A scalable nanogenerator based on self-poled piezoelectric polymer nanowires with high energy conversion efficiency

Nanogenerators based on piezoelectric materials convert ever-present mechanical vibrations into electrical power for energetically autonomous wireless and electronic devices. Nanowires of piezoelectric polymers are particularly attractive for harvesting mechanical energy in this way, as they are flexible, lightweight and sensitive to small vibrations. Previous studies have focused exclusively on nanowires grown by electrospinning, but this involves complex equipment, and high voltages of $\approx$ 10 kV that electrically pole the nanowires and thus render them piezoelectric. Here we demonstrate that nanowires of poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) grown using a simple and cost-effective template-wetting technique, can be successfully exploited in nanogenerators without poling. A typical nanogenerator comprising $\approx$ 10$^{10}$ highly crystalline, self-poled, aligned nanowires spanning $\approx$ 2 cm$^2$ is shown to produce a peak output voltage of 3 V at 5.5 nA in response to low-level vibrations. The mechanical-to-electrical conversion efficiency of 11% exhibited by our template-grown nanowires is comparable with the best previously reported values. Our work therefore offers a scalable means of achieving high-performance nanogenerators for the next generation of self-powered electronics.SKN is grateful for support from the Royal Society through a Dorothy Hodgkin Fellowship. VN acknowledges the Herchel Smith Fund, University of Cambridge for a Fellowship. This work was supported by the EPSRC Cambridge NanoDTC, EP/G037221/1.This is the final version of the article. It first appeared from Wiley via http://dx.doi.org/10.1002/aenm.20140051

Observation of Confinement-Induced Self-Poling Effects in Ferroelectric Polymer Nanowires Grown by Template Wetting

Ferroelectric polymer nanowires grown using a template-wetting method are shown to achieve an orientated 'self-poled' structure resulting from the confined growth process. Self-poling is highly desirable as it negates the need for high electric fields, mechanical stretching and/or high temperatures typically associated with poling treatments in ferroelectric polymers, as required for piezoelectric and/or pyroelectric applications. Here, we present differential scanning calorimetry, infrared spectroscopy and dielectric permittivity measurements on as-fabricated template-grown polyvinylidene fluoride-trifluoroethylene (P(VDF-TrFE)) nanowires, and quantitatively compare the results with spin-cast films of the same composition that have been electrically poled, both before and after subsequent de-poling temperature treatment. The measurements reveal remarkably similar trends between the physical properties of the as-grown nanowires and the electrically poled film samples, providing insight into the material structure of the 'self-poled' nanowires. In addition, piezo-response force microscopy (PFM) data is presented that allow s for unambiguous identification of self-poling in ferroelectric polymer nanostructures, and indicates the suitability of the template-wetting approach in fabricating nanowires that can be used directly for piezoelectric/pyroelectric applications, without the need for post-deposition poling/processing.The authors are grateful for financial support from the European Research Council through an ERC Starting Grant (Grant no. ERC-2014-STG-639526, NANOGEN). R.A.W. thanks the EPSRC Cambridge NanoDTC, EP/G037221/1, for studentship funding.This is the author accepted manuscript. It is currently under an indefinite embargo pending publication by Wiley

Localized electromechanical interactions in ferroelectric P(VDF-TrFE) nanowires investigated by scanning probe microscopy

We investigate the electromechanical interactions in individual polyvinylidene fluoride-trifluoroethylene nanowires in response to localized electrical poling via a conducting atomic force microscope tip. Spatially resolved measurements of piezoelectric coefficients and elastic moduli before and after poling reveal a striking dependence on the polarity of the poling field, notably absent in thin films of the same composition. These observations are attributed to the unclamped nature of the nanowires and the inherent asymmetry in their chemical and electrical interactions with the tip and underlying substrate. Our findings provide insights into the mechanism of poling/switching in polymer nanowires critical to ferroelectric device performance.S.K.-N. and Y.C. are grateful for financial support from the European Research Council through an ERC Starting Grant (Grant No. ERC-2014-STG-639526, NANOGEN). R.A.W. thanks the EPSRC Cambridge NanoDTC, EP/G037221/1, for studentship funding. Q.J. is grateful for financial support through a Marie Sklodowska Curie Fellowship, H2020-MSCA-IF-2015-702868

Template-Assisted Hydrothermal Growth of Aligned Zinc Oxide Nanowires for Piezoelectric Energy Harvesting Applications.

A flexible and robust piezoelectric nanogenerator (NG) based on a polymer-ceramic nanocomposite structure has been successfully fabricated via a cost-effective and scalable template-assisted hydrothermal synthesis method. Vertically aligned arrays of dense and uniform zinc oxide (ZnO) nanowires (NWs) with high aspect ratio (diameter ∼250 nm, length ∼12 μm) were grown within nanoporous polycarbonate (PC) templates. The energy conversion efficiency was found to be ∼4.2%, which is comparable to previously reported values for ZnO NWs. The resulting NG is found to have excellent fatigue performance, being relatively immune to detrimental environmental factors and mechanical failure, as the constituent ZnO NWs remain embedded and protected inside the polymer matrix.The authors thank Yeonsik Choi for discussions and experimental support. S.K.-N., C.O., and A.D. are grateful for financial support from the European Research Council through an ERC Starting Grant (Grant no. ERC-2014-STG-639526, NANOGEN). F.L.B. and R.A.W. thank the EPSRC Cambridge NanoDTC, EP/G037221/1, for studentship funding. P.S.J. acknowledges the support of TEP-1900 and Talentia Postdoc Program, cofunded by the European Union’s Seventh Framework Program, Marie Skłodowska-Curie actions (COFUND Grant Agreement 267226) and the Ministry of Economy, Innovation, Science and Employment of the Junta de Andalucía. S-L.S acknowledges support through the EPSRC grant EP/M010589/1This is the final version of the article. It first appeared from American Chemical Society via http://dx.doi.org/10.1021/acsami.6b04041

First Results of the LUX Dark Matter Experiment

© 2015 Elsevier B.V..LUX (Large Underground Xenon) is a dark matter direct detection experiment deployed at the 4850 level of the Sanford Underground Research Facility (SURF) in Lead, SD, operating a 370 kg dual-phase xenon TPC. Results of the first WIMP search run were presented in late 2013, for the analysis of 85.3 live-days with a fiducial volume of 118 kg, taken during the period of April to August 2013. The experiment exhibited a sensitivity to spin-independent WIMP-nucleon elastic scattering with a minimum upper limit on the cross section of 7.6×10-46cm2 at a WIMP mass of 33 GeV/c2, becoming the worlds leading WIMP search result, in conflict with several previous claimed hints of discovery

Wearable Fall Detector using Integrated Sensors and Energy Devices

Wearable devices have attracted great attentions as next-generation electronic devices. For the comfortable, portable, and easy-to-use system platform in wearable electronics, a key requirement is to replace conventional bulky and rigid energy devices into thin and deformable ones accompanying the capability of long-term energy supply. Here, we demonstrate a wearable fall detection system composed of a wristband-type deformable triboelectric generator and lithium ion battery in conjunction with integrated sensors, controllers, and wireless units. A stretchable conductive nylon is used as electrodes of the triboelectric generator and the interconnection between battery cells. Ethoxylated polyethylenimine, coated on the surface of the conductive nylon electrode, tunes the work function of a triboelectric generator and maximizes its performance. The electrical energy harvested from the triboelectric generator through human body motions continuously recharges the stretchable battery and prolongs hours of its use. The integrated energy supply system runs the 3-axis accelerometer and related electronics that record human body motions and send the data wirelessly. Upon the unexpected fall occurring, a custom-made software discriminates the fall signal and an emergency alert is immediately sent to an external mobile device. This wearable fall detection system would provide new opportunities in the mobile electronics and wearable healthcare

First Results of the LUX Dark Matter Experiment

LUX (Large Underground Xenon) is a dark matter direct detection experiment deployed at the 4850' level of the Sanford Underground Research Facility (SURF) in Lead, SD, operating a 370 kg dual-phase xenon TPC. Results of the first WIMP search run were presented in late 2013, for the analysis of 85.3 live-days with a fiducial volume of 118 kg, taken during the period of April to August 2013. The experiment exhibited a sensitivity to spin-independent WIMP-nucleon elastic scattering with a minimum upper limit on the cross section of 7.6×10-46cm2 at a WIMP mass of 33 GeV/c2, becoming the world's leading WIMP search result, in conflict with several previous claimed hints of discovery

Comprehensive analysis of local and nonlocal amplitudes in the B0 → K*0μ+μ− decay

Abstract A comprehensive study of the local and nonlocal amplitudes contributing to the decay B0 → K*0(→ K+π−)μ+μ− is performed by analysing the phase-space distribution of the decay products. The analysis is based on pp collision data corresponding to an integrated luminosity of 8.4 fb−1 collected by the LHCb experiment. This measurement employs for the first time a model of both one-particle and two-particle nonlocal amplitudes, and utilises the complete dimuon mass spectrum without any veto regions around the narrow charmonium resonances. In this way it is possible to explicitly isolate the local and nonlocal contributions and capture the interference between them. The results show that interference with nonlocal contributions, although larger than predicted, only has a minor impact on the Wilson Coefficients determined from the fit to the data. For the local contributions, the Wilson Coefficient $${\mathcal{C}}_9$$ C 9 , responsible for vector dimuon currents, exhibits a 2.1σ deviation from the Standard Model expectation. The Wilson Coefficients $${\mathcal{C}}_{10}$$ C 10 , $${\mathcal{C}}_9^{\prime }$$ C 9 ′ and $${\mathcal{C}}_{10}^{\prime }$$ C 10 ′ are all in better agreement than $${\mathcal{C}}_9$$ C 9 with the Standard Model and the global significance is at the level of 1.5σ. The model used also accounts for nonlocal contributions from B0→ K*0[τ+τ−→ μ+μ−] rescattering, resulting in the first direct measurement of the bsττ vector effective-coupling $${\mathcal{C}}_{9\tau }$$ C 9 τ .</jats:p