An Inverse Geometry Problem for the Localization of Skin Tumours by Thermal Analysis

In this paper, the Dual Reciprocity Method (DRM) is coupled to a Genetic Algorithm (GA) in an inverse procedure through which the size and location of a skin tumour may be obtained from temperature measurements at the skin surface. The GA is an evolutionary process which does not require the calculation of sensitivities, search directions or the definition of initial guesses. The DRM in this case requires no internal nodes. It is also shown that the DRM approximation function used is not an important factor for the problem considered here. Results are presented for tumours of different sizes and positions in relation to the skin surface

A coupled dual reciprocity BEM/Genetic algorithm for identification of blood perfusion parameters

The paper presents an inverse analysis procedure based on a coupled numerical formulation through which the coefficients describing non-linear thermal properties of blood perfusion may be identified. The numerical technique involves a combination of the Dual Reciprocity Boundary Element Method and a Genetic Algorithm for the solution of the Pennes bioheat equation. Both linear and quadratic temperature-dependent variations are considered for the blood perfusion

Numerical analysis of the hydrodynamic behaviour of immiscible metallic alloys in twin-screw rheomixing process

A numerical analysis by a VOF method is presented for studying the hydrodynamic mechanisms of the rheomixing process by a twin-screw extruder (TSE). The simplified flow field is established based on a systematic analysis of flow features of immiscible alloys in TSE rheomixing process. The studies focus on the fundamental microstructure mechanisms of rheological behaviour in shear-induced turbulent flows. It is noted that the microstructure of immiscible alloys in the mixing process is strongly influenced by the interaction between droplets, which is controlled by shearing forces, viscosity ratio, turbulence, and shearing time. The numerical results show a good qualitative agreement with the experimental results, and are useful for further optimisation design of prototypical rheomixing processes

Hydrodynamic Analysis of Binary Immiscible Metallurgical Flow in a Novel Mixing Process: Rheomixing

This paper presents a hydrodynamic analysis of binary immiscible metallurgical flow by a numerical simulation of the rheomixing process. The concept of multi-controll is proposed for classifying complex processes and identifying individual processes in an immiscible alloy system in order to perform simulations. A brief review of fabrication methods for immiscible alloys is given, and fluid flow aspects of a novel fabrication method – rheomixing by twin-screw extruder (TSE) are analysed. Fundamental hydrodynamic micro-mechanisms in a TSE are simulated by a piecewise linear (PLIC) volume-of-fluid (VOF) method coupled with the continuum surface force (CFS) algorithm. This revealed that continuous reorientation in the TSE process could produce fine droplets and the best mixing efficiency. It is verified that TSE is a better mixing device than single screw extruder (SSE) and can achieve finer droplets. Numerical results show good qualitative agreement with experimental results. It is concluded that rheomixing by a TSE can be successfully employed for casting immiscible engineering alloys due to its unique characteristics of reorientation and surface renewal

Modified Green's Functions for Shallow Water Acoustic Wave Propagation

This article presents an assessment of alternative forms of the Green’s function for boundary element simulations of acoustic wave propagation in shallow water. It is assumed that the problem is two-dimensional, the source of acoustic disturbance is time-harmonic, the velocity of sound is constant and the medium in the absence of perturbations is quiescent. Efficient implementations of the boundary element method for underwater acoustics should employ Green's functions which directly satisfy the boundary conditions on the free surface and the horizontal parts of the bottom boundary. In the present work, these Green's functions are constructed by using different techniques, namely the method of images, eigenfunction expansions and the Ewald’s method

Steep-Spectrum Radio Emission from the Low-Mass Active Galactic Nucleus GH 10

GH 10 is a broad-lined active galactic nucleus (AGN) energized by a black hole of mass 800,000 Solar masses. It was the only object detected by Greene et al. in their Very Large Array (VLA) survey of 19 low-mass AGNs discovered by Greene & Ho. New VLA imaging at 1.4, 4.9, and 8.5 GHz reveals that GH 10's emission has an extent of less than 320 pc, has an optically-thin synchrotron spectrum with a spectral index -0.76+/-0.05, is less than 11 percent linearly polarized, and is steady - although poorly sampled - on timescales of weeks and years. Circumnuclear star formation cannot dominate the radio emission, because the high inferred star formation rate, 18 Solar masses per year, is inconsistent with the rate of less than 2 Solar masses per year derived from narrow Halpha and [OII] 3727 emission. Instead, the radio emission must be mainly energized by the low-mass black hole. GH 10's radio properties match those of the steep-spectrum cores of Palomar Seyfert galaxies, suggesting that, like those Seyferts, the emission is outflow-driven. Because GH 10 is radiating close to its Eddington limit, it may be a local analog of the starting conditions, or seeds, for supermassive black holes. Future imaging of GH 10 at higher resolution thus offers an opportunity to study the relative roles of radiative versus kinetic feedback during black-hole growth.Comment: 7 pages; 2 figures; emulateapj; to appear in Ap

Radio Emission on Sub-Parsec Scales from the Intermediate-Mass Black Hole in NGC 4395

The Seyfert 1 nucleus of NGC 4395 is energized by a black hole of 360,000 Solar masses (Peterson et al.), making it one of only two nuclear black holes of intermediate mass, one thousand to one million Solar masses, detected in the radio regime. Building upon UV and X-ray evidence for outflows from this Seyfert nucleus, the VLBI High Sensitivity Array was used at 1.4 GHz to search for extended structure on scales greater than 5 mas (0.1 pc). Elongated emission was discovered, extending over 15 mas (0.3 pc) and suggesting an outflow on sub-parsec scales from this intermediate-mass black hole. The Seyfert nucleus is located at the center of an elliptical star cluster, and the elongation position angle of the sub-parsec radio structure is only 19 degrees from the star cluster's minor axis.Comment: 5 pages; 1 figure; emulateapj; to appear in ApJ

Large eddy simulation of plume dispersion behind an aircraft in the take-off phase

The aim of this paper is to provide an investigation, using large eddy simulation, into plume dispersion behind an aircraft in co-flowing take-off conditions. Validation studies of the computational model were presented by Aloysius and Wrobel (Environ Model Softw 24:929–937, 2009) and a study of the flow and dispersion properties of a double-engine aircraft jetwas presented by Aloysius et al. EEC/SEE/2007/001,EUROCONTROLExperimentalCentre, http://www.eurocontrol.int/eec/gallery/content/public/document/eec/report/2007/ 032_ALAQS_comparison_of_CFD_and_Lagrangian_dispersion_methods.pdf), in which only the engine was modelled. In this paper, the complete geometry of a Boeing 737 is modelled and investigated. The currentwork represents a contribution towards a better understanding of the source dynamics behind an airplane jet engine during the take-off and landing phases. The information provided from these simulations will be useful for future improvements of existing dispersion models

Multi-focal laser surgery: cutting enhancement by hydrodynamic interactions between cavitation bubbles

Transparent biological tissues can be precisely dissected with ultrafast lasers using optical breakdown in the tight focal zone. Typically, tissues are cut by sequential application of pulses, each of which produces a single cavitation bubble. We investigate the hydrodynamic interactions between simultaneous cavitation bubbles originating from multiple laser foci. Simultaneous expansion and collapse of cavitation bubbles can enhance the cutting efficiency by increasing the resulting deformations in tissue, and the associated rupture zone. An analytical model of the flow induced by the bubbles is presented and experimentally verified. The threshold strain of the material rupture is measured in a model tissue. Using the computational model and the experimental value of the threshold strain one can compute the shape of the rupture zone in tissue resulting from application of multiple bubbles. With the threshold strain of 0.7 two simultaneous bubbles produce a continuous cut when applied at the distance 1.35 times greater than that required in sequential approach. Simultaneous focusing of the laser in multiple spots along the line of intended cut can extend this ratio to 1.7. Counter-propagating jets forming during collapse of two bubbles in materials with low viscosity can further extend the cutting zone - up to a factor of 1.54.Comment: 16 pages, 8 figures. Paper is accepted for publication in Physical Review

Outflow-Dominated Emission from the Quiescent Massive Black Holes in NGC 4621 and NGC 4697

The nearby elliptical galaxies NGC 4621 and NGC 4697 each host a supermassive black hole with a mass more than 1e8 Solar masses. Analysis of archival Chandra data and new NRAO Very Large Array data shows that each galaxy contains a low-luminosity active galactic nucleus (LLAGN), identified as a faint, hard X-ray source that is astrometrically coincident with a faint 8.5-GHz source. The latter has a diameter less than 0.3 arcsec (26 pc for NGC 4621, 17 pc for NGC 4697). The black holes energizing these LLAGNs have Eddington ratios L(2-10 keV) / L(Edd) ~ 1e-9, placing them in the so-called quiescent regime. The emission from these quiescent black holes is radio-loud, with log Rx = log nuLnu(8.5 GHz) / L(2-10 keV) ~ -2, suggesting the presence of a radio outflow. Also, application of the radio-X-ray-mass relation from Yuan & Cui for quiescent black holes predicts the observed radio luminosities nuLnu(8.5 GHz) to within a factor of a few. Significantly, that relation invokes X-ray emission from the outflow rather than from an accretion flow. The faint, but detectable, emission from these two massive black holes is therefore consistent with being outflow-dominated. Observational tests of this finding are suggested.Comment: 11 pages; 4 figures: emulateapj; to appear in Ap