Dynamic membrane bioreactor performance enhancement by powdered activated carbon addition: Evaluation of sludge morphological, aggregative and microbial properties

© 2018 The effects of powdered activated carbon (PAC) addition on sludge morphological, aggregative and microbial properties in a dynamic membrane bioreactor (DMBR) were investigated to explore the enhancement mechanism of pollutants removal and filtration performance. Sludge properties were analyzed through various analytical measurements. The results showed that the improved sludge aggregation ability and the evolution of microbial communities affected sludge morphology in PAC-DMBR, as evidenced by the formation of large, regularly shaped and strengthened sludge flocs. The modifications of sludge characteristics promoted the formation process and filtration flux of the dynamic membrane (DM) layer. Additionally, PAC addition did not exert very significant influence on the propagation of eukaryotes (protists and metazoans) and microbial metabolic activity. High-throughput pyrosequencing results indicated that adding PAC improved the bacterial diversity in activated sludge, as PAC addition brought about additional microenvironment in the form of biological PAC (BPAC), which promoted the enrichment of Acinetobacter (13.9%), Comamonas (2.9%), Flavobacterium (0.31%) and Pseudomonas (0.62%), all contributing to sludge flocs formation and several (such as Acinetobacter) capable of biodegrading relatively complex organics. Therefore, PAC addition could favorably modify sludge properties from various aspects and thus enhance the DMBR performance

Characterization of a hybrid powdered activated carbon-dynamic membrane bioreactor (PAC-DMBR) process with high flux by gravity flow: Operational performance and sludge properties

© 2016 Elsevier Ltd Three PAC-DMBRs were developed for wastewater treatment under different PAC dosages with biomass concentrations averaged at 2.5, 3.5 and 5.0 g/L. The DMBRs could be continuously operated at 40–100 L/m2 h, while higher fluxes were obtained within the PAC-DMBRs with hydraulic retention times varying in 4–10 h. A dose of 1 g/L PAC brought about obvious improvement in the sludge particle size distribution, settling, flocculating and dewatering properties due to the formation of biological PAC, and the sludge properties were further improved at a higher PAC dose (3 g/L). The addition of PAC notably shortened the DM formation time after air backwashing and enhanced pollutant removal. Moreover, under a long solid retention time (approximately 150 d), the concentrations of both soluble and bound extracellular polymeric substances (EPS) decreased substantially because of the adsorption and biodegradation effects of the biological PAC. No obvious impact on biomass activity was observed with PAC addition

Effects of powdered activated carbon addition on filtration performance and dynamic membrane layer properties in a hybrid DMBR process

© 2017 Elsevier B.V. A powdered activated carbon-dynamic membrane bioreactor (PAC-DMBR) was developed and used to treat domestic wastewater by dosing with 3 g/L PAC. The experimental results were compared with those of a control DMBR to investigate the filtration performance and various properties of the dynamic membrane (DM) layer. One flat-sheet DM module made of nylon mesh (pore size 75 μm) was used for effluent production at a high stable flux (50–100 L/m2 h) under a 10 cm water head by gravity flow, resulting in continuous operation cycles of 60–120 h. During the operation period, the PAC-DMBR showed enhanced removal efficiency of pollutants, higher stable membrane flux (10 L/m2 h more), lower filtration resistance (6.0–8.0 × 1010 m−1), quicker formation of the DM layer (within 5 min), and better DM layer regeneration after air backwashing. The DM layer in the PAC-DMBR showed a more porous and incompressible structure, because less extracellular polymeric substance and a portion of the biological PAC were incorporated into the DM layer formed as verified by the analytical results. Using high-throughput pyrosequencing technology, it was revealed that at the genus level the diversity of bacterial communities increased from 18 to 23 genera, while several genera that were favored in the PAC-assisted environment or were responsible for degrading complex organics were enriched. Moreover, the abundance of phylum Proteobacteria, which served as pioneer surface colonizers, was reduced in the PAC-DMBR. It was concluded that PAC addition could modify various aspects of the activated sludge and the DM layer properties, which affected the filtration behavior of the DM layer in the PAC-DMBR

New insight into fouling behavior and foulants accumulation property of cake sludge in a full-scale membrane bioreactor

© 2016 Elsevier B.V.. Cake sludge attached on membrane surfaces was collected and characterized in a full scale membrane bioreactor (MBR) compared with bulk sludge. The morphological, chemical and microbial properties were examined through microscopic observations, particle size distribution (PSD) analysis, chemical analysis, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and energy-diffusive X-ray (EDX) analysis, specific oxygen utilization rate (SOUR) measurements and Biolog assay. The results showed that fiber-like substances might have served as the skeleton of larger size aggregates in cake sludge. Moreover, much more polysaccharides and inorganic elements such as multivalent cations were accumulated in cake sludge than proteins and humics. Cake sludge showed lower microbial activity for aerobic degradation than bulk sludge, but higher metabolic activity for the degradation of refractory substances (aromatic proteins and humics) other than polysaccharides. Based on batch filtration experiments, it was found that cake sludge had much higher cake layer fouling potential but lower membrane pore blocking resistance, probably due to the heterogeneous structure of cake sludge resulting from accumulation and interaction of various inorganic and organic foulants. This investigation could assist in obtaining a better understanding of the fouling behavior and foulants accumulation properties of cake sludge in the full-scale MBRs

A pilot controlled trial of a combination of dense cranial electroacupuncture stimulation and body acupuncture for post-stroke depression

Our previous studies have demonstrated the treatment benefits of dense cranial electroacupuncture stimulation (DCEAS), a novel brain stimulation therapy in patients with major depression, postpartum depression and obsessive-compulsive disorder. The purpose of the present study was to further evaluate the effectiveness of DCEAS combined with body acupuncture and selective serotonin reuptake inhibitors (SSRIs) in patients with post-stroke depression (PSD).published_or_final_versio

In Situ Synthesis of Reduced Graphene Oxide and Gold Nanocomposites for Nanoelectronics and Biosensing

In this study, an in situ chemical synthesis approach has been developed to prepare graphene–Au nanocomposites from chemically reduced graphene oxide (rGO) in aqueous media. UV–Vis absorption, atomic force microscopy, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy were used to demonstrate the successful attachment of Au nanoparticles to graphene sheets. Configured as field-effect transistors (FETs), the as-synthesized single-layered rGO-Au nanocomposites exhibit higher hole mobility and conductance when compared to the rGO sheets, promising its applications in nanoelectronics. Furthermore, we demonstrate that the rGO-Au FETs are able to label-freely detect DNA hybridization with high sensitivity, indicating its potentials in nanoelectronic biosensing

Ultrathin 2 nm gold as ideal impedance-matched absorber for infrared light

Thermal detectors are a cornerstone of infrared (IR) and terahertz (THz) technology due to their broad spectral range. These detectors call for suitable broad spectral absorbers with minimalthermal mass. Often this is realized by plasmonic absorbers, which ensure a high absorptivity butonly for a narrow spectral band. Alternativly, a common approach is based on impedance-matching the sheet resistance of a thin metallic film to half the free-space impedance. Thereby, it is possible to achieve a wavelength-independent absorptivity of up to 50 %, depending on the dielectric properties of the underlying substrate. However, existing absorber films typicallyrequire a thickness of the order of tens of nanometers, such as titanium nitride (14 nm), whichcan significantly deteriorate the response of a thermal transducers. Here, we present the application of ultrathin gold (2 nm) on top of a 1.2 nm copper oxide seed layer as an effective IR absorber. An almost wavelength-independent and long-time stable absorptivity of 47(3) %, ranging from 2 $\mu$m to 20 $\mu$m, could be obtained and is further discussed. The presented gold thin-film represents analmost ideal impedance-matched IR absorber that allows a significant improvement of state-of-the-art thermal detector technology

Role of Temperature in the Growth of Silver Nanoparticles Through a Synergetic Reduction Approach

This study presents the role of reaction temperature in the formation and growth of silver nanoparticles through a synergetic reduction approach using two or three reducing agents simultaneously. By this approach, the shape-/size-controlled silver nanoparticles (plates and spheres) can be generated under mild conditions. It was found that the reaction temperature could play a key role in particle growth and shape/size control, especially for silver nanoplates. These nanoplates could exhibit an intensive surface plasmon resonance in the wavelength range of 700–1,400 nm in the UV–vis spectrum depending upon their shapes and sizes, which make them useful for optical applications, such as optical probes, ionic sensing, and biochemical sensors. A detailed analysis conducted in this study clearly shows that the reaction temperature can greatly influence reaction rate, and hence the particle characteristics. The findings would be useful for optimization of experimental parameters for shape-controlled synthesis of other metallic nanoparticles (e.g., Au, Cu, Pt, and Pd) with desirable functional properties

Architecture of Pol II(G) and molecular mechanism of transcription regulation by Gdown1.

Tight binding of Gdown1 represses RNA polymerase II (Pol II) function in a manner that is reversed by Mediator, but the structural basis of these processes is unclear. Although Gdown1 is intrinsically disordered, its Pol II interacting domains were localized and shown to occlude transcription factor IIF (TFIIF) and transcription factor IIB (TFIIB) binding by perfect positioning on their Pol II interaction sites. Robust binding of Gdown1 to Pol II is established by cooperative interactions of a strong Pol II binding region and two weaker binding modulatory regions, thus providing a mechanism both for tight Pol II binding and transcription inhibition and for its reversal. In support of a physiological function for Gdown1 in transcription repression, Gdown1 co-localizes with Pol II in transcriptionally silent nuclei of early Drosophila embryos but re-localizes to the cytoplasm during zygotic genome activation. Our study reveals a self-inactivation through Gdown1 binding as a unique mode of repression in Pol II function