Plasmonic terahertz detectors based on a high-electron mobility GaAs/AlGaAs heterostructure

In order to characterize magnetic-field (B) tunable THz plasmonic detectors, spectroscopy experiments were carried out at liquid helium temperatures and high magnetic fields on devices fabricated on a high electron mobility GaAs/AlGaAs heterostructure. The samples were either gated (the gate of a meander shape) or ungated. Spectra of a photovoltage generated by THz radiation were obtained as a function of B at a fixed THz excitation from a THz laser or as a function of THz photon frequency at a fixed B with a Fourier spectrometer. In the first type of measurements, the wave vector of magnetoplasmons excited was defined by geometrical features of samples. It was also found that the magnetoplasmon spectrum depended on the gate geometry which gives an additional parameter to control plasma excitations in THz detectors. Fourier spectra showed a strong dependence of the cyclotron resonance amplitude on the conduction-band electron filling factor which was explained within a model of the electron gas heating with the THz radiation. The study allows to define both the advantages and limitations of plasmonic devices based on high-mobility GaAs/AlGaAs heterostructures for THz detection at low temperatures and high magnetic fields.Comment: 8 pages, 11 figure

Quasi-classical cyclotron resonance of Dirac fermions in highly doped graphene

Cyclotron resonance in highly doped graphene has been explored using infrared magnetotransmission. Contrary to previous work, which only focused on the magneto-optical properties of graphene in the quantum regime, here we study the quasi-classical response of this system. We show that it has a character of classical cyclotron resonance, with an energy which is linear in the applied magnetic field and with an effective cyclotron mass defined by the position of the Fermi level m = E_F/v_F^2.Comment: 6 pages, 4 figure

An Estimate of the Energy Gap of InN from Measurements of the Fundamental Absorption Edge

Optical absorption between 0.4 and 4.5 eV of an InN layer grown by metalorganic vapour phase epitaxy on sapphire was measured at 296 and 12 K. The layer was also characterized by measurements of the Hall effect and of infrared reflectivity in the region of the plasma edge, which determined the concentration, mobility, and effective mass of electrons in the conduction band. The energy gap of InN was estimated to be equal to 0.9 ± 0.2 eV. It was obtained from the spectral position of the fundamental absorption edge. Corrections to the energy gap resulting from the broadening of the fundamental absorption edge, from the Burstein-Moss shift, and from a band-gap shrinkage due to the impurity potential were included

BIOKID: Randomized controlled trial comparing bicarbonate and lactate buffer in biocompatible peritoneal dialysis solutions in children [ISRCTN81137991]

BACKGROUND: Peritoneal dialysis (PD) is the preferred dialysis modality in children. Its major drawback is the limited technique survival due to infections and progressive ultrafiltration failure. Conventional PD solutions exert marked acute and chronic toxicity to local tissues. Prolonged exposure is associated with severe histopathological alterations including vasculopathy, neoangiogenesis, submesothelial fibrosis and a gradual loss of the mesothelial cell layer. Recently, more biocompatible PD solutions containing reduced amounts of toxic glucose degradation products (GDPs) and buffered at neutral pH have been introduced into clinical practice. These solutions contain lactate, bicarbonate or a combination of both as buffer substance. Increasing evidence from clinical trials in adults and children suggests that the new PD fluids may allow for better long-term preservation of peritoneal morphology and function. However, the relative importance of the buffer in neutral-pH, low-GDP fluids is still unclear. In vitro, lactate is cytotoxic and vasoactive at the concentrations used in PD fluids. The BIOKID trial is designed to clarify the clinical significance of the buffer choice in biocompatible PD fluids. METHODS/DESIGN: The objective of the study is to test the hypothesis that bicarbonate based PD solutions may allow for a better preservation of peritoneal transport characteristics in children than solutions containing lactate buffer. Secondary objectives are to assess any impact of the buffer system on acid-base status, peritoneal tissue integrity and the incidence and severity of peritonitis. After a run-in period of 2 months during which a targeted cohort of 60 patients is treated with a conventional, lactate buffered, acidic, GDP containing PD fluid, patients will be stratified according to residual renal function and type of phosphate binding medication and randomized to receive either the lactate-containing Balance solution or the bicarbonate-buffered Bicavera(® )solution for a period of 10 months. Patients will be monitored by monthly physical and laboratory examinations. Peritoneal equilibration tests, 24-h dialysate and urine collections will be performed 4 times. Peritoneal biopsies will be obtained on occasion of intraabdominal surgery. Changes in small solute transport rates, markers of peritoneal tissue turnover in the effluent, acid-base status and peritonitis rates and severity will be analyzed

Decision-making based on 3D printed models in laparoscopic liver resections with intraoperative ultrasound: A prospective observational study

OBJECTIVES: The aim of this study was to evaluate impact of 3D printed models on decision-making in context of laparoscopic liver resections (LLR) performed with intraoperative ultrasound (IOUS) guidance. METHODS: Nineteen patients with liver malignances (74% were colorectal cancer metastases) were prospectively qualified for LLR or radiofrequency ablation in a single center from April 2017 to December 2018. Models were 3DP in all cases based on CT and facilitated optical visualization of tumors\u27 relationships with portal and hepatic veins. Planned surgical extent and its changes were tracked after CT analysis and 3D model inspection, as well as intraoperatively using IOUS. RESULTS: Nineteen patients were included in the analysis. Information from either 3DP or IOUS led to changes in the planned surgical approach in 13/19 (68%) patients. In 5/19 (26%) patients, the 3DP model altered the plan of the surgery preoperatively. In 4/19 (21%) patients, 3DP independently changed the approach. In one patient, IOUS modified the plan post-3DP. In 8/19 (42%) patients, 3DP model did not change the approach, whereas IOUS did. In total, IOUS altered surgical plans in 9 (47%) cases. Most of those changes (6/9; 67%) were caused by detection of additional lesions not visible on CT and 3DP. CONCLUSIONS: 3DP can be helpful in planning complex and major LLRs and led to changes in surgical approach in 26.3% (5/19 patients) in our series. 3DP may serve as a useful adjunct to IOUS. KEY POINTS: • 3D printing can help in decision-making before major and complex resections in patients with liver cancer. • In 5/19 patients, 3D printed model altered surgical plan preoperatively. • Most surgical plan changes based on intraoperative ultrasonography were caused by detection of additional lesions not visible on CT and 3D model

Free carrier effects in gallium nitride epilayers: the valence band dispersion

The dispersion of the A-valence-band in GaN has been deduced from the observation of high-index magneto-excitonic states in polarised interband magneto-reflectivity and is found to be strongly non-parabolic with a mass in the range 1.2-1.8 m_{e}. It matches the theory of Kim et al. [Phys. Rev. B 56, 7363 (1997)] extremely well, which also gives a strong k-dependent A-valence-band mass. A strong phonon coupling leads to quenching of the observed transitions at an LO-phonon energy above the band gap and a strong non-parabolicity. The valence band was deduced from subtracting from the reduced dispersion the electron contribution with a model that includes a full treatment of the electron-phonon interaction.Comment: Revtex, 4 pages, 5 figure

In vivo effects of interleukin-17 on haematopoietic cells and cytokine release in normal mice

In order to gain more insight into mechanisms operating on the haematopoietic activity of the T-cell-derived cytokine, interleukin-17 (IL-17) and target cells that first respond to its action in vivo, the influence of a single intravenous injection of recombinant mouse IL-17 on bone marrow progenitors, further morphologically recognizable cells and peripheral blood cells was assessed in normal mice up to 72 h after treatment. Simultaneously, the release of IL-6, IL-10, IGF-I, IFN-gamma and NO by bone marrow cells was determined. Results showed that, in bone marrow, IL-17 did not affect granulocyte-macrophage (CFU-GM) progenitors, but induced a persistant increase in the number of morphologically recognizable proliferative granulocytes (PG) up to 48 h after treatment. The number of immature erythroid (BFU-E) progenitors was increased at 48 h, while the number of mature erythroid (CFU-E) progenitors was decreased up to 48 h. In peripheral blood, white blood cells were increased 6 h after treatment, mainly because of the increase in the number of lymphocytes. IL-17 also increased IL-6 release and NO production 6 h after administration. Additional in vitro assessment on bone marrow highly enriched Lin(-) progenitor cells, demonstrated a slightly enhancing effect of IL-17 on CFU-GM and no influence on BFU-E, suggesting the importance of bone marrow accessory cells and secondary induced cytokines for IL-17 mediated effects on progenitor cells. Taken together, these results demonstrate that in vivo IL-17 affects both granulocytic and erythroid lineages, with more mature haematopoietic progenitors responding first to its action. The opposite effects exerted on PG and CFU-E found at the same time indicate that IL-17, as a component of a regulatory network, is able to intervene in mechanisms that shift haematopoiesis from the erythroid to the granulocytic lineage

Evaluation of surface analysis methods for characterization of trace metal surface contaminants found in silicon IC manufacturing

A major topic at recent silicon-based integrated circuit (IC) manufacturing symposia is the pursuit of decreased contamination levels. The aim is to remove contamination from both processes and materials. In conjunction with this effort, characterization methods are being pushed to lower and lower detection limits. In this paper, we evaluate surface analysis methods used to determine the concentration of inorganic contamination on unpatterned Si wafers. We compare sampling depths, detection limits, and applicability of each method for use in support of Si IC manufacturing. This comparison is further limited to Fe and Cu which are transition metal contaminants associated with manufacturing yield loss. The surface analysis methods included in this evaluation are: Total Reflection X-Ray Fluorescence (TXRF or TRXRF); Secondary Ion Mass Spectrometry (SIMS); two post-ionization'' methods Surface Analysis by Laser Ionization (SALI) and Sputter Initiated Resonant Ionization Spectroscopy (SIRIS); Heavy Ion Backscattering Spectroscopy (HIBS); and Vapor Phase Phase Decomposition (VPD) based methods Atomic Absorption (VPD-AA) along with VPD-TXRF. Sets of 6 in. Si wafers with concentration levels between 10{sup 9} atoms/cm{sup 2} and 10{sup 12} atoms/cm{sup 2} Fe and Cu were characterized by TXRF, SIMS, SIRIS, and HIBS. This data allows estimation of detection limits (DLs) and relative method accuracy. In Section 1 we describe each surface analysis method and the circumstance under which it would be used to support Si IC manufacturing. The equipment used for this comparison and the 150 mm Si wafer set are described in Section 2. Results from each method are contrasted in Section 3. Finally, a conclusion is presented in Section 4