215 research outputs found
Insights from ARPES for an undoped, four-layered, two-gap high-T_c superconductor
An undoped cuprate with apical fluorine and inner (i) and outer (o)
CuO2-layers is a 60 K superconductor whose Fermi surface (FS) has large n- and
p-doped sheets with the SC gap on the n-sheet twice that on the p -sheet (Y.
Chen et al.). The Fermi surface is not reproduced by the LDA, but the screening
must be substantially reduced due to electronic correlations, and oxygen in the
o-layers must be allowed to dimple outwards. This charges the i-layers by
0.01|e|, causes an 0.4 eV Madelung-potential difference between the i and o
-layers, quenches the i-o hopping, and localizes the n-sheets onto the
i-layers, thus protecting their d-wave pairs from being broken by scattering on
impurities in the BaF layers. The correlation-reduced screening strengthens the
coupling to z-axis phonons.Comment: 4 pages, 3 figure
Bulk Fermi surface coexistence with Dirac surface state in BiSe: a comparison of photoemission and Shubnikov-de Haas measurements
Shubnikov de Haas (SdH) oscillations and Angle Resolved PhotoEmission
Spectroscopy (ARPES) are used to probe the Fermi surface of single crystals of
Bi2Se3. We find that SdH and ARPES probes quantitatively agree on measurements
of the effective mass and bulk band dispersion. In high carrier density
samples, the two probes also agree in the exact position of the Fermi level EF,
but for lower carrier density samples discrepancies emerge in the position of
EF. In particular, SdH reveals a bulk three-dimensional Fermi surface for
samples with carrier densities as low as 10^17cm-3. We suggest a simple
mechanism to explain these differences and discuss consequences for existing
and future transport studies of topological insulators.Comment: 5 mages, 5 figure
The inverse along a product and its applications
In this paper, we study the recently defined notion of the inverse along an element. An existence criterion for the inverse along
a product is given in a ring. As applications, we present the equivalent conditions for the existence and expressions of the inverse along a matrix.The authors are highly grateful to the referee for valuable comments which
led to improvements of the paper. In particular, Remarks 3.2 and 3.4 were
suggested to the authors by the referee. The first author is grateful to China
Scholarship Council for supporting him to purse his further study in University
of Minho, Portugal. Pedro Patr´ıcio and Yulin Zhang were financed
by the Research Centre of Mathematics of the University of Minho with
the Portuguese Funds from the “Funda¸c˜ao para a Ciˆencia e a Tecnologia”,
through the Project PEst-OE/MAT/UI0013/2014. Jianlong Chen and Huihui
Zhu were supported by the National Natural Science Foundation of China
(No. 11201063 and No. 11371089), the Specialized Research Fund for the
Doctoral Program of Higher Education (No. 20120092110020), the Natural
Science Foundation of Jiangsu Province (No. BK20141327), the Foundation
of Graduate Innovation Program of Jiangsu Province(No. CXLX13-072),
the Scientific Research Foundation of Graduate School of Southeast University
and the Fundamental Research Funds for the Central Universities (No.
22420135011)
Ambipolar Field Effect in Topological Insulator Nanoplates of (BixSb1-x)2Te3
Topological insulators represent a new state of quantum matter attractive to
both fundamental physics and technological applications such as spintronics and
quantum information processing. In a topological insulator, the bulk energy gap
is traversed by spin-momentum locked surface states forming an odd number of
surface bands that possesses unique electronic properties. However, transport
measurements have often been dominated by residual bulk carriers from crystal
defects or environmental doping which mask the topological surface
contribution. Here we demonstrate (BixSb1-x)2Te3 as a tunable topological
insulator system to manipulate bulk conductivity by varying the Bi/Sb
composition ratio. (BixSb1-x)2Te3 ternary compounds are confirmed as
topological insulators for the entire composition range by angle resolved
photoemission spectroscopy (ARPES) measurements and ab initio calculations.
Additionally, we observe a clear ambipolar gating effect similar to that
observed in graphene using nanoplates of (BixSb1-x)2Te3 in
field-effect-transistor (FET) devices. The manipulation of carrier type and
concentration in topological insulator nanostructures demonstrated in this
study paves the way for implementation of topological insulators in
nanoelectronics and spintronics.Comment: 7 pages, 4 figure
Novel Use of Matched Filtering for Synaptic Event Detection and Extraction
Efficient and dependable methods for detection and measurement of synaptic events are important for studies of synaptic physiology and neuronal circuit connectivity. As the published methods with detection algorithms based upon amplitude thresholding and fixed or scaled template comparisons are of limited utility for detection of signals with variable amplitudes and superimposed events that have complex waveforms, previous techniques are not applicable for detection of evoked synaptic events in photostimulation and other similar experimental situations. Here we report on a novel technique that combines the design of a bank of approximate matched filters with the detection and estimation theory to automatically detect and extract photostimluation-evoked excitatory postsynaptic currents (EPSCs) from individually recorded neurons in cortical circuit mapping experiments. The sensitivity and specificity of the method were evaluated on both simulated and experimental data, with its performance comparable to that of visual event detection performed by human operators. This new technique was applied to quantify and compare the EPSCs obtained from excitatory pyramidal cells and fast-spiking interneurons. In addition, our technique has been further applied to the detection and analysis of inhibitory postsynaptic current (IPSC) responses. Given the general purpose of our matched filtering and signal recognition algorithms, we expect that our technique can be appropriately modified and applied to detect and extract other types of electrophysiological and optical imaging signals
Improvement of characterization accuracy of the nonlinear photonic crystals using finite elements-iterative method
We investigate nonlinear one- and two-dimensional photonic crystals by
applying a finite element-iterative method.Numerical results show the essential
influence of nonlinear elements embedded into a quarter-wave stack and the
sharp photonic crystal waveguide bend on the spectral characteristics of these
structures. We compare our results with those obtained in [21] from the
discrete equation method for the case of a sharp waveguide bend. The comparison
shows that neglecting the nonuniform field distribution inside the embedded
nonlinear elements leads to overestimation of the waveguide bend
transmissivity.Comment: 5 pages, 9 figure
Unusual Layer-Dependent Charge Distribution, Collective Mode Coupling, and Superconductivity in Multilayer Cuprate Ba2Ca3Cu4O8F2
Low energy ultrahigh momentum resolution angle resolved photoemission spectroscopy study on four-layer self-doped high T-c superconductor Ba2Ca3Cu4O8F2 (F0234) revealed fine structure in the band dispersion, identifying the unconventional association of hole and electron doping with the inner and outer CuO2 layers, respectively. For the states originating from two inequivalent CuO2 layers, different energy scales are observed in dispersion kinks associated with the collective mode coupling, with the larger energy scale found in the electron (n-) doped state which also has stronger coupling strength. Given the earlier finding that the superconducting gap is substantially larger along the n-type Fermi surface, our observations connect the mode coupling energy and strength with magnitude of the pairing gap
Distribution of HLA-A, -B and -DRB1 Genes and Haplotypes in the Tujia Population Living in the Wufeng Region of Hubei Province, China
BACKGROUND: The distribution of HLA alleles and haplotypes varies widely between different ethnic populations and geographic areas. Before any genetic marker can be used in a disease-associated study it is therefore essential to investigate allelic frequencies and establish a genetic database. METHODOLOGY/PRINCIPAL FINDINGS: This is the first report of HLA typing in the Tujia group using the Luminex HLA-SSO method HLA-A, -B and -DRB1 allelic distributions were determined in 124 unrelated healthy Tujia individuals, and haplotypic frequencies and linkage disequilibrium parameters were estimated using the maximum-likelihood method. In total 10 alleles were detected at the HLA-A locus, 21 alleles at the HLA-B locus and 14 alleles at the HLA-DRB1 locus. The most frequently observed alleles in the HLA-I group were HLA-A*02 (35.48%), A*11 (28.23%), A*24 (15.73%); HLA-B*40 (25.00%), B*46 (16.13%), and B*15 (15.73%). Among HLA-DRB1 alleles, high frequencies of HLA-DRB1*09 (25.81%) were observed, followed by HLA-DRB1*15 (12.9%), and DRB1*12 (10.89%). The two-locus haplotypes at the highest frequency were A*02-B*46A (8.47%), followed by A*11-B*40 (7.66%), A*02-B*40 (8.87%), A*11-B*15 (6.45%), A*02-B*15 (6.05%), B*40-DRB1*09 (9.27%) and B*46-DRB1*09 (6.45%). The most common three-locus haplotypes found in the Tujia population were A*02-B*46-DRB1*09 (4.84%) and A*02-B*40-DRB1*09 (4.03%). Fourteen two-loci haplotypes had significant linkage disequilibrium. Construction of a neighbor-joining phylogenetic tree and principal component analysis using the allelic frequencies at HLA-A was performed to compare the Tujia group and twelve other previously reported populations. The Tujia population in the Wufeng of Hubei Province had the closest genetic relationship with the central Han population, and then to the Shui, the Miao, the southern Han and the northern Han ethnic groups. CONCLUSIONS/SIGNIFICANCE: These results will become a valuable source of data for tracing population migration, planning clinical organ transplantation, carrying out HLA-linked disease-associated studies and forensic identification
Unusual Layer-Dependent Charge Distribution, Collective Mode Coupling, and Superconductivity in Multilayer Cuprate Ba
Recommended from our members
Anomalous Fermi-Surface Dependent Pairing in a Self-Doped High-T(c) Superconductor
We report the discovery of a self-doped multilayer high T{sub c} superconductor Ba{sub 2}Ca{sub 3}Cu{sub 4}O{sub 8}F{sub 2} (F0234) which contains distinctly different superconducting gap magnitudes along its two Fermi-surface sheets. While formal valence counting would imply this material to be an undoped insulator, it is a self-doped superconductor with a T{sub c} of 60 K, possessing simultaneously both electron- and hole-doped Fermi-surface sheets. Intriguingly, the Fermi-surface sheet characterized by the much larger gap is the electron-doped one, which has a shape disfavoring two electronic features considered to be important for the pairing mechanism: the van Hove singularity and the antiferromagnetic ({pi}/{alpha}, {pi}/{alpha}) scattering
- …