Acute and Chronic Toxicity of Soluble Fractions of Industrial Solid Wastes on Daphnia magna and Vibrio fischeri

Industrial wastes may produce leachates that can contaminate the aquatic ecosystem. Toxicity testing in acute and chronic levels is essential to assess environmental risks from the soluble fractions of these wastes, since only chemical analysis may not be adequate to classify the hazard of an industrial waste. In this study, ten samples of solid wastes from textile, metal-mechanic, and pulp and paper industries were analyzed by acute and chronic toxicity tests with Daphnia magna and Vibrio fischeri. A metal-mechanic waste (sample MM3) induced the highest toxicity level to Daphnia magna(CE50,48 h = 2.21%). A textile waste induced the highest toxicity level to Vibrio fischeri (sample TX2, CE50,30 min = 12.08%). All samples of pulp and paper wastes, and a textile waste (sample TX2) induced chronic effects on reproduction, length, and longevity of Daphnia magna. These results could serve as an alert about the environmental risks of an inadequate waste classification method

Acute toxicity of copper and chromium oxide nanoparticles to Daphnia similis

Copper oxide nanoparticles (CuO NPs) are employed in antifouling paints, and chromium oxide nanoparticles (Cr2O3 NPs) have been used as a green pigment. Their extensive use can contaminate aquatic ecosystems, and the toxicological effects of these NPs to the biota are poorly known. In this study, we evaluated the acute toxicity induced by CuO and Cr2O3 NPs, comparing with CuSO4 and Cr(NO3)3 as Cu2+ and Cr3+ ion source, respectively, using the microcrustacean Daphnia similis. The mean EC50-48h for CuO NPs was 0.064 mg L-1 and for CuSO4 was 0.015 mg L-1. CuO NPs tend to agglomerate, which may have reduced the release of Cu2+ in the test medium in relation to CuSO4.The mean EC50-48h for Cr2O3 NPs was 6.74 mg L-1 and for Cr(NO3)3 was 11.98 mg L-1. The reduced size of the Cr2O3 NPs (15-30 nm) and the higher zeta potential may have contributed to the higher stability in suspension and less potential for agglomeration, partially explaining the higher toxicity of NPs in relation to Cr(NO3)3. After the tests, we observed morphological damages such as increase in fat droplets, internal organ exposure and partially disintegration in organisms exposed to all tested substances, NPs or the salts

Impact of COVID-19 on cardiovascular testing in the United States versus the rest of the world

Objectives: This study sought to quantify and compare the decline in volumes of cardiovascular procedures between the United States and non-US institutions during the early phase of the coronavirus disease-2019 (COVID-19) pandemic. Background: The COVID-19 pandemic has disrupted the care of many non-COVID-19 illnesses. Reductions in diagnostic cardiovascular testing around the world have led to concerns over the implications of reduced testing for cardiovascular disease (CVD) morbidity and mortality. Methods: Data were submitted to the INCAPS-COVID (International Atomic Energy Agency Non-Invasive Cardiology Protocols Study of COVID-19), a multinational registry comprising 909 institutions in 108 countries (including 155 facilities in 40 U.S. states), assessing the impact of the COVID-19 pandemic on volumes of diagnostic cardiovascular procedures. Data were obtained for April 2020 and compared with volumes of baseline procedures from March 2019. We compared laboratory characteristics, practices, and procedure volumes between U.S. and non-U.S. facilities and between U.S. geographic regions and identified factors associated with volume reduction in the United States. Results: Reductions in the volumes of procedures in the United States were similar to those in non-U.S. facilities (68% vs. 63%, respectively; p = 0.237), although U.S. facilities reported greater reductions in invasive coronary angiography (69% vs. 53%, respectively; p < 0.001). Significantly more U.S. facilities reported increased use of telehealth and patient screening measures than non-U.S. facilities, such as temperature checks, symptom screenings, and COVID-19 testing. Reductions in volumes of procedures differed between U.S. regions, with larger declines observed in the Northeast (76%) and Midwest (74%) than in the South (62%) and West (44%). Prevalence of COVID-19, staff redeployments, outpatient centers, and urban centers were associated with greater reductions in volume in U.S. facilities in a multivariable analysis. Conclusions: We observed marked reductions in U.S. cardiovascular testing in the early phase of the pandemic and significant variability between U.S. regions. The association between reductions of volumes and COVID-19 prevalence in the United States highlighted the need for proactive efforts to maintain access to cardiovascular testing in areas most affected by outbreaks of COVID-19 infection

Membrane adsorption with polyacrylonitrile prepared with superfine powder-activated carbon, case study: separation process applied in water treatment containing diclofenac

Polyacrylonitrile membranes (PAN) have high stability against chemical agents, making them suitable for a wide range of applications as such Ultrafiltration processes. Ultrafiltration membranes composed of PAN/Superfine powder activated carbon (S-PAC) mixtures can be a good research route, aiming the development of a new separation processes for water treatment. The association of materials to form a single product can have technological and economic advantages in separation processes. In this study, S-PAC impregnated into PAN membranes were prepared, characterized and used, as a case study, to remove diclofenac (DCF) from water. The membranes (PAN/S-PAC) were synthesized with different concentrations of S-PAC (0.2, 0.6, 1.0, 3.0 and 5.0 wt%) by a phase inversion process. The results of the TEM characterizations of the S-PAC indicated the presence of micro and nanoparticles (∼10 nm) and tending to form micrometric clusters. The infrared spectra of the membranes were characteristic of PAN; however, vibrational bands attributed to the S-PAC spectrum were also observed, which indicated an interaction between the materials. The case study showed an increase in the water flux and in the DCF rejection efficiency, for composite membranes (PAN/S-PAC) with higher concentration of S-PAC. The results of static adsorption tests indicated that the mechanism of DCF rejection occurred predominantly by adsorption. There were indications that the PAN/S-PAC membranes formed a composite material and the PAN/S-PAC (3.0) presented the best study composition given the results. Although the research is in its initial phase, the results indicated that the composition can improve many water treatment systems

Membrane adsorption with polyacrylonitrile prepared with superfine powder-activated carbon, case study: separation process applied in water treatment containing diclofenac

Polyacrylonitrile membranes (PAN) have high stability against chemical agents, making them suitable for a wide range of applications as such Ultrafiltration processes. Ultrafiltration membranes composed of PAN/Superfine powder activated carbon (S-PAC) mixtures can be a good research route, aiming the development of a new separation processes for water treatment. The association of materials to form a single product can have technological and economic advantages in separation processes. In this study, S-PAC impregnated into PAN membranes were prepared, characterized and used, as a case study, to remove diclofenac (DCF) from water. The membranes (PAN/S-PAC) were synthesized with different concentrations of S-PAC (0.2, 0.6, 1.0, 3.0 and 5.0 wt%) by a phase inversion process. The results of the TEM characterizations of the S-PAC indicated the presence of micro and nanoparticles (∼10 nm) and tending to form micrometric clusters. The infrared spectra of the membranes were characteristic of PAN; however, vibrational bands attributed to the S-PAC spectrum were also observed, which indicated an interaction between the materials. The case study showed an increase in the water flux and in the DCF rejection efficiency, for composite membranes (PAN/S-PAC) with higher concentration of S-PAC. The results of static adsorption tests indicated that the mechanism of DCF rejection occurred predominantly by adsorption. There were indications that the PAN/S-PAC membranes formed a composite material and the PAN/S-PAC (3.0) presented the best study composition given the results. Although the research is in its initial phase, the results indicated that the composition can improve many water treatment systems

Acute toxicity evaluation of cutting fluids used in manufacturing processes to Poecilia reticulata and Daphnia magna

Grinding operations are very significant among the manufacturing processes of the metal-mechanic industry. In conventional grinding, cutting fluids are of great concern for improving productivity, but also for being hazardous to the environment. In order to contribute to the knowledge of the actual toxic effects of these products in aquatic environments, the present work assesses the toxicity potential through acute toxicity tests of three different kinds of cutting fluids, with three different usage times. The tests were carried out using the fish Poecilia reticulate and the microcrustacean Daphnia magna as test organisms. These tests made it possible to determine the Median Lethal Concentration (LC50) for the fish and the Median Effective Concentration (EC50) for the microcrustacean. The results indicate that, after storage, the toxicity potential of cutting fluids decreases. However, in the three situations investigated, the product presented a high toxicity potential, which reinforces the need of special care in its handling, usage and disposal

Membrane adsorption with polyacrylonitrile prepared with superfine powder activated carbon, case study: separation process applied in water treatment containing diclofenac

Polyacrylonitrile membranes (PAN) have high stability against chemical agents, making them suitable for a wide range of applications as such Ultrafiltration processes. Ultrafiltration membranes composed of PAN/Superfine powder activated carbon (S-PAC) mixtures can be a good research route, aiming the development of a new separation processes for water treatment. The association of materials to form a single product can have technological and economic advantages in separation processes. In this study, S-PAC impregnated into PAN membranes were prepared, characterized and used, as a case study, to remove diclofenac (DCF) from water. The membranes (PAN/S-PAC) were synthesized with different concentrations of S-PAC (0.2, 0.6, 1.0, 3.0 and 5.0 wt%) by a phase inversion process. The results of the TEM characterizations of the S-PAC indicated the presence of micro and nanoparticles (∼10 nm) and tending to form micrometric clusters. The infrared spectra of the membranes were characteristic of PAN; however, vibrational bands attributed to the S-PAC spectrum were also observed, which indicated an interaction between the materials. The case study showed an increase in the water flux and in the DCF rejection efficiency, for composite membranes (PAN/S-PAC) with higher concentration of S-PAC. The results of static adsorption tests indicated that the mechanism of DCF rejection occurred predominantly by adsorption. There were indications that the PAN/S-PAC membranes formed a composite material and the PAN/S-PAC (3.0) presented the best study composition given the results. Although the research is in its initial phase, the results indicated that the composition can improve many water treatment systems

Classification of solid industrial waste based on ecotoxicology tests using Daphnia magna: an alternative

The adequate treatment and final disposal of solid industrial wastes depends on their classification into class I or II. This classification is proposed by NBR 10.004; however, it is complex and time-consuming. With a view to facilitating this classification, the use of assays with Daphnia magna is proposed. These assays make possible the identification of toxic chemicals in the leach, which denotes the presence of one of the characteristics described by NBR 10.004, the toxicity, which is a sufficient argument to put the waste into class I. Ecotoxicological tests were carried out with ten samples of solid wastes of frequent production and, on the basis of the results from EC(I)50/48h of those samples in comparison with the official classification of NBR 10.004, limits were established for the classification of wastes into class I or II. A coincidence in the classification of 50% of the analyzed samples was observed. In cases in which there is no coherence between the methods, the method proposed in this work classifies the waste into class I. These data are preliminary, but they reveal that the classification system proposed here is promising because of its quickness and economic viability