4,049 research outputs found
Steady, barotropic wind and boundary-driven circulation on a polar plane
Steady, linear, barotropic wind and boundary forced circulation solutions in the presence of linear bottom friction are analytically derived in a circular basin of uniform depth on a polar tangent plane in which only first order effects of the Earthâs curvature are retained. Approximate solutions are constructed by using the well known method of aggregating the interior inviscid Sverdrup balance solution and the frictional wall boundary layer solution. In contrast to the width of mid-latitude frictional western boundary layers that scale as , the width of the polar frictional boundary layer adjacent to the basin wall is wider, scaling as , where is the bottom friction coefficient, is the coriolis parameter. Solutions are presented for a variety of wind stress curl distributions and for a prescribed inflow/outflow representative of the exchange of water masses between the Arctic and Atlantic basins. Boundary forced solutions are also derived in a basin with a uniform width step shelf. For this basin geometry the flow is mainly confined to the shelf, although a parameter regime is identified that supports significant flow in the deep basin
Competitive swimmers modify racing start depth upon request
To expand upon recent findings showing that competitive swimmers complete significantly shallower racing starts in shallower pools, 12 more experienced and 13 less experienced swimmers were filmed underwater during completion of competitive starts. Two starts (1 routine and 1 ârequested shallowâ) were executed from a 0.76 m block height into water 3.66 m deep. Dependent measures were
maximum head depth, head speed at maximum head depth, and distance from the starting wall at maximum head depth. Statistical analyses yielded significant main effects (p < 0.05) for both start type and swimmer experience. Starts executed by the more experienced swimmers were deeper and faster than those executed by the less experienced swimmers. When asked to dive shallowly, maximum head depth
decreased (0.19 m) and head speed increased (0.33 ms-1) regardless of experience. The ability of all swimmers to modify start depth implies that spinal cord injuries
during competitive swimming starts are not necessarily due to an inherent inability to control the depth of the start
Block height influences the head depth of competitive racing starts
The purpose of this study was to determine whether or not starting block height has an effect on the head depth and head speed of competitive racing starts. Eleven experienced, collegiate swimmers executed competitive racing starts from three different starting heights: 0.21 m (pool deck), 0.46 m (intermediate block), and 0.76 m (standard block). One-way repeated measures ANOVA indicated that starting height had a significant effect on the maximum depth of the center of the head, head speed at maximum head depth, and distance from starting wall at maximum head depth. Racing starts from the standard block and pool deck were significantly deeper, faster, and farther at maximum head depth than starts from the intermediate block. There were no differences between depth, speed, or distance between the standard block and pool deck. We conclude that there is not a positive linear
relationship between starting depth and starting height, which means that starts do not necessarily get deeper as the starting height increases
Racing start safety: head depth and head speed during competitive backstroke starts
Research on competitive swim start safety has focused on starts involving a dive from above the water surface. The purpose of this study was to determine the depths, speeds, and distances attained when executing backstroke starts, which begin in the water, and to investigate whether or not these variables are a function of age. Backstroke starts (n = 122) performed in 1.22 m of water during competition were stratified according to age group (8&U, 9-10, 11-12, 13-14, and 15&O). Dependent measures were maximum depth of the center of the head (MHD), head speed at maximum head depth (SPD), and distance from the wall at maximum head depth (DIST). Main effects were shown for age group for MHD (F = 8.86, p < 0.05), SPD (F = 4.64, p < 0.05), and DIST (F = 17.21, p < 0.05). Because they performed starts that were deeper and faster than the younger swimmers, the older swimmers seem to be at a greater risk for injury when performing backstroke starts in shallow water
Racing start safety: head depth and head speed during competitive starts into a water depth of 1.22 m
From the perspective of swimmer safety, there have been no quantitative 3-dimensional
studies of the underwater phase of racing starts during competition. To do
so, 471 starts were filmed during a meet with a starting depth of 1.22 m and block
height of 0.76 m. Starts were stratified according to age (8 & U, 9â10, 11â12,
13â14, and 15 & O) and stroke during the first lap (freestyle, breaststroke, and
butterfly). Dependent measures were maximum head depth, head speed at maximum
head depth, and distance from the wall at maximum head depth. For all
three variables, there were significant main effects for age, F(4, 456) = 12.53, p
< .001, F(4, 456) = 27.46, p < .001, and F(4, 456) = 54.71, p < .001, respectively,
and stroke, F(2, 456) = 16.91, p < .001, F(2, 456) = 8.45, p < .001, and F(2, 456)
= 18.15, p < .001, respectively. The older swimmers performed starts that were
deeper and faster than the younger swimmers and as a result, the older swimmers
may be at a greater risk for injury when performing starts in this pool depth
Water depth influences the head depth of competitive racing starts
Recent research suggests that swimmers perform deeper starts in deeper water (Blitvich, McElroy, Blanksby, Clothier, & Pearson, 2000; Cornett, White, Wright, Willmott, & Stager, 2011). To provide additional information relevant to the depth adjustments swimmers make as a function of water depth and the validity of values reported in prior literature, 11 collegiate swimmers were asked to execute racing starts in three water depths (1.53 m, 2.14 m, and 3.66 m). One-way repeated measures ANOVA revealed that the maximum depth of the center of the head was significantly deeper in 3.66 m as compared to the shallower water depths. No differences due to water depth were detected in head speed at maximum head depth or in the distance from the wall at which maximum head depth occurred. We concluded that swimmers can and do make head depth adjustments as a function of water depth. Earlier research performed in deep water may provide overestimates of maximum head depth following the execution of a racing start in water depth typical of competitive venues
Start depth modification by adolescent competitive swimmers
To expand upon previous studies showing inexperienced high school swimmers can complete significantly shallower racing starts when asked to start âshallow,â 42 age group swimmers (6-14 years old) were filmed underwater during completion of competitive starts. Two starts (one normal and one ârequested shallowâ) were executed from a 0.76 m block into 1.83 m of water. Dependent measures were maximum depth of the center of the head, head speed at maximum head depth, and distance from the starting wall at maximum head depth. Statistical analyses yielded significant main effects (p < 0.05) for start type and age. The oldest swimmersâ starts were deeper and faster than the youngest swimmersâ starts. When asked to start shallowly, maximum head depth decreased (0.10 m) and head speed increased (0.32 ms-1) regardless of age group. The ability of all age groups to modify start depth implies that spinal cord injuries during competitive swimming starts are not necessarily due to age-related deficits in basic motor skills
Racing start safety: head depth and head speed during competitive swim starts into a water depth of 2.29m
The head depths and head speeds of swimmers attained following the execution of racing starts during competition have not been well described. To address this, 211 competitive starts were filmed into a starting depth of 2.29 m with a block height of 0.76 m. Starts were stratified according to age, sex, stroke, and swim meet. Dependent measures were maximum depth of the center of the head, head speed at maximum head depth, and distance from the wall at maximum head depth. Significant main effects existed for age for all three measures: F(1, 106) = 13.33, p
< .001, F(1, 106) = 18.60, p < .001 and F(1, 106) = 70.59, p < .001, respectively. There was a significant age by sex interaction, F(1, 106) = 5.36, p = 0.023, for head speed. In conclusion, older swimmers performed starts that were deeper and faster than younger swimmers and nearly all starts exceeded the threshold speeds for injury. As compared to starts previously reported into 1.22 m, starts
were deeper, slower, and farther from the starting wall at maximum head depth
The PiSpec: A Low-Cost, 3D-Printed Spectrometer for Measuring Volcanic SO2 Emission Rates
Spectroscopy has been used to quantify volcanic gas emission rates, most commonly SO2, for a number of decades. Typically, commercial spectrometers costing 1000s USD are employed for this purpose. The PiSpec is a new, custom-designed, 3D-printed spectrometer based on smartphone sensor technology. This unit has â1 nm spectral resolution and a spectral range in the ultraviolet of â280â340 nm, and is specifically configured for the remote sensing of SO2 using Differential Optical Absorption Spectroscopy (DOAS). Here we report on the first field deployment of the PiSpec on a volcano, to demonstrate the proof of concept of the deviceâs functionality in this application area. The study was performed on Masaya Volcano, Nicaragua, which is one of the largest emitters of SO2 on the planet, during a period of elevated activity where a lava lake was present in the crater. Both scans and traverses were performed, with resulting emission rates ranging from 3.2 to 45.6 kg sâ1 across two measurement days; these values are commensurate with those reported elsewhere in the literature during this activity phase (Aiuppa et al., 2018; Stix et al., 2018). Furthermore, we tested the PiSpecâs thermal stability, finding a wavelength shift of 0.046 nm/âC between 2.5 and 45âC, which is very similar to that of some commercial spectrometers. Given the low build cost of these units (â500 USD for a one-off build, with prospects for further price reduction with volume manufacture), we suggest these units hold considerable potential for volcano monitoring operations in resource limited environments
The electronic structure of LaSrMnO thin films and its dependence as studied by angle-resolved photoemission
We present angle-resolved photoemission spectroscopy results for thin films
of the three-dimensional manganese perovskite LaSrMnO. We
show that the transition temperature () from the paramagnetic insulating
to ferromagnetic metallic state is closely related to details of the electronic
structure, particularly to the spectral weight at the -point, where
the sharpest step at the Fermi level was observed. We found that this -point is the same for all the samples, despite their different . The
change of is discussed in terms of kinetic energy optimization. Our ARPES
results suggest that the change of the electronic structure for the samples
having different transition temperatures is different from the rigid band
shift.Comment: Accepted by Journal of Physics: Condensed Matte
- âŠ