Stripping foils for the PSB H- injection system

Beam physics considerations for the stripping foil of the PSB H- injection system are described, including the arguments for the foil type, thickness, geometry and positioning. The foil performance considerations are described, including expected stripping efficiency, emittance growth, energy straggling, temperature and lifetime. The required movement ranges and tolerances are detailed, together with the assumptions used

Dynamic Stresses in the LHC TCDS Diluter from 7 TeV Beam Loading

In the event of an unsynchronised beam abort, the MSD extraction septum of the LHC beam dumping system is protected from damage by the TCDS diluter. The simultaneous constraints of obtaining sufficient beam dilution while ensuring the survival of the TCDS make the design difficult, with high thermally induced dynamic stresses occurring in the material needed to attenuate the particle showers induced by the primary beam impact. In this paper, full 3D simulations are described where the worst-case beam loading has been used to generate the local temperature rise and to follow the resulting time evolution of the mechanical stresses. The results and the accompanying design changes for the TCDS, to provide an adequate performance margin, are detailed

Kenniscampus als compensatie

Beleidsmakers willen een kenniscampus ontwikkelen als alternatief voor de sluiting van de onderzoeksafdelingen van MSD en Abbott. Echter, het ontbreken van een private of publieke onderzoeksfaciliteit maakt deze kenniscampussen onaantrekkelijk als vestigingsplaats voor innovatieve bedrijven. Voor innovatie is aansluiten bij bestaande campussen gunstiger

Heterogeneity in ordered choice models: A review with applications to self-assessed health

Discrete variables that have an inherent sense of ordering across outcomes are commonly found in large datasets available to many economists, and are often the focus of research. However, assumptions underlying the standard Ordered Probit (which is usually used to analyse such variables) are not always justied by the data. This study provides a review of the ways in which the Ordered Probit might be extended to account for additional heterogeneity. Diering from other reviews in scope, application and relevance in economic settings, a series of issues pertaining to choices of variables, and the economic assumptions underlying each model are discussed in the context of measuring the underlying health of respondents. The models are applied to a wave of the Household, Income and Labour Dynamics in Australia survey, in order to check the appropriateness of such assumptions in an applied context

Beam Line Design for the CERN Hiradmat Test Facility

The LHC phase II collimation project requires beam shock and impact tests of materials used for beam intercepting devices. Similar tests are also of great interest for other accelerator components such as beam entrance/exit windows and protection devices. For this purpose a dedicated High Radiation Material test facility (HiRadMat) is under study. This facility may be installed at CERN at the location of a former beam line. This paper describes the associated beam line which is foreseen to deliver a 450 GeV proton beam from the SPS with an intensity of up to 3×10**13 protons per shot. Different beam line designs will be compared and the choice of the beam steering and diagnostic elements will be discussed, as well as operational issues

Septa and Distributor Developments for H- Injection into the Booster from LINAC4

The construction of Linac4 requires the modification of the existing injection system of the CERN PS Booster. A new transfer line will transport 160 MeV H- ions to this machine. A system of 5 pulsed magnets (BIDIS) and 3 vertical septa (BISMV) will distribute and inject the Linac pulses into the four-vertically separated Booster rings. Subsequently the beam will be injected horizontally, using a local bump created with bumpers (BS magnets) to bring the injected H- beam together with the orbiting proton beam onto the stripper foil. To accommodate the injected H- beam, the first of the BS magnets will have to be a septum-like device, deflecting only the orbiting beam. This paper highlights the requirements and technical issues and describes the solutions to be adopted for both the BIDIS and BISMV. The results of initial prototype testing of the BIDIS magnet will also be presented

Protection of the LHC against Unsynchronised Beam Aborts

An unsynchronised beam abort in the LHC could damage downstream accelerator components, in particular the extraction septum magnets, the experimental low-beta triplet magnet apertures and the tertiary collimators. Although the LHC beam dumping system includes design features to minimise their frequency, such unsynchronised aborts cannot be excluded. A system of protection devices comprising fixed and moveable diluters and collimators will protect the downstream LHC aperture from the misdirected bunches in case of such a failure. The sources of unsynchronised aborts are described, together with the requirements and design of the protection devices and their expected performance. The accompanying operational requirements and envisaged solutions are discussed, in particular the problem of ensuring the local orbit at the protection devices

The New SPS Extraction Channel for LHC and CNGS

The Large Hadron Collider (LHC) and CERN Neutrino to Gran Sasso (CNGS) projects require the construction of a new fast-extraction system in the long straight section LSS4 of the Super Proton Synchrotron (SPS) at CERN. A conventional DC septum magnet will be used, in conjunction with the installation of horizontal and vertical extraction bumpers, main quadrupoles with enlarged apertures, extraction kicker magnets and additional hardware protection, instrumentation, controls and electronics. The extraction channel must be able to accept the bright LHC proton beam at 450 GeV/c, and also the high intensity, large emittance fixed target CNGS proton beam at the nominal 400 GeV/c extraction momentum. This paper describes the extraction channel to be installed in 2003, and shows how the requirements for both the LHC and CNGS project can be met

Summary of the CERN Workshop on Materials for Collimators and Beam Absorbers

The main focus of the workshop was on collimators and beam absorbers for (mainly) High Energy Hadron Accelerators, with the energy stored in the beams far above damage limit. The objective was to better understand the technological limits imposed by mechanisms related to beam impact on materials. The idea to organise this workshop came up during the High Intensity High Brightness Hadron Beams, ICFA-HB2006 in Japan [1]. The workshop was organised 3-5 September 2007 at CERN, with about 60 participants, including 20 from outside CERN. About 30 presentations were given [2]. The event was driven by the LHC challenge, with more than 360 MJoule stored in each proton beam. The entire beam or its fraction will interact with LHC collimators and beam absorbers, and with the LHC beam dump blocks. Collimators and beam absorbers are also of the interest for other labs and accelerators: - CERN: for the CNGS target, for SPS beam absorbers (extraction protection) and collimators for protecting the transfer line between SPS and LHC - GSI: SIS18 and SIS 100/200, Super-FRS target, HED experiments, Antiproton target, etc. - Fermilab: Tevatron and Main Injector collimation systems; neutrino production targets (MINOS, SNuMI, NOVA); antiproton production targets; pion production targets and beam absorbers for neutrino factories and muon colliders - ILC: positron production targets, beam absorbers and collimators for a beam delivery system