90,476 research outputs found
Effects of uncertainties and errors on Lyapunov control
Lyapunov control (open-loop) is often confronted with uncertainties and
errors in practical applications. In this paper, we analyze the robustness of
Lyapunov control against the uncertainties and errors in quantum control
systems. The analysis is carried out through examinations of uncertainties and
errors, calculations of the control fidelity under influences of the
certainties and errors, as well as discussions on the caused effects. Two
examples, a closed control system and an open control system, are presented to
illustrate the general formulism.Comment: 4 pages, 5 figure
Gradient design of metal hollow sphere (MHS) foams with density gradients
This is the post-print version of the final paper published in Composites Part B: Engineering. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2011 Elsevier B.V.Metal hollow sphere (MHS) structures with a density gradient have attracted increasing attention in the effort to pursue improved energy absorption properties. In this paper, dynamic crushing of MHS structures of different gradients are discussed, with the gradients being received by stacks of hollow spheres of the same external diameter but different wall thicknesses in the crushing direction. Based on the dynamic performance of MHS structures with uniform density, a crude semi-empirical model is developed for the design of MHS structures in terms of gradient selections for energy absorption and protection against impact. Following this, dynamic responses of density graded MHS foams are comparatively analyzed using explicit finite element simulation and the proposed formula. Results show that the simple semi-empirical model can predict the response of density gradient MHS foams and is ready-to-use in the gradient design of MHS structures.The National Science Foundation of China and the State Key Laboratory of Explosion Science
and Technology (Beijing Institute of Technology
X-Ray Flares from Postmerger Millisecond Pulsars
Recent observations support the suggestion that short-duration gamma-ray
bursts are produced by compact star mergers. The X-ray flares discovered in two
short gamma-ray bursts last much longer than the previously proposed postmerger
energy release time scales. Here we show that they can be produced by
differentially rotating, millisecond pulsars after the mergers of binary
neutron stars. The differential rotation leads to windup of interior poloidal
magnetic fields and the resulting toroidal fields are strong enough to float up
and break through the stellar surface. Magnetic reconnection--driven explosive
events then occur, leading to multiple X-ray flares minutes after the original
gamma-ray burst.Comment: 10 pages, published in Scienc
Apparent first-order wetting and anomalous scaling in the two-dimensional Ising model
The global phase diagram of wetting in the two-dimensional (2d) Ising model
is obtained through exact calculation of the surface excess free energy.
Besides a surface field for inducing wetting, a surface-coupling enhancement is
included. The wetting transition is critical (second order) for any finite
ratio of surface coupling J_s to bulk coupling J, and turns first order in the
limit J_s/J to infinity. However, for J_s/J much larger than 1 the critical
region is exponentially small and practically invisible to numerical studies. A
distinct pre-asymptotic regime exists in which the transition displays
first-order character. Surprisingly, in this regime the surface susceptibility
and surface specific heat develop a divergence and show anomalous scaling with
an exponent equal to 3/2.Comment: This new version presents the exact solution and its properties
whereas the older version was based on an approximate numerical study of the
mode
Recommended from our members
Finite element modelling of atomic force microscope cantilever beams with uncertainty in material and dimensional parameters
Copyright © 2014 by Institute of Fundamental Technological Research
Polish Academy of Sciences, Warsaw, PolandThe stiffness and the natural frequencies of a rectangular and a V-shaped micro-cantilever beams used in Atomic Force Microscope (AFM) were analysed using the Finite Element (FE) method. A determinate analysis in the material and dimensional parameters was first carried out to compare with published analytical and experimental results. Uncertainties in the beams’ parameters such as the material properties and dimensions due to the fabrication process were then modelled using a statistic FE analysis. It is found that for the rectangular micro-beam, a ±5% change in the value of the parameters could result in 3 to 8-folds (up to more than 45%) errors in the stiffness or the 1st natural frequency of the cantilever. Such big uncertainties need to be considered in the design and calibration of AFM to ensure the measurement accuracy at the micron and nano scales. In addition, a sensitivity analysis was carried out for the influence of the studied parameters. The finding provides useful guidelines on the design of micro-cantilevers used in the AFM technology.The research was supported by Sichuan International Research Collaboration Project (2014HH0022)
Acoustical analysis of gear housing vibration
The modal and acoustical analysis of the NASA gear-noise rig is described. Experimental modal analysis techniques were used to determine the modes of vibration of the transmission housing. The resulting modal data were then used in a boundary element method (BEM) analysis to calculate the sound pressure and sound intensity on the surface of the housing as well as the radiation efficiency of each mode. The radiation efficiencies of the transmission housing modes are compared with theoretical results for finite, baffled plates. A method that uses the measured mode shapes and the BEM to predict the effect of simple structural changes on the sound radiation efficiency of the modes of vibration is also described
Reversible Embedding to Covers Full of Boundaries
In reversible data embedding, to avoid overflow and underflow problem, before
data embedding, boundary pixels are recorded as side information, which may be
losslessly compressed. The existing algorithms often assume that a natural
image has little boundary pixels so that the size of side information is small.
Accordingly, a relatively high pure payload could be achieved. However, there
actually may exist a lot of boundary pixels in a natural image, implying that,
the size of side information could be very large. Therefore, when to directly
use the existing algorithms, the pure embedding capacity may be not sufficient.
In order to address this problem, in this paper, we present a new and efficient
framework to reversible data embedding in images that have lots of boundary
pixels. The core idea is to losslessly preprocess boundary pixels so that it
can significantly reduce the side information. Experimental results have shown
the superiority and applicability of our work
- …