2,187 research outputs found
Experimental Tests of General Relativity
Einstein's general theory of relativity is the standard theory of gravity,
especially where the needs of astronomy, astrophysics, cosmology and
fundamental physics are concerned. As such, this theory is used for many
practical purposes involving spacecraft navigation, geodesy, and time transfer.
Here I review the foundations of general relativity, discuss recent progress in
the tests of relativistic gravity in the solar system, and present motivations
for the new generation of high-accuracy gravitational experiments. I discuss
the advances in our understanding of fundamental physics that are anticipated
in the near future and evaluate the discovery potential of the recently
proposed gravitational experiments.Comment: revtex4, 30 pages, 10 figure
Fabrication-tolerant active-passive integration scheme for vertically-coupled microring resonators
The large-scale photonic integration of microring resonators in three dimensions made possible by recent developments in vertical coupling and wafer bonding technology is shown to be sensitive to lateral mask misalignment for the ring and bus waveguides introduced during the fabrication process. For a typical 20-”m radius, vertically coupled microring calculations reveal a linear relationship between deviation in the coupling coefficient and lateral misalignment. A coupling coefficient reduction of 50% is predicted for a lateral misalignment of 0.3 ”m, which is typical for an alignment accuracy limited by the current state-of-the-art mask alignment process. The use of a wide multimode bus waveguide is proposed to ameliorate this alignment sensitivity. The mode-expanded bus waveguide, together with its physically wider structure, reduces the dependence of modal overlap and coupling length on precise alignment, resulting in significantly relaxed fabrication tolerance. Deviation of coupling coefficient decreases by an order of magnitude for the new ring coupler geometry, where a sole reduction of 5% is obtained for the same amount of misalignment. The implications of the proposed structure are subsequently investigated for microring laser performance. The differential slope efficiency is shown to be at least five times less sensitive to lateral misalignment for the proposed structure within a small misalignment regime. This readily adaptable coupler geometry based on existing vertical coupling architectures is transferable to any fabrication scheme with multiple waveguide layers coupled vertically, and is of particular importance to microring resonators with small radii
Inkjet printing infiltration of Ni-Gd:CeO2 anodes for low temperature solid oxide fuel cells.
ABSTRACT: The effect of inkjet printing infiltration of Gd0.1Ce0.9O2-x in NiO-Gd0.1Ce0.9O2-x anodes on the performance of symmetrical and button cells was investigated. The anodes were fabricated by inkjet printing of suspension and sol inks. Symmetrical cells were produced from composite suspension inks on Gd0.1Ce0.9O2-x electrolyte. As-prepared scaffolds were infiltrated with Gd0.1Ce0.9O2 ink. Increasing the number of infiltration steps led to formation of "nano-decoration" on pre-sintered anodes. High resolution SEM analysis was employed for micro-structural characterization revealing formation of fine anode sub-structure with nanoparticle size varying in the range of 50-200 nm. EIS tests were conducted on symmetrical cells in 4% hydrogen/argon gas flow. The measurements showed substantial reduction of the activation polarization as a function of the number of infiltrations. The effect was assigned to the extension of the triple phase boundary. The i-V testing of a reference (NiO-8 mol% Y2O3 stabilized ZrO2/NiO-Gd0.1Ce0.9O2-x /Gd0.1Ce0.9O2-x /Gd0.1Ce0.9O2-x -La0.6Sr0.4Co0.2Fe0.8O3-Ύ ) cell and an identical cell with infiltrated anode revealed ~2.5 times improvement in the maximum output power at 600 °C which corresponded with the reduction of the polarization resistance of the symmetrical cells at the same temperature (2.8 times). This study demonstrated the potential of inkjet printing technology as an infiltration tool for cost effective commercial SOFC processing
Recommended from our members
Performance optimization of LSCF/Gd:CeO composite cathodes via single-step inkjet printing infltration
The effect of solid oxide fuel cell cathode microstructure modification on its electrochemical activity is investigated. Inkjet printing infiltration was used to develop a nano-decoration pattern on the composite cathode scaffolds. Two types of composite LaSrCoFeO:CeGdO cathodes with different volume ratios (60:40 and 40:60 vol%) were fabricated using inkjet printing of suspension inks. The electrodes were altered by single-step inkjet printing infiltration of ethanol-based CeGdO ink. After heat treatments in air at 550 °C the cathodesâ surfaces were shown to be nano-decorated with CeGdO particles (~20â120 nm in size) dispersed uniformly onto the electrode scaffold. The nano-engineered microstructure enhanced the active triple phase boundary of the electrode and promoted the surface exchange reaction of oxygen. Electrochemical impedance tests conducted on symmetrical cells showed a reduction in the polarization resistance of between 1.3 and 2.9 times. The effect was found to be more pronounced in the 60:40 vol% composite cathodes. Ageing of infiltrated electrodes up to 60 h in air revealed enhanced stability of gadolinium doped ceria nanoparticles decorated electrodes ascribed to the suppression of SrO surface segregation. This work demonstrated that single-step inkjet printing infiltration can produce reproducible performance enhancements and thus offers a cost-effective route for commercial solid oxide fuel cell infiltration processing.The authors wish to acknowledge EPSRC GrantââTailoring of microstructural evolution in impregnated SOFC electrodesâ âfor the financial support
Information-Derived Mechanistic Hypotheses for Structural Cardiotoxicity
Adverse events resulting from drug therapy can be a cause of drug withdrawal, reduced and or restricted clinical use, as well as a major economic burden for society. To increase the safety of new drugs, there is a need to better understand the mechanisms causing the adverse events. One way to derive new mechanistic hypotheses is by linking data on drug adverse events with the drugsâ biological targets. In this study, we have used data mining techniques and mutual information statistical approaches to find associations between reported adverse events collected from the FDA Adverse Event Reporting System and assay outcomes from ToxCast, with the aim to generate mechanistic hypotheses related to structural cardiotoxicity (morphological damage to cardiomyocytes and/or loss of viability). Our workflow identified 22 adverse event-assay outcome associations. From these associations, 10 implicated targets could be substantiated with evidence from previous studies reported in the literature. For two of the identified targets, we also describe a more detailed mechanism, forming putative adverse outcome pathways associated with structural cardiotoxicity. Our study also highlights the difficulties deriving these type of associations from the very limited amount of data available
Quantum interference and Klein tunneling in graphene heterojunctions
The observation of quantum conductance oscillations in mesoscopic systems has
traditionally required the confinement of the carriers to a phase space of
reduced dimensionality. While electron optics such as lensing and focusing have
been demonstrated experimentally, building a collimated electron interferometer
in two unconfined dimensions has remained a challenge due to the difficulty of
creating electrostatic barriers that are sharp on the order of the electron
wavelength. Here, we report the observation of conductance oscillations in
extremely narrow graphene heterostructures where a resonant cavity is formed
between two electrostatically created bipolar junctions. Analysis of the
oscillations confirms that p-n junctions have a collimating effect on
ballistically transmitted carriers. The phase shift observed in the conductance
fringes at low magnetic fields is a signature of the perfect transmission of
carriers normally incident on the junctions and thus constitutes a direct
experimental observation of ``Klein Tunneling.''Comment: 13 pages and 6 figures including supplementary information. The paper
has been modified in light of new theoretical results available at
arXiv:0808.048
Vertically-Coupled Microring Laser Array for Dual-Wavelength Generation
We report the first demonstration of continuous-wave operation of a tunable, compact microring laser array based on a vertical-coupling architecture, well suited to larger-scale integration. Wavelength separation tunability from 4.9 to 6.3nm is observed
Higgs Interference Effects in \Pg \Pg \to \PZ\PZ and their Uncertainty
Interference between the Standard Model Higgs boson and continuum
contributions is considered in the heavy-mass scenario. Results are available
at leading order for the background. It is discussed how to combine the result
with the next-to-next-to-leading order Higgs production cross-section and a
proposal for estimating the associated theoretical uncertainty is presented.Comment: 25 pages, 10 figures; improved numerical accuracy, Numerics updated,
conclusions unchanged, references added. v
The ineluctable requirement for the trans-iron elements molybdenum and/or tungsten in the origin of life
An evolutionary tree of key enzymes from the Complex-Iron-Sulfur-Molybdoenzyme (CISM) superfamily distinguishes âancientâ members, i.e. enzymes present already in the last universal common ancestor (LUCA) of prokaryotes, from more recently evolved subfamilies. The majority of the presented subfamilies and, as a consequence, the Molybdo-enzyme superfamily as a whole, appear to have existed in LUCA. The results are discussed with respect to the nature of bioenergetic substrates available to early life and to problems arising from the low solubility of molybdenum under conditions of the primordial Earth
- âŠ