57 research outputs found
Forming simulation of a thermoplastic commingled woven textile on a double dome
This paper presents thermoforming experiments and FE simulations of a commingled glass-PP woven composite on a double dome geometry, with the aim of assessing the correspondence of predicted and experimental shear angles. Large local deformations - especially in-plane shear, i.e. relative rotation between the two yarn families – occur when draping a textile on a three dimensional part and eventually unwanted phenomena like wrinkling or tearing may occur. The macroscopic drape behaviour of a weave is generally subdivided into: 1) The high tensile resistance along the yarn directions, expressed as non-linear stress-strain curves, and 2) The shear resistance, expressed as non-linear shear force versus shear angle curves. The constitutive model is constituted of a dedicated non-orthogonal hypo-elastic shear resistance model, previously described in [1, 2], combined with truss elements that represent the high tensile resistance along the yarn directions. This model is implemented in a user subroutine of the ABAQUS explicit FE solver. The material parameters have been identified via textile biaxial tensile tests at room temperature and bias extension tests at 200°. Thermoforming experiments are performed on a rectangular blank with the warp direction along the second symmetry plane of the tool, with a preheating temperature of 200°C, a constant mold temperature of about 70°C, and a blankholder ring. It was concluded that the shear angles were fairly well predicted for this particular case study, which could be expected in view of the fact that no wrinkles had formed during the thermoforming experiment
Shear behavior of a shear thickening fluid-impregnated aramid fabrics at high shear rate
Shear-thickening fluid-impregnated aramid (STF-im-AR) fabrics have been manufactured for advanced soft body armor applications for which they provide improved ballistic and stab resistances. It is not yet clear whether or not such improvements can be attributed solely to the STF. In this study, the rate-dependent behavior of an STF-im-AR fabric was investigated at the fabric level, using uniaxial tensile, bias-extension, and picture-frame tests. Rate-dependent behavior of the STF-im-AR fabric was observed during uniaxial tensile testing; however, the effect of the STF treatment was slight and consistent with only the inherent effect of the polymeric nature of its constituent fibers. The shear rigidity of the STF-im-AR fabric increased, due to the presence of the STF and the sensitivity of the fabric's shear stiffness to changes in the shear strain rate also increased slightly. This rate-sensitive shear stiffness of STF-im-AR fabrics may contribute to improved ballistic and stab resistances
Three-dimensional constitutive model for shape memory polymers using multiplicative decomposition of the deformation gradient and shape memory strains
Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation
The forming behaviour of non-crimp fabric (NCF) was simulated using finite element (FE) analysis incorporating a non-orthogonal constitutive model. NCFs feature asymmetric shear behaviour caused by the stitching used to hold the tows together. This asymmetric shear property causes an asymmetric draping pattern of NCF, even when formed over a symmetrical hemispherical forming tool. Current work focuses on the feasibility of a continuum mechanics model to simulate the asymmetric forming behaviour of NCF. The constitutive equation consists of two parts: the tensile contribution from fibre reinforcement and the shear stiffness. For the fibre directional properties, a non-orthogonal equation originally developed for woven fabric was adopted. The shear stiffness was modelled through a constitutive equation incorporating picture-frame shear data. Both a picture-frame shear test and forming of NCF over a hemisphere tool were simulated by commercial finite element software with the current constitutive model implemented within a user material subroutine. The virtual picture-frame test confirmed the validity of the constitutive equation in simulating planar deformation behaviour of NCF. Furthermore, the numerical analysis of hemispherical forming suggests that increasing blank-holder force decreases the asymmetry of the draped pattern
Detection of delamination of steel–polymer sandwich composites using acoustic emission and development of a forming limit diagram considering delamination
The formability of steel–polymer sandwich composites was investigated using a new forming limit diagram (FLD) while considering delamination and fracture. The acoustic emission (AE) technique was used to observe delamination during the forming process. Several tests, including tensile and lap shear tests, were performed to identify the AE features of delamination. In addition, finite element simulations were carried out using the cohesive zone model to predict the delamination of steel–polymer sandwich composites. An FLD of the sandwich composite was also constructed using the finite element model. Finally, the effect of interfacial adhesion on the formability of sandwich composites was investigated, from which the optimal condition for interfacial adhesion (in terms of ensuring the formability of the sandwich composite) was obtained
Tension-induced twist of twist-spun carbon nanotube yarns and its effect on their torsional behavior
Abstract Twist-spun carbon nanotube (CNT) yarns exhibit a large and reversible rotational behavior under specific boundary conditions. In situ polarized Raman spectroscopy revealed that a tension-induced twist provides reversibility to this rotation. The orientation changes of individual CNTs were followed when twist-spun CNT yarns were untwisted and subsequently retwisted. Twist-spun CNT yarn, when untwisted and subsequently retwisted under the one-ended tethered boundary condition, showed irreversible orientation changes of the individual CNTs due to snarls formed during the untwisting operation, which resulted in macroscopic irreversible rotational behavior of the CNT yarns. In contrast, the orientation changes of the individual CNTs in twist-spun CNT yarn, when operated under the two-ended tethered boundary condition, were hysteretically reversible due to a tension-induced twist, which has not been reported previously. Indeed, the tension-induced twist was observed by following the orientation change of individual CNTs in elongated CNT yarns, which simulated the deformational behavior of the CNT yarn rotated under the two-ended tethered boundary condition
비뉴턴 유체를 이용한 스마트 과속방지턱 소재 개발
In this study, a smart material applicable to speed bumps was developed using low-cost starch and water-based suspensions, and their properties were investigated. Viscosity and shear stress according to the shear rate was measured by a rheometer to observe shear thickening behavior according to starch concentration. The shear thickening phenomenon and applicability to speed bumps were identified macroscopically via drop weight test and bike driving test, measuring the vibration after impact with a driving speed of 5-25 km/h. As a result of the viscosity measurement, shear thickening occurred after the shear thinning region at the beginning, and the critical strain causing the shear thickening phenomenon decreased as the concentration of starch increased. Also, the viscosity and shear stress increased significantly with the increase of the starch concentration. As a result of the drop weight test and the bike driving test, the suspension was changed to a solid-like state in a short time, and the impact energy was absorbed in the fluid. The shear thickening phenomenon easily occurred as the concentration of the fluid and the applied impact (velocity) increased. Therefore, it can be proposed the development of a smart speed bump material that operates in the range of 5-25 km/h with a Non-Newtonian fluid based on water and starch.N
- …