On the sample size dependence of the critical current density in MgB2_2 superconductors

Sample size dependent critical current density has been observed in magnesium diboride superconductors. At high fields, larger samples provide higher critical current densities, while at low fields, larger samples give rise to lower critical current densities. The explanation for this surprising result is proposed in this study based on the electric field generated in the superconductors. The dependence of the current density on the sample size has been derived as a power law $j\propto R^{1/n}$ ($n$ is the $n$ factor characterizing $E-j$ curve $E=E_c(j/j_c)^n$). This dependence provides one with a new method to derive the $n$ factor and can also be used to determine the dependence of the activation energy on the current density.Comment: Revtex, 4 pages, 5 figure

Comparing the immune responses of two genetically B-complex disparate Fayoumi chicken lines to Eimeria tenella

The present study was conducted to compare the susceptibility of congenic Fayoumi lines to Eimeria tenella infection and to assess genetic differences in Eimeria egression. Chickens were orally inoculated with 5 × 104 sporulated E. tenella oocysts and challenged with 5 × 106 oocysts on the 10th day after the primary infection. The Fayoumi M5.1 line exhibited higher levels of body weight gain, less oocyst shedding and higher percentages of B and CD4+/CD8+ T cells than the M15.2 chickens. These results demonstrate that M5.1 line is more resistant to E. tenella infection than M15.2 line. Furthermore, the percentage of sporozoite egress from peripheral blood mononuclear cells (PBMCs) was higher in the M5.1 line. The results of this study suggest that enhanced resistance of Fayoumi M5.1 to E. tenella infection may involve heightened cell-mediated and adaptive immunity, resulting in reduced intracellular development of Eimeria parasites

Direct observation of active material concentration gradients and crystallinity breakdown in LiFePO4 electrodes during charge/discharge cycling of lithium batteries

The phase changes that occur during discharge of an electrode comprised of LiFePO4, carbon, and PTFE binder have been studied in lithium half cells by using X-ray diffraction measurements in reflection geometry. Differences in the state of charge between the front and the back of LiFePO4 electrodes have been visualized. By modifying the X-ray incident angle the depth of penetration of the X-ray beam into the electrode was altered, allowing for the examination of any concentration gradients that were present within the electrode. At high rates of discharge the electrode side facing the current collector underwent limited lithium insertion while the electrode as a whole underwent greater than 50% of discharge. This behavior is consistent with depletion at high rate of the lithium content of the electrolyte contained in the electrode pores. Increases in the diffraction peak widths indicated a breakdown of crystallinity within the active material during cycling even during the relatively short duration of these experiments, which can also be linked to cycling at high rate

Micro-Tapered Fiber Few-Mode Interferometers Incorporated by Molecule Self-Assembly Fiber Grating for Temperature Sensing Applications

We demonstrate fiber few-mode interferometers based on a self-assembly surface corrugated grating using charged nano-particles. Initially, an abrupt taper (AT) was first created using a micro flame. The AT was then further outwardly stretched to make an elongated uniformed taper until the tapered diameter achieved a micron scale. The high order core modes (HOCMs) were excited at the AT and the optical path difference (OPD) among the modes was enlarged through the uniformed taper to achieve the few-mode interference effects seen. However, to significantly enhance the interference effects with higher extinction ratios (ER) over such a short length of interferometer, an external assisted grating was made using charged nanoparticles to form surface corrugated grating with a period, Λ, of approximately 14 μm. This intermediate period of the fiber grating was helpful in scattering and attenuating some unwanted high-order modes to change the optical characteristics of the few-mode interferometer (FMI). This FMI with a self-assembly fiber grating (SAFG) was further used to make fiber temperature sensors, with a maximum resonant wavelength shift of 4.6 nm, over a temperature range from 20–60 °C. The temperature sensitivity achieved was 112.6 pm/°C and the coefficient of determination, R2, was as high as 0.99, which revealed the high linearity of the results

Multifilamentary, in-situ Route, Cu-stabilized MgB2 Strands

Transport critical current densities and n-values were measured at 4.2 K in fields up to 15 T on 7, 19, and 37-stack multifilamentary MgB2 strands made using an in-situ route. Some strands included SiC additions (particle size 30 nm), while in others Mg-rich compositions were used. Two basic multifilamentary variants were measured, the first had Nb filamentary barriers, the second had Fe filamentary barriers. All samples incorporated stabilizer in the form of Cu 101. Simple, one-step heat treatments were used, with temperatures ranging from 700-800C, and times from 10-30 minutes. Transport critical current densities of 1.75 x 105 A/cm2 were seen at 4.2 K and 5 T in 37 stack strands.Comment: 10 pages, 3 figs, 2 table

Thermal plasma synthesis of Li2S nanoparticles for application in lithium-sulfur batteries

Abstract : Inductively-coupled thermal plasma processes were used to produce nanosized Li2S. Prior to the syntheses, the feasibility of forming Li2S was first evaluated using FactSage by considering the phase diagrams of sulfur and different lithium precursors in reducing atmospheres; Li2O, LiOH·H2O, Li2CO3 and Li2SO4·H2O all showed promises in producing Li2S nanoparticles, as confirmed by experiments. Argon and hydrogen mixtures were used as plasma gases, and a carbothermal reduction was implemented for Li2SO4·H2O. In addition, carbon-coated Li2S nanoparticles were synthesized with downstream injection of methane. Carbon was shown to stabilize Li2S upon contact with ambient air. The Li2S nanoparticles were electrochemically tested in half-cells using electrolytes containing LiNO3 or Li2S6 as additives. It was found that adding LiNO3 to the electrolyte was detrimental to the electrochemical performance of Li2S, whereas the combination of Li2S6 and LiNO3 as additives doubled the charge and discharge capacities of the half-cell over 10 cycles