Wide-angle flat field telescope

Described is an unobscured three mirror wide angle telescopic imaging system comprised of an input baffle which provides a 20 deg (Y axis) x 30 deg (X axis) field of view, a primary mirror having a convex spherical surface, a secondary mirror having a concave ellipsoidal reflecting surface, a tertiary mirror having a concave spherical reflecting surface. The mirrors comprise mirror elements which are offset segments of parent mirrors whose axes and vertices commonly lie on the system's optical axis. An iris diaphragm forming an aperture stop is located between the secondary and tertiary mirror with its center also being coincident with the optical axis and being further located at the beam waist of input light beams reflected from the primary and secondary mirror surfaces. At the system focus following the tertiary mirror is located a flat detector which may be, for example, a TV imaging tube or a photographic film. When desirable, a spectral transmission filter is placed in front of the detector in close proximity thereto

Estimating sunspot number

An empirical method is developed to predict certain parameters of future solar activity cycles. Sunspot cycle statistics are examined, and curve fitting and linear regression analysis techniques are utilized

Measurement of non-Gaussian shot noise: influence of the environment

We present the first measurements of the third moment of the voltage fluctuations in a conductor. This technique can provide new and complementary information on the electronic transport in conducting systems. The measurement was performed on non-superconducting tunnel junctions as a function of voltage bias, for various temperatures and bandwidths up to 1GHz. The data demonstrate the significant effect of the electromagnetic environment of the sample.Comment: 13 pages, for the SPIE International Symposium on Fluctuations and Noise, Maspalomas, Gran Canaria, Spain (May 2004

Sources of uncertainties in modelling black carbon at the global scale

Our understanding of the global black carbon (BC) cycle is essentially qualitative due to uncertainties in our knowledge of its properties. This work investigates two source of uncertainties in modelling black carbon: those due to the use of different schemes for BC ageing and its removal rate in the global Transport-Chemistry model TM5 and those due to the uncertainties in the definition and quantification of the observations, which propagate through to both the emission inventories, and the measurements used for the model evaluation. The schemes for the atmospheric processing of black carbon that have been tested with the model are (i) a simple approach considering BC as bulk aerosol and a simple treatment of the removal with fixed 70% of in-cloud black carbon concentrations scavenged by clouds and removed when rain is present and (ii) a more complete description of microphysical ageing within an aerosol dynamics model, where removal is coupled to the microphysical properties of the aerosol, which results in a global average of 40% in-cloud black carbon that is scavenged in clouds and subsequently removed by rain, thus resulting in a longer atmospheric lifetime. This difference is reflected in comparisons between both sets of modelled results and the measurements. Close to the sources, both anthropogenic and vegetation fire source regions, the model results do not differ significantly, indicating that the emissions are the prevailing mechanism determining the concentrations and the choice of the aerosol scheme does not influence the levels. In more remote areas such as oceanic and polar regions the differences can be orders of magnitude, due to the differences between the two schemes. The more complete description reproduces the seasonal trend of the black carbon observations in those areas, although not always the magnitude of the signal, while the more simplified approach underestimates black carbon concentrations by orders of magnitude. The sensitivity to wet scavenging has been tested by varying in-cloud and below-cloud removal. BC lifetime increases by 10% when large scale and convective scale precipitation removal efficiency are reduced by 30%, while the variation is very small when below-cloud scavenging is zero. Since the emission inventories are representative of elemental carbon-like substance, the model output should be compared to elemental carbon measurements and if known, the ratio of black carbon to elemental carbon mass should be taken into account when the model is compared with black carbon observation

Heavy Quark Potential from Gauge/Gravity Duality: A Large D Analysis

The heavy-quark potential is calculated in the framework of gauge/gravity duality using the large-D approximation, where D is the number of dimensions transverse to the flux tube connecting a quark and an antiquark in a flat D+2-dimensional spacetime. We find that in the large-D limit the leading correction to the ground-state energy, as given by an effective Nambu-Goto string, arises not from the heavy modes but from the behavior of the massless modes in the vicinity of the quark and the antiquark. We estimate this correction and find that it should be visible in the near-future lattice QCD calculations of the heavy-quark potential.Comment: 22 pages, 5 Figures. v2: references added, typos corrected and, Sec. 4 rewritten with an expanded non-perturbative discussion of the corrections to the Arvis potential arising from the massless modes near the boundary of the qcd strin

Study of an advanced transport airplane design concept known as Flatbed

The design concept and configuration of the Flatbed transport aircraft are presented. The Flatbed configuration combines into one frame, the ability to haul cargo, virtually unrestrained by cross sectional dimensions of the fuselage. The feasibility and capability of the Flatbed is discussed in depth

Design, development and evaluation of Stanford/Ames Extra-Vehicular Activity (EVA) prehensors

A summary is given of progress to date on work proposed in 1983 and continued in 1985, including design iterations on three different types of manually powered prehensors, construction of functional mockups of each and culminating in detailed drawings and specifications for suit-compatible sealed units for testing under realistic conditions

Um novo peixe rivulíneo miniatura da bacia do alto rio Negro, Norte do Brasil (Teleostei, Cypridontiformes, Rivulidae)

Rivulus romeri sp.nov. is described from a small stream tributary of Igarapé Iauiari, upper Negro river drainage, Amazonian basin, northern Brazil. It seems to be closely related to R. atratus Garman, 1895 and R. ornatus Garman, 1895 by all sharing apomorphic frontal squamation and head color pattern. It is diagnosed by the long and pointed anal fin of male, also present in R. gransabanae Lasso, Taphorn Thomerson, 1992, and constitutes the smallest species of the genus. The long and narrow basihyal of R. romeri sp.nov. seems to be unique among congeners.Rivulus romeri sp.nov., coletada num pequeno riacho tributário do Igarapé Iauiari, drenagem do alto rio Negro, é descrita. Parece proximamente relacionada a R. atratus Garman, 1895 e R. ornatus Garman, 1895 por todas compartilharem escamação frontal e padrão de colorido de cabeça apomórficos. É diagnosticada pela nadadeira anal do macho longa e pontiaguda, também presente em R. gransabanae Lasso, Taphorn Thomerson, 1992, e constitui a menor espécie do gênero. O longo e estreito basial de R. romeri sp.nov. parece ser exclusivo entre as congêneres