Assessment of ultraviolet radiation exposures in photobiological experiments

The interfering effect of ultraviolet (UV) radiation on the natural function of biological processes is wavelength specific and the UV spectrum must be weighted with the action spectrum for the process. The UV spectral irradiance may be measured with calibrated spectroradiometers. Alternatively, the biologically effective UV may be measured with broadband devices. This paper reviews the techniques for assessing biologically effective exposures in photobiological experiments. UV meters, such as the Robertson-Berger (RB) meter, or passive dosimeters, such as polysulphone, that possess a spectral response approximating the human erythemal response can be used to estimate erythemally effective exposure or actinic exposure due to solar UV. The sensitivity of the RB meter is about 0.56 uW cm-2 and polysulphone can record an exposure of about 2mJ cm-2. For photobiological processes other than erythema these devices are not suitable to determine the exposure. In terms of these applications, a spectrum evaluator consisting of four different types of dosimeter material can be employed to evaluate the UV spectrum of the source. This method can be useful both for solar UV studies and research with UV lamps that possess radiation wavelengths shorter than 295nm. The device can be used to measure exposures where the actinic and erythemal action spectra differ significantly. It can also be used to assess exposure due to low levels of UV (about 0.01uW cm-2) caused by radiation filtered through glasses or plastic

Surface roughness influence on the quality factor of high frequency nanoresonators

Surface roughness influences significantly the quality factor of high frequency nanoresonators for large frequency - relaxation times within the non-Newtonian regime, where a purely elastic dynamics develops. It is shown that the influence of sort wavelength roughness, which is expressed by the roughness exponent H for the case of self-affine roughness, plays significant role in comparison with the effect of the long wavelength roughness parameters such as the rms roughness amplitude and the lateral roughness correlation length. Therefore, the surface morphology can play important role in designing high-frequency resonators operating within the non-Newtonian regime.Comment: 13 pages, 4 figures, To appear in J. Appl. Phys. (2008

Pion Interferometry for a Granular Source of Quark-Gluon Plasma Droplets

We examine the two-pion interferometry for a granular source of quark-gluon plasma droplets. The evolution of the droplets is described by relativistic hydrodynamics with an equation of state suggested by lattice gauge results. Pions are assumed to be emitted thermally from the droplets at the freeze-out configuration characterized by a freeze-out temperature $T_f$. We find that the HBT radius $R_{out}$ decreases if the initial size of the droplets decreases. On the other hand, $R_{side}$ depends on the droplet spatial distribution and is relatively independent of the droplet size. It increases with an increase in the width of the spatial distribution and the collective-expansion velocity of the droplets. As a result, the value of $R_{out}$ can lie close to $R_{side}$ for a granular quark-gluon plasma source. The granular model of the emitting source may provide an explanation to the RHIC HBT puzzle and may lead to a new insight into the dynamics of the quark-gluon plasma phase transition.Comment: 5 pages, 4 figure

Electronic visualization of gas bearing behavior

Visualization technique produces a visual simulation of gas bearing operation by electronically combining the outputs from the clearance probes used to monitor bearing component motion. Computerized recordings of the probes output are processed, displayed on an oscilloscope screen and recorded with a high-speed motion picture camera

Analysis and computer programs to calculate acoustic wave properties of baffled chambers

Analytical methods and four computer programs have been developed for calculating wave motion in closed, baffled chambers with rigid and non-rigid boundaries. Application of these methods to design of injector-face baffles in liquid propellant engines will provide significant insight into effects of baffles on combustion stability

Effect of cloud on UVA and exposure to humans

The daily autumn and winter UVA exposures and 6-minute UVA irradiance data for a Southern Hemisphere, subtropical site (Toowoomba, Australia, 27.6 S, 151.9 E) are presented. This data is used to quantify the effect of cloud on UVA using an integrated sky-camera and radiation system. Additionally, an estimate of the effect of enhanced UVA exposure on humans is made. The measurement system consisted of broadband visible-infrared and UVA sensors together with a sun tracking, wide-angle video camera. The mean daily June exposure was found to be 409 kJm-2. Under the constraints of the uncertainty of both the UVA measurement system and clear-sky model, one case of enhanced UVA irradiance was found. Three cases of cloud enhancement of daily UVA exposure, approaching clear-sky levels, were also determined using a calculated clear-sky envelope. It was also determined that for a fulltime outdoor worker, the additional UVA exposure could approach approximately that of one third of a full winter's day. For indoor workers with an outside lunch break of noon to 1 pm, the additional UVA exposure was on average 6.9 kJm-2 over three cloud enhanced days. To the authors' knowledge this is the first paper to present some evidence of cloud enhanced UVA human exposure

PLAN-IT: Scheduling assistant for solar system exploration

A frame-based expert scheduling system shell, PLAN-IT, is developed for spacecraft scheduling in the Request Integration Phase, using the Comet Rendezvous Asteroid Flyby (CRAF) mission as a development base. Basic, structured, and expert scheduling techniques are reviewed. Data elements such as activity representation and resource conflict representation are discussed. Resource constraints include minimum and maximum separation times between activities, percentage of time pointed at specific targets, and separation time between targeted intervals of a given activity. The different scheduling technique categories and the rationale for their selection are also considered