42 research outputs found
Correction: Preferential site substitution of Eu3+ ions in Ca10(PO4)6Cl2 nanoparticles obtained usinga microwave stimulated wet chemistry technique
International audience“In accordance with the rule of 2J + 1 at Cs symmetry a maximum of five sublevels should be present for the 5D0 → 7F1 andeight in the case of the 5D0 → 7F2 transitions whereas at C3 symmetry the 5D0 → 7F1 splits into two and the 5D0 → 7F2 into threeStark components.”Should have read:In accordance with the rule of 2J + 1 at Cs symmetry a maximum of three sublevels should be present for the 5D0 → 7F1 andfive in the case of the 5D0 → 7F2 transitions whereas at C3 symmetry the 5D0 → 7F1 splits into two and the 5D0 → 7F2 into threeStark components.The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.2780
Structural modification of nanohydroxyapatite Ca10(PO4)6(OH)2 related to Eu3+ and Sr2+ ions doping and its spectroscopic and antimicrobial properties
The Eu3+ and Sr2+ ions co-doped hydroxyapatite nanopowders (Ca10(PO4)6(OH)2) were synthesized via a precipitation method and post heat-treated at 500 °C. The concentration of Eu3+ ions was established in the range of 0.5–5 mol% to investigate the site occupancy preference. The concentration of Sr2+ ions was set at 5 mol%. The structural and morphological properties of the obtained materials were studied by an X-ray powder diffraction, a transmission electron microscopy techniques and infrared spectroscopy. As synthesized nanoparticles were in the range of 11–17 nm and annealed particles were in the range of 20–26 nm. The luminescence properties in dependence of the dopant concentration and applied temperature were investigated. The 5D0 → 7F0 transition shown the abnormally strong intensity for annealed materials connected with the increase of covalency character of Eu3+–O2− bond, which arise as an effect of charge compensation mechanism. The Eu3+ ions occupied three possible crystallographic sites in these materials revealed in emission spectra: one Ca(1) site with C3 symmetry and two Ca(2) sites with Cs symmetry arranged as cis and trans symmetry. The antibacterial properties of Eu3+ and Sr2+ ions doped and co-doped hydroxyapatite nanopowders were also determined against Gram-negative pathogens such as Pseudomonas aeruginosa, Klebsiella pneumoniae and Escherichia coli. Obtained results suggest that both europium and strontium ions may implement antibacterial properties for hydroxyapatites. In the most cases, better antibacterial effect we noticed for dopants at 5 mol% ratio. However, the effect is strongly species- and strain-dependent feature
Nanostructural Materials with Rare Earth Ions: Synthesis, Physicochemical Characterization, Modification and Applications
The success of nanotechnology in the field of physical, chemical and medical sciences has started revolutionizing the drug delivery science and theranostics (therapy and diagnostics) [...
Synthesis and Investigation of Physicochemical Properties and Biocompatibility of Phosphate–Vanadate Hydroxyapatite Co-Doped with Tb<sup>3+</sup> and Sr<sup>2+</sup> Ions
Searching for biocompatible materials with proper luminescent properties is of fundamental importance, as they can be applied in fluorescent labeling and regenerative medicine. In this study, we obtained new phosphate–vanadate hydroxyapatites (abbr. HVps) co-doped with Sr2+ and Tb3+ ions via the hydrothermal method. We focused on examining the effect of various annealing temperatures (500, 600 and 700 °C) on the spectroscopic properties and morphology of the obtained HVps. To characterize their morphology, XRPD (X-ray powder diffraction), SEM-EDS (scanning electron microscopy–energy-dispersive spectrometry), FT-IR (Fourier transform infrared) spectroscopy and ICP-OES (inductively coupled plasma–optical emission spectrometry) techniques were used. A further study of luminescent properties and cytocompatibility showed that the obtained HVps co-doped with Sr2+ and Tb3+ ions are highly biocompatible and able to enhance the proliferation process and can therefore be potentially used as fluorescent probes or in regenerative medicine
Review on Preformed Crowns in Pediatric Dentistry—The Composition and Application
The purpose of this review is to compare and contrast the various types of preformed crowns that can be used to restore the primary teeth in children. Historically, preformed crowns have been widely available for the past 50 years. The clinical performance of preformed crowns has evolved to meet higher functional, mechanical, and aesthetic demands. Preformed crowns are available in a range of prefabricated sizes and shapes. Preformed crowns can vary depending on their properties, compounds, methods of preparation, and biocompatibility
Preferential site substitution of Eu3+ ions in Ca10(PO4)6Cl2 nanoparticles obtained using microwave stimulated wet chemistry technique.
International audienceThe Eu3+ doped Ca10(PO4)6Cl2 nanocrystalline powders were synthesized using a microwave stimulated technique. Additional post heat treatment in the temperature range 800–1100 °C was applied in order to improve the crystallinity of the final product and eliminate the residual amorphous phase. Detailed structural characterization was performed by X-ray diffraction (XRD), Raman and infrared (IR) spectroscopy, transmission electron microscopy (TEM) and X-ray fluorescence (EDX). The optical properties of the Ca10(PO4)6Cl2 samples doped with different Eu3+ concentrations (0.5–5 mol%) were determined by measuring excitation, emission spectra and luminescence. TEM images confirmed the nanoscale nature of the final product with a primary particle size of about 60 nm and a hydrodynamic size of 200 nm when the product was dispersed in Milli-Q purified water (MQ) without further stabilization. The analysis of the 5D0 → 7F0 transition points out that for low concentration Ca(II) (A) site is preferentially substituted whereas increase of Eu3+ above 2 mol% results in domination of the Eu3+ cations located at Ca(I) (B) site. Increase of annealing temperature leads to an increase of the 5D0 → 7F0 intensity associated with the Eu3+ at A site. Preferential site substitution can be solved by analysis of the optical properties of the Eu3+ ion. The Judd–Ofelt parameters were calculated using simplified formalisms. The mechanism of concentration quenching process was identified as a dipole–dipole interaction
In Vitro Comparison of the Fluoride Ion Release from the First- and Second-Generation Fluoride Varnishes
Fluoride varnishes, both the first and the second generations, are effective in inhibiting caries, especially in children and adolescents, by reducing it on average by 43% for permanent teeth and 37% for deciduous teeth. The aim of this study was to evaluate the dynamics of in vitro fluoride ion release from first- (Duraphat) and second-generation (MI Varnish and Embrace Varnish) fluoride varnishes and the impact of the type of varnish, the time from its application and the pH of the environment on this process. Materials and methods: The test material (90 specimens), prepared from extracted human teeth, were divided into nine groups of 10 specimens each. Measured amounts of the examined varnishes were applied onto specimens and the levels of fluoride release were assessed at the baseline and after 1, 2, 24, 48 and 168 h from the application with the use of an ion-specific electrode. The specimens were immersed into artificial saliva with pH adjusted to 4, 5 and 7. The highest cumulative release of fluoride was obtained by MI Varnish (11.52 ppm/mg), regardless of the pH of the environment, whereas the lowest released fluoride concentration was achieved by Embrace Varnish (4.82 ppm/mg). In the acidic environment, the release of fluoride was significantly higher than in the neutral environment for all investigated varnishes, with no change in the overall fluoride release profile and with maximum fluoride release in the first two hours after application. The findings of this study indicate that all examined fluoride varnishes released the maximum amount of fluoride within the first hours after application and that it was related to the acidity of the immersion medium
Correction: Effects of crystalline growth on structural and luminescence properties of Ca (10−3x) Eu 2x (PO 4 ) 6 F 2 nanoparticles fabricated by using a microwave driven hydrothermal process
International audienc
The Use of Lactide Polymers in Bone Tissue Regeneration in Dentistry—A Systematic Review
(1) Background: Different compositions of biodegradable materials are being investigated to successfully replace non-resorbable ones in bone tissue regeneration in dental surgery. The systematic review tried to address the question, “Can biodegradable polymers act as a replacement for conventional materials in dental surgery procedures?” (2) Methods: An electronic search of the PubMed and Scopus databases was conducted in October 2022. The following keywords were used: (lactide polymers) and (hydroxyapatite or fluorapatite) and (dentistry) and (regeneration). Initially, 59 studies were found. Forty-one studies met the inclusion criteria and were included in the review. (3) Results: These usually improved the properties and induced osteogenesis, tissue mineralisation and bone regeneration by inducing osteoblast proliferation. Five studies showed higher induction of osteogenesis in the case of biomaterials, UV-HAp/PLLA, ALBO-OS, bioresorbable raw particulate hydroxyapatite/poly-L-lactide and PLGA/Hap, compared to conventional materials such as titanium. Four studies confirmed improvement in tissue mineralisation with the usage of biomaterials: hydroxyapatite/polylactic acid (HA/PLA) loaded with dog’s dental pulp stem cells (DPSCs), Coll/HAp/PLCL, PDLLA/VACNT-O:nHAp, incorporation of hydroxyapatite and simvastatin. Three studies showed an acceleration in proliferation of osteoblasts for the use of biomaterials with additional factors such as collagen and UV light. (4) Conclusions: Lactide polymers present higher osteointegration and cell proliferation rate than the materials compared. They are superior to non-biodegradable materials in terms of the biocompability, bone remodelling and healing time tests. Moreover, because there is no need of reoperation, as the material automatically degrades, the chance of scars and skin sclerosis is lower. However, more studies involving greater numbers of biomaterial types and mixes need to be performed in order to find a perfect biodegradable material