Momentum harvesting techniques for solar system travel

Astronomers are lately estimating there are 400,000 Earth visiting asteroids larger than 100 meters in diameter. These asteroids are accessible sources of building materials, propellants, oxygen, water, and minerals which also constitute a huge momentum reserve, potentially usable for travel throughout the solar system. To use this momentum, these stealthy objects must be tracked and the extraction of the momentum wanted must be learned. Momentum harvesting by momentum transfer from asteroid to spacecraft, and by using the momentum of the extraterrestrial material to help deliver itself to the destination are discussed. A net and tether concept is the suggested means of asteroid capture, the basic momentum exchange process. The energy damping characteristics of the tether will determine the velocity mismatch that can be tolerated, and hence the amount of momentum that can be harvested per capture. As it plays out of its reel, drag on the tether steadily accelerates the spacecraft. A variety of concepts for riding and using the asteroid after capture are discussed. The hitchhiker uses momentum transfer only. The beachcomber, the caveman, the swinger, the prospector, and the rock wrecker also take advantage of raw asteroidal materials. The chemist and the hijacker go further, they process the asteroid into propellant. Or, an 'asteroid railway system' could evolve with each hijacked asteroid becoming a scheduled train. Travelers could board the space railway system assured that water, oxygen, and propellants await them

Management of reliability and maintainability; a disciplined approach to fleet readiness

Material acquisition fundamentals were reviewed and include: mission profile definition, stress analysis, derating criteria, circuit reliability, failure modes, and worst case analysis. Military system reliability was examined with emphasis on the sparing of equipment. The Navy's organizational strategy for 1980 is presented

An attentional control task reduces intrusive thoughts about smoking.

INTRODUCTION: Attentional control tasks such as body scanning and following isometric exercise instructions have been shown to reduce smoking cravings, apparently by reducing stress (Ussher, M., Cropley, M., Playle, S., Mohidin, R., & West, R. [2009]. Effect of isometric exercise and body scanning on cigarette cravings and withdrawal symptoms. Addiction, 104, 1251-1257. doi:10.1111/j.1360-0443.2009.02605.x). Related work based upon elaborated intrusion theory (Kavanagh, D. J., Andrade, J., & May, J. [2005]. Imaginary relish and exquisite torture: The elaborated intrusion theory of desire. Psychological Review, 112, 446-467. doi:10.1037/0033-295X.112.2.446) has shown that similar tasks can reduce hungry participants' involuntary food-related thoughts (May, J., Andrade, J., Batey, H., Berry, L.-M., & Kavanagh, D. [2010]. Less food for thought: Impact of attentional instructions on intrusive thoughts about snack foods. Appetite, 55, 279-287. doi:10.1016/j.appet.2010.06.014). This study tests the effect of body scanning instructions upon smoking-related thoughts as well as craving. METHODS: Twenty-seven smokers took part in 2 counterbalanced sessions, on different days, having been asked to abstain from smoking for 2 hr. In each session, they followed audio instructions for three 10-min blocks during which their thoughts were probed 10 times. In the first and third blocks, they were instructed to let their mind wander; during the second block of the control session, they also let their mind wander, but in the experimental session, they followed body scanning instructions. "Smoking thought frequency" was assessed using thought probes; "Craving" was measured using Factor 1 of the Questionnaire on Smoking Urges (Tiffany, S. T., & Drobes, D. J. [1991]. The development and initial validation of a questionnaire on smoking urges. British Journal of Addiction, 86, 1467-1476. doi:10.1111/j.1360-0443.1991.tb01732.x). RESULTS: Participants reported fewer smoking-related thoughts and lower smoking cravings in the body scanning block of the experimental session, whereas they rose in the comparable mind-wandering block of the control session. The reduction in thoughts during the body scanning correlated with the corresponding reduction in craving. CONCLUSIONS: Body scanning reduces cravings and reduces the frequency or shortens the duration of smoking thoughts. Attentional control strategies may form a useful part of smoking cessation practices

A new technology for manufacturing scheduling derived from space system operations

A new technology for producing finite capacity schedules has been developed in response to complex requirements for operating space systems such as the Space Shuttle, the Space Station, and the Deep Space Network for telecommunications. This technology has proven its effectiveness in manufacturing environments where popular scheduling techniques associated with Materials Resources Planning (MRPII) and with factory simulation are not adequate for shop-floor work planning and control. The technology has three components. The first is a set of data structures that accommodate an extremely general description of a factory's resources, its manufacturing activities, and the constraints imposed by the environment. The second component is a language and set of software utilities that enable a rapid synthesis of functional capabilities. The third component is an algorithmic architecture called the Five Ruleset Model which accommodates the unique needs of each factory. Using the new technology, systems can model activities that generate, consume, and/or obligate resources. This allows work-in-process (WIP) to be generated and used; it permits constraints to be imposed or intermediate as well as finished goods inventories. It is also possible to match as closely as possible both the current factory state and future conditions such as promise dates. Schedule revisions can be accommodated without impacting the entire production schedule. Applications have been successful in both discrete and process manufacturing environments. The availability of a high-quality finite capacity production planning capability enhances the data management capabilities of MRP II systems. These schedules can be integrated with shop-floor data collection systems and accounting systems. Using the new technology, semi-custom systems can be developed at costs that are comparable to products that do not have equivalent functional capabilities and/or extensibility

Interventions by the Roman Republic in Illyria 230 – 167 BC

This thesis aims to determine how and why Rome undertook a series of interventions in Illyria during the period of 230 – 167 BC. The thesis is based on a detailed examination and consideration of the ancient written sources and the subsequent historiography on the subject. The Roman interventions in Illyria during this period have traditionally been treated as a component of wider studies of Roman expansion, although Rome’s involvement in Illyria has recently been examined by Dzino in his 2010 work Illyricum in Roman Politics 229BC-AD68. This work examined the development and integration of Illyricum in Roman political discourse, in which the Roman interventions were a smaller component in the broader study. A study of the Roman interventions in Illyria during the period of 230 – 167 BC has never previously been treated on this scale, nor effectively with a synthesis of the various approaches and pieces of evidence that are now available. Over the past decade, marine archaeology has been conducted in the Adriatic and the initial reports have recently been published which provide greater contextual insight on the geopolitical situation in Illyria. Additional new approaches to the subject from the faculty of international relations have emerged, although these have proven as problematic as they have been insightful. This thesis shall examine the new evidence and assess the latest approaches to provide the necessary context for considering the Roman interventions in Illyria. This context shall be initially considered to enable the thesis to progress to consider and analyse each Roman intervention in turn. By effectively grounding the thesis in the geopolitical context, the disparate nature of the communities that made up Illyria can be better understood. This thesis will use the material evidence available in conjunction with the written accounts of ancient historians to consider the implications of the Roman interventions and the underlying motivations for Rome in securing the Adriatic and developing their involvement in Illyria and the Greek East beyond

Some preliminary results of the fine structure profiles of radio refractivity near the surface at Ota, Southwest Nigeria

Some preliminary results are presented of the fine structure profiles of surface radio refractivity, Ns, over Ota, Southwest Nigeria (6° 42'N, 3° 14'E) computed from in-situ, one minute interval measurements of surface pressure, temperature and relative humidity. A wireless Davis Vantage Pro2 Weather Station instrument installed at the Department of Physics, Covenant University, Ota in April 2012, was used to obtain the measured variables. Hourly, daily and monthly average values of surface water vapour density, dry, wet and total radio refractivity were obtained for the months of April 2012 to March 2013. The distance to the radio horizon for a given transmitter height may be deduced from the observation that Ns is well correlated with the gradient of refractivity over the first kilometer above ground. Refractivity gradients utilized for the work were those obtained in a previous work for Oshodi, a meteorological weather station near the coast and close to Ota

Man-machine interface analysis of the flight design system

The objective of the current effort was to perform a broad analysis of the human factors issues involved in the design of the Flight Design System (FDS). The analysis was intended to include characteristics of the system itself, such as: (1) basic structure and functional capabilities of FDS; (2) user backgrounds, capabilities, and possible modes of use; (3) FDS interactive dialogue, problem solving aids; (4) system data management capabilities; and to include, as well, such system related matters as: (1) flight design team structure; (2) roles of technicians; (3) user training; and (4) methods of evaluating system performance. Wherever possible, specific recommendations are made. In other cases, the issues which seem most important are identified. In some cases, additional analyses or experiments which might provide resolution are suggested

Technology requirements for an orbiting fuel depot: A necessary element of a space infrastructure

Advanced planning within NASA has identified several bold space exploration initiatives. The successful implementation of these missions will require a supporting space infrastructure which would include a fuel depot, an orbiting facility to store, transfer and process large quantities of cryogenic fluids. In order to adequately plan the technology development programs required to enable the construction and operation of a fuel depot, a multidisciplinary workshop was convened to assess critical technologies and their state of maturity. Since technology requirements depend strongly on the depot design assumptions, several depot concepts are presented with their effect on criticality ratings. Over 70 depot-related technology areas are addressed

Integrating Item Accuracy and Reaction Time to Improve the Measurement of Inhibitory Control Abilities in Early Childhood

Efforts to improve children’s executive function are often hampered by the lack of measures that are optimized for use during the transition from preschool to elementary school. Whereas preschool-based measures often emphasize response accuracy, elementary school-based measures emphasize reaction time (RT)—especially for measures inhibitory control (IC) tasks that typically have a speeded component. The primary objective of this study was to test in a preschool-aged sample whether the joint use of item-level accuracy and RT data resulted in improved scoring for three IC tasks relative to scores derived from accuracy data alone. Generally, the joint use of item-level accuracy and RT data resulted in modest improvements in the measurement precision of IC abilities. Moreover, the joint use of item-level accuracy and RT helped eliminate floor and ceiling effects that occurred when accuracy data were considered alone. Results are discussed with respect to the importance of scoring IC tasks in ways that are maximally informative for program evaluation and longitudinal modeling