130 research outputs found
DSMC simulations of Mach 20 nitrogen flows about a 70 degree blunted cone and its wake
Numerical results obtained with the direct simulation Monte Carlo (DSMC) method are presented for Mach 20 nitrogen flow about a 70-deg blunted cone. The flow conditions simulated are those that can be obtained in existing low-density hypersonic wind tunnels. Three sets of flow conditions are simulated with freestream Knudsen numbers ranging from 0.03 to 0.001. The focus is to characterize the wake flow under rarefied conditions. This is accomplished by calculating the influence of rarefaction on wake structure along with the impact that an afterbody has on flow features. This data report presents extensive information concerning flowfield features and surface quantities
Direct Monte Carlo Simulations of Hypersonic Low-Density Flows about an ASTV Including Wake Structure
Results of a numerical study concerning flow past a 70-deg blunted cone in hypersonic low-density flow environments are presented using the direct simulation Monte-Carlo method. The flow conditions simulated are those that can be obtained in existing low-density hypersonic wind tunnels. Results indicate that a stable vortex forms in the near wake at and below a freestream Knudsen number (based on cone diameter) of 0.01 and the size of the vortex increases with decreasing Knudsen number. The base region of the flow remains in thermal nonequilibrium for all cases considered herein
Mars Pathfider Rarefied Aerodynamics: Computations and Measurements
On July 4, 1997, after traveling close to 500 million km, the Pathfinder spacecraft successfully completed entry, descent, and landing at Mars. In the present paper, the focus is on the hypersonic rarefied portion of Pathfinder's atmospheric entry where the synergy of flight measurements, aerodynamic calculations, and atmospheric modeling tools are used to extract Pathfinder's attitude and the freestream density. Accuracy of the capsule aerodynamics directly impacts the inferred atmospheric properties extracted from deceleration measurements made by on-board accelerometers. The range of rarefaction considered in this study extends from the free molecular to continuum conditions and angles of attack from O to 30 deg. The aerodynamic computations are made with free-molecular and direct simulation Monte Carlo codes. The calculations show that Pathfinder is statically unstable for much of the transitional rarefied regime. Due to the relatively modest forces and the gyroscopic motion of the spacecraft, the angle of attack excursions were less than 5 deg as inferred from force measurements for the rarefied portion of entry and approached a nominal zero degree trim angle near hypersonic continuum conditions
Effects of Chemistry on Blunt-Body Wake Structure
Results of a numerical study are presented for hypersonic low-density flow about a 70-deg blunt cone using direct simulation Monte Carlo (DSMC) and Navier-Stokes calculations. Particular emphasis is given to the effects of chemistry on the near-wake structure and on the surface quantities and the comparison of the DSMC results with the Navier-Stokes calculations. The flow conditions simulated are those experienced by a space vehicle at an altitude of 85 km and a velocity of 7 km/s during Earth entry. A steady vortex forms in the near wake for these freestream conditions for both chemically reactive and nonreactive air gas models. The size (axial length) of the vortex for the reactive air calculations is 25% larger than that of the nonreactive air calculations. The forebody surface quantities are less sensitive to the chemistry than the base surface quantities. The presence of the afterbody has no effect on the forebody flow structure or the surface quantities. The comparisons of DSMC and Navier-Stokes calculations show good agreement for the wake structure and the forebody surface quantities
Burst Testing of Triaxial Braided Composite Tubes
Applications using triaxial braided composites are limited by the materials transverse strength which is determined by the delamination capacity of unconstrained, free-edge tows. However, structural applications such as cylindrical tubes can be designed to minimize free edge effects and thus the strength with and without edge stresses is relevant to the design process. The transverse strength of triaxial braided composites without edge effects was determined by internally pressurizing tubes. In the absence of edge effects, the axial and transverse strength were comparable. In addition, notched specimens, which minimize the effect of unconstrained tow ends, were tested in a variety of geometries. Although the commonly tested notch geometries exhibited similar axial and transverse net section failure strength, significant dependence on notch configuration was observed. In the absence of unconstrained tows, failure ensues as a result of bias tow rotation, splitting, and fracture at cross-over regions
Monitoring international migration flows in Europe. Towards a statistical data base combining data from different sources
The paper reviews techniques developed in demography, geography and statistics that are useful for bridging the gap between available data on international migration flows and the information required for policy making and research. The basic idea of the paper is as follows: to establish a coherent and consistent data base that contains sufficiently detailed, up-to-date and accurate information, data from several sources should be combined. That raises issues of definition and measurement, and of how to combine data from different origins properly. The issues may be tackled more easily if the statistics that are being compiled are viewed as different outcomes or manifestations of underlying stochastic processes governing migration. The link between the processes and their outcomes is described by models, the parameters of which must be estimated from the available data. That may be done within the context of socio-demographic accounting. The paper discusses the experience of the U.S. Bureau of the Census in combining migration data from several sources. It also summarizes the many efforts in Europe to establish a coherent and consistent data base on international migration.
The paper was written at IIASA. It is part of the Migration Estimation Study, which is a collaborative IIASA-University of Groningen project, funded by the Netherlands Organization for Scientific Research (NWO). The project aims at developing techniques to obtain improved estimates of international migration flows by country of origin and country of destination
Political and social determinants of life expectancy in less developed countries: a longitudinal study
<p>Abstract</p> <p>Background</p> <p>This study aimed to examine the longitudinal contributions of four political and socioeconomic factors to the increase in life expectancy in less developed countries (LDCs) between 1970 and 2004.</p> <p>Methods</p> <p>We collected 35 years of annual data for 119 LDCs on life expectancy at birth and on four key socioeconomic indicators: economy, measured by log10 gross domestic product per capita at purchasing power parity; educational environment, measured by the literacy rate of the adult population aged 15 years and over; nutritional status, measured by the proportion of undernourished people in the population; and political regime, measured by the regime score from the Polity IV database. Using linear mixed models, we analyzed the longitudinal effects of these multiple factors on life expectancy at birth with a lag of 0-10 years, adjusting for both time and regional correlations.</p> <p>Results</p> <p>The LDCs' increases in life expectancy over time were associated with all four factors. Political regime had the least influence on increased life expectancy to begin with, but became significant starting in the 3rd year and continued to increase, while the impact of the other socioeconomic factors began strong but continually decreased over time. The combined effects of these four socioeconomic and political determinants contributed 54.74% - 98.16% of the life expectancy gains throughout the lag periods of 0-10 years.</p> <p>Conclusions</p> <p>Though the effect of democratic politics on increasing life expectancy was relatively small in the short term when compared to the effects of the other socioeconomic factors, the long-term impact of democracy should not be underestimated.</p
New Directions in the Development of Population Estimates in the United States?
The advent of a continuously updated Master Area File (MAF) following the 2000 census represents an information resource that can be tapped for purposes of developing timely, cost-effective, and precise population estimates for even the smallest of geographical units (e.g., census blocks). We argue that the MAF can be enhanced (EMAF) for these purposes. In support of our argument we describe a set of activities needed to develop EMAF, each of which is well within the current capabilities of the U.S. Census Bureau and discuss various costs and benefits of each. We also describe how EMAF would provide population estimates containing a wide range of demographic (e.g., age, race, and sex) and socio-economic characteristics (e.g., educational attainment, income, and employment). As such, it could largely negate and eliminate the need for many of the traditional demographic methods of population estimation and possibly reduce the number of sample surveys. We identify important challenges that must be surmounted in order to realize EMAF and make suggestions for doing so. We conclude by noting that the idea of the EMAF could be of interest to other countries with MAF files and strong administrative records systems that, like the United States, are facing the challenge of producing good population information in the face of increasing census costs
Wealthiest is Not Always Healthiest: What Explains Differences in Child Mortality in West Africa?
- …