperatures is observed which coincides with the transition from residue formation to multi-fragment production, suggesting a chemical freeze-out prior to thermal freeze-out in bulk disintegrations.Comment: 14 pages, 10 figures, submitted to Phys. Rev. C, small changes as suggested by the editors and referee

Breakup Temperature of Target Spectators in Au + Au Collisions at E/A = 1000 MeV

Breakup temperatures were deduced from double ratios of isotope yields for target spectators produced in the reaction Au + Au at 1000 MeV per nucleon. Pairs of $^{3,4}$He and $^{6,7}$Li isotopes and pairs of $^{3,4}$He and H isotopes (p, d and d, t) yield consistent temperatures after feeding corrections, based on the quantum statistical model, are applied. The temperatures rise with decreasing impact parameter from 4 MeV for peripheral to about 10 MeV for the most central collisions. The good agreement with the breakup temperatures measured previously for projectile spectators at an incident energy of 600 MeV per nucleon confirms the observed universality of the spectator decay at relativistic bombarding energies. The measured temperatures also agree with the breakup temperatures predicted by the statistical multifragmentation model. For these calculations a relation between the initial excitation energy and mass was derived which gives good simultaneous agreement for the fragment charge correlations. The energy spectra of light charged particles, measured at $\theta_{lab}$ = 150$^{\circ}$, exhibit Maxwellian shapes with inverse slope parameters much higher than the breakup temperatures. The statistical multifragmentation model, because Coulomb repulsion and sequential decay processes are included, yields light-particle spectra with inverse slope parameters higher than the breakup temperatures but considerably below the measured values. The systematic behavior of the differences suggests that they are caused by light-charged-particle emission prior to the final breakup stage. PACS numbers: 25.70.Mn, 25.70.Pq, 25.75.-qComment: 29 pages, TeX with 11 included figures; Revised version accepted for publication in Z. Phys. A Two additional figure

Temperature measurement of fragment emitting systems in Au+Au 35 MeV/nucleon collisions

We report on the results of experiments performed to investigate the Au1Au 35 MeV/nucleon reaction. The reaction products generated in the disassembly of the unique source formed in central collisions and those coming from the decay of the quasiprojectile in peripheral and midperipheral ones ~five different impact parameters! were identified through a careful data selection based on the study of energy and angular distributions. The excitation energies of the fragment sources have been extracted through a calorimetric method and by means of a comparison with model calculations. The nuclear temperatures of these decaying systems have been measured from the relative isotopic abundances and, also for central collisions, from the relative populations of excited states. The temperatures of the quasiprojectile disassembling systems are slowly increasing going towards smaller impact parameter. The relationship between temperature and excitation energy seems to be almost independent of the characteristics of the emitting source. The extracted caloric curve shows a slow monotonic increase with increasing excitation energy. A comparison with data derived from Au fragmentation at much higher incident energies is discussed. @S0556-2813~98!04408-2

Research into Carbon Dioxide Curing’s Effects on the Properties of Reactive Powder Concrete with Assembly Unit of Sulphoaluminate Cement and Ordinary Portland Cement

Excessive emissions of carbon dioxide can lead to greenhouse effect thus destroying the ecological balance. Therefore, effective measures need to be taken to reduce the emission of carbon dioxide. In this study, the influence of carbon dioxide curing on the mechanical strength and NaCl freeze-thaw deterioration of reactive powder concrete (RPC) with the assembly unit of sulphoaluminate cement and ordinary Portland cement was investigated. The ratio of sulphoaluminate cement ranged from 0% to 100% by the total mass of cement with the curing age ranging from 1 d to 28 d. The mechanical strength of RPC with 50% ordinary Portland cement and 50% sulphoaluminate cement containing the polypropylene fibers ranging from 1% to 4% by volume of RPC were investigated. Moreover, the following mass and mechanical strength loss rates, the carbonation depth, the chloride ion migration coefficient and the relative dynamic elastic modulus (RDEM) during NaCl freeze-thaw cycles were determined. Finally, the scanning electron microscope (SEM) and X-ray diffraction were applied in investigating the carbonation process of RPC. Results showed that the addition of sulphoaluminate cement could improve the mechanical strength of RPC at low curing age (lower than 7 d). However, when the cuing age reached 7 d, the sulphoaluminate cement demonstrated negative effect on the mechanical strength. Moreover, the carbon dioxide curing led to increases in the mechanical strength and when ordinary Portland cement was added the enhancing effect was more obvious. Furthermore, the carbon dioxide curing could effectively improve the resistance of NaCl freeze-thaw cycles and increase the carbonation depth. Finally, the increasing dosages of polypropylene fibers were advantageous to the mechanical strength and the resistance of NaCl freeze-thaw cycles. From the researching results of the microscopic performance, the carbon dioxide curing could improve the compactness of hydration products and reduce the content of calcium hydroxide especially at the curing age of 3 days

Preparation and Properties of Poly(vinyl acetate) Adhesive Modified with Vinyl Versatate

A series of vinyl versatate (VV10) modified poly(vinyl acetate) adhesive (HVPVAc) were prepared using soap-free emulsion polymerization. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy was used to characterize the structure of the modified poly(vinyl acetate) latex. The effect of the VV10 content on particle size, viscosity, mechanical properties, and T-peel strength of the modified poly(vinyl acetate) was determined. No absorption peak at 1675–1500 cm−1 in the ATR-FTIR spectrum was observed as a result of the carbon-carbon double bond reacting completely. With the occurrence of -C-O-C and the disappearance of the carbon-carbon double bond in the FTIR spectrum, a more complex structure formed. The structure improves the mechanical properties. Increasing the VV10 content resulted in an increase in particle size from 63 nm to 221 nm, a steady increase in the viscosity of the HVPVAc latex, an increase in tensile strength from 7 MPa to 13.4 MPa, and a decrease in breaking elongation from 1310% to 1004%. As the VV10 content increased from 0 to 30% by weight, the T-peel strength of the HVPVAc adhesive increased from 8.35 N/mm to 18.97 N/mm, indicating improved adhesive performance