Study of radiation hazards to man on extended near earth missions

Radiation hazards to man on extended near earth mission

Evaluation of nonmetallic thermal protection materials for the manned space shuttle. Volume 1, task 1: Assessment of technical risks associated with utilization of nonmetallic thermal protection system

Technical problems of design and flight qualification of the proposed classes of surface insulation materials and leading edge materials were reviewed. A screening test plan, a preliminary design data test plan and a design data test plan were outlined. This program defined the apparent critical differences between the surface insulators and the leading edge materials, structuring specialized screening test plans for each of these two classes of materials. Unique testing techniques were shown to be important in evaluating the structural interaction aspects of the surface insulators and a separate task was defined to validate the test plan. In addition, a compilation was made of available information on proposed material (including metallic TPS), previous shuttle programs, pertinent test procedures, and other national programs of merit. This material was collected and summarized in an informally structured workbook

The Planetary Nebula System and Dynamics in the Outer Halo of NGC 5128

The halos of elliptical galaxies are faint and difficult to explore, but they contain vital clues to both structure and formation. We present the results of an imaging and spectroscopic survey for planetary nebulae (PNe) in the nearby elliptical NGC 5128. We extend the work of Hui et al.(1995) well into the halo of the galaxy--out to distances of 100 and 50 kpc along the major and minor axes. We now know of 1141 PNe in NGC 5128, 780 of which are confirmed. Of these 780 PNe, 349 are new from this survey, and 148 are at radii beyond 20 kpc. PNe exist at distances up to 80 kpc (~15 r_e), showing that the stellar halo extends to the limit of our data. This study represents by far the largest kinematic study of an elliptical galaxy to date, both in the number of velocity tracers and in radial extent. We confirm the large rotation of the PNe along the major axis, and show that it extends in a disk-like feature into the halo. The rotation curve of the stars flattens at ~100 km/s with V/sigma between 1 and 1.5, and with the velocity dispersion of the PNe falling gradually at larger radii. The two-dimensional velocity field exhibits a zero-velocity contour with a pronounced twist, showing that the galaxy potential is likely triaxial in shape, tending toward prolate. The total dynamical mass of the galaxy within 80 kpc is ~5 x 10^{11} M_sun, with M/L_B ~ 13. This mass-to-light ratio is much lower than what is typically expected for elliptical galaxies.Comment: 21 pages, 13 figures (figures 3-8 best viewed in color), accepted for publication in the Astrophysical Journa

A multi-epoch VLBI survey of the kinematics of CFJ sources

Context. This is the second in a series of papers presenting VLBI observations of the 293 Caltech-Jodrell Bank Flat-spectrum (hereafter CJF) sources and their analysis. Aims. We obtain a consistent motion dataset large enough to allow the systematic properties of the population to be studied. Methods. We present detailed kinematic analysis of the complete flux-density limited CJF survey. We computed 2D kinematic models based on the optimal model-fitting parameters of multi-epoch VLBA observations. This allows us to calculate not only radial, but also orthogonal motions, and thus to study curvature and acceleration. Statistical tests of the motions measured and their reliability were performed. A correlation analysis between the derived apparent motions, luminosities, spectral indices, and core dominance and the resulting consequences is described. Results. With at least one velocity in each of the 237 sources, this sample is much larger than any available before, so it allows a meaningful statistical investigation of apparent motions and any possible correlations with other parameters in AGN jets. The main results to emerge are as follows: - In general motions are not consistent with a single uniform velocity applicable to all components along a jet. - We find a slight trend towards a positive outward acceleration and also adduce some evidence for greater acceleration in the innermost regions. - We find a lack of fast components at physical distances less than a few pc from the reference feature. - Only ~4% of the components from galaxies and <2% of those from quasars undergo large bends i.e. within 15° of ± 90°. - The distribution of radial velocities shows a broad distribution of velocities (apparent velocities up to 30 c). Fifteen percent of the best-sampled jet components exhibit low velocities that may need to be explained in a different manner to the fast motions. - Some negative superluminal motions are seen, and in 15 cases (6%) these are definitely significant. - We find a strong correlation between the 5 GHz luminosity and the apparent velocity. - The CJF galaxies, on average, show slower apparent jet-component velocities than the quasars. - The mean velocity in the VLBA 2 cm survey (Kellermann et al. 2004, ApJ, 609, 539) is substantially higher than in the CJF survey, the ratio could be roughly a factor of 1.5-2. This supports the observed trend toward increasing apparent velocity with increasing observing frequency. Conclusions. This AGN survey provides the basis for any statistical analysis of jet and jet-component properties

The properties of the gamma-ray blazars in the CJ-F VLBI sample

We present first results from the analysis of multi-epoch VLBI observations of the EGRET detected sources [9] in the CJ-F sample (Caltech Jodrell-Flat-spectrum, [10]). These objects form a subsample of 14 sources within the 293 AGN of the full CJ-F sample. 5 GHz VLBI snapshot observations of the CJ-F sources are continuously being performed in order to create a valid database for thorough statistical tests of pc-scale jet motion in AGN. All gamma-bright CJ-F AGN have been observed at least twice with the VLBA, which enables us to investigate jet component motions and paths. In particular, we concentrate on the analysis of those properties supposed to be essential for gamma-ray production, i.e., superluminal motion and bending. A paper discussing the possible relation between morphological changes and gamma-ray flaring/production is in preparation

A Determination of H_0 with the CLASS Gravitational Lens B1608+656: I. Time Delay Measurements with the VLA

We present the results of a program to monitor the four-image gravitational lens B1608+656 with the VLA. The system was observed over a seven month period from 1996 October to 1997 May. The 64 epochs of observation have an average spacing of 3.6~d. The light curves of the four images of the background source show that the flux density of the background source has varied at the ~5% level. We measure time delays in the system based on common features that are seen in all four light curves. The three independent time delays in the system are found to be Delta t_{BA} = 31 +/- 7~d, Delta t_{BC} = 36 +/- 7~d, and Delta t_{BD} = 76^{+9}_{-10}~d at 95% confidence. This is the first gravitational lens system for which three independent time delays have been measured. A companion paper presents a mass model for the lensing galaxy which correctly reproduces the observed image positions, flux density ratios, and time delay ratios. The last condition is crucial for determining H_0 with a four-image lens. We combine the time delays with the model to obtain a value for the Hubble constant of H_0 = 59^{+8}_{-7} km/s/Mpc at 95% confidence (statistical) for (Omega_M, Omega_{Lambda}) = (1,0). In addition, there is an estimated systematic uncertainty of +/- 15 km/s/Mpc from uncertainties in modeling the radial mass profiles of the lensing galaxies. The value of H_0 presented in this paper is comparable to recent measurements of H_0 from the gravitational lenses 0957+561, PG1115+080, B0218+357, and PKS1830-211.Comment: Accepted for publication in ApJ. 20 pages, 13 figure

Artificial dielectric optical structures: A challenge for nanofabrication

Diffractive optical components can be made using multiple level kinoforms or single level artificial dielectric structures. The latter require the fabrication of pillars of equal depth but differing width and spacing. As a demonstration device, the diffractive optic equivalent of a wedge has been made in GaAs for use at 1.15 μm. The need for all pillars to have the same height was met by using a selective etch and a very thin etch-stop layer on AlGaAs. The experimental diffraction efficiency was 87.8%, among the best ever obtained and close to the theoretical maximum of 97.6%. © 1998 American Vacuum Society