6,480 research outputs found
Friction and wear of plasma-deposited diamond films
Reciprocating sliding friction experiments in humid air and in dry nitrogen and unidirectional sliding friction experiments in ultrahigh vacuum were conducted with a natural diamond pin in contact with microwave-plasma-deposited diamond films. Diamond films with a surface roughness (R rms) ranging from 15 to 160 nm were produced by microwave-plasma-assisted chemical vapor deposition. In humid air and in dry nitrogen, abrasion occurred when the diamond pin made grooves in the surfaces of diamond films, and thus the initial coefficients of friction increased with increasing initial surface roughness. The equilibrium coefficients of friction were independent of the initial surface roughness of the diamond films. In vacuum the friction for diamond films contacting a diamond pin arose primarily from adhesion between the sliding surfaces. In these cases, the initial and equilibrium coefficients of friction were independent of the initial surface roughness of the diamond films. The equilibrium coefficients of friction were 0.02 to 0.04 in humid air and in dry nitrogen, but 1.5 to 1.8 in vacuum. The wear factor of the diamond films depended on the initial surface roughness, regardless of environment; it increased with increasing initial surface roughness. The wear factors were considerably higher in vacuum than in humid air and in dry nitrogen
Friction and Wear of Ion-Beam-Deposited Diamondlike Carbon on Chemical-Vapor-Deposited, Fine-Grain Diamond
Friction and wear behavior of ion-beam-deposited diamondlike carbon (DLC) films coated on chemical-vapor-deposited (CVD), fine-grain diamond coatings were examined in ultrahigh vacuum, dry nitrogen, and humid air environments. The DLC films were produced by the direct impact of an ion beam (composed of a 3:17 mixture of Ar and CH4) at ion energies of 1500 and 700 eV and an RF power of 99 W. Sliding friction experiments were conducted with hemispherical CVD diamond pins sliding on four different carbon-base coating systems: DLC films on CVD diamond; DLC films on silicon; as-deposited, fine-grain CVD diamond; and carbon-ion-implanted, fine-grain CVD diamond on silicon. Results indicate that in ultrahigh vacuum the ion-beam-deposited DLC films on fine-grain CVD diamond (similar to the ion-implanted CVD diamond) greatly decrease both the friction and wear of fine-grain CVD diamond films and provide solid lubrication. In dry nitrogen and in humid air, ion-beam-deposited DLC films on fine-grain CVD diamond films also had a low steady-state coefficient of friction and a low wear rate. These tribological performance benefits, coupled with a wider range of coating thicknesses, led to longer endurance life and improved wear resistance for the DLC deposited on fine-grain CVD diamond in comparison to the ion-implanted diamond films. Thus, DLC deposited on fine-grain CVD diamond films can be an effective wear-resistant, lubricating coating regardless of environment
Enhanced heat capacity and a new temperature instability in superfluid He-4 in the presence of a constant heat flux near T-lambda
We present the first experimental evidence that the heat capacity of superfluid 4He, at temperatures very close to the lambda point Tλ, is enhanced by a constant heat flux Q. The heat capacity at constant Q, CQ, is predicted to diverge at a temperature Tc(Q)<Tλ at which superflow becomes unstable. In agreement with previous measurements, we find that dissipation enters our cell at a temperature, TDAS(Q), below the theoretical value, Tc(Q). We argue that TDAS(Q) can be accounted for by a temperature instability at the cell wall, and is therefore distinct from Tc(Q). The excess heat capacity we measure has the predicted scaling behavior as a function of T and Q, but it is much larger than predicted by current theory
Ab initio theory and modeling of water
Water is of the utmost importance for life and technology. However, a
genuinely predictive ab initio model of water has eluded scientists. We
demonstrate that a fully ab initio approach, relying on the strongly
constrained and appropriately normed (SCAN) density functional, provides such a
description of water. SCAN accurately describes the balance among covalent
bonds, hydrogen bonds, and van der Waals interactions that dictates the
structure and dynamics of liquid water. Notably, SCAN captures the density
difference between water and ice I{\it h} at ambient conditions, as well as
many important structural, electronic, and dynamic properties of liquid water.
These successful predictions of the versatile SCAN functional open the gates to
study complex processes in aqueous phase chemistry and the interactions of
water with other materials in an efficient, accurate, and predictive, ab initio
manner
- …