Design and test of a 100 ampere-hour nickel cadmium battery module

A feasibility study was conducted on the design and construction of a flight-worthy replaceable battery module consisting of four 100 A.H. nickel-cadmium rechargeable cells for large manned space vehicles. The module is planned to weigh less than 43 pounds and be fully maintainable in a zero-g environment by one man without use of special tools. An active environmental control system was designed for the temperature control of the module

Predicting enhanced absorption of light gases in polyethylene using simplified PC-SAFT and SAFT-VR

International audienceAbsorption of light gases in polyethylene (PE) is studied using two versions of the Statistical Associating Fluid Theory (SAFT): SAFT for chain molecules with attractive potentials of variable range (VR) and simplified perturbed-chain (PC) SAFT. Emphasis is placed on the light gases typically present during ethylene polymerisation in the gas-phase reactor (GPR) process. The two approaches are validated using experimental binary-mixture data for gas absorbed in PE, and predictions are made for mixtures of more components. For most cases studied both SAFT versions perform equally well. For the case of ternary mixtures of two gases with PE, it is predicted that the less-volatile of the two gases acts to enhance the absorption of the more-volatile gas, while the more-volatile gas inhibits the absorption of the less-volatile gas. This general behaviour is also predicted in mixtures containing more gases, such as typical reactor mixtures. The magnitude of the effect may vary considerably, depending on the relative proximity of the gas-mixture saturation pressure to the reactor pressure; for example it is predicted that the absorption of ethylene may be approximately doubled if diluent gases, propane or nitrogen, are partially or completely replaced by less-volatile butane or pentane for a reactor pressure similar to 2 MPa. In the case of a co-polymerisation reaction, it is predicted that increases in absorption of both co-monomers may be obtained in roughly equal proportion. Our findings cast light on the so-called co-monomer effect, in which substantial increases in the rate of ethylene polymerisation are observed in the presence of hexene co-monomer, while suggesting that the effect is more general and not restricted to co-monomer. For example, similar rate increases may be expected in the presence of, e.g., pentane instead of hexene, but without the change in the branch structure of the produced polymer that is inevitable when the amount of co-monomer is increased

Design considerations to ensure accuracy when using the resazurin reduction assay to noninvasively quantify cell expansion within perfused extracellular matrix scaffolds

Analysis of perfusion-based bioreactors for organ engineering and a detailed evaluation of dynamic changes within maturing cell-laden scaffolds are critical components of ex vivo tissue development that remain understudied topics in the tissue and organ engineering literature. Precise measurement of cell numbers within bioartificial tissues and extracellular matrix scaffolds is necessary to provide measurement assurance and rigorous characterization of cell behavior within three-dimensional (3D) scaffolds. Accurate benchmarking of tissue function and biosynthetic activity to cell number facilitates comparison of data across experiments and between laboratories to increase rigor and reproducibility in tissue engineering and biofabrication. Soluble, fluorescent indicators of metabolic activity are valuable, noninvasive tools for estimating viable cell number. We investigated experimental conditions in which resazurin is a reliable indicator of cell content within 3D extracellular matrix kidney and liver scaffolds, and we present recommendations on experimental methodology for its optimal use. Resazurin is reduced to resorufin in proportion to metabolic activity of viable cells. Using three renal cell lines and one hepatic cell line, we show that correlation of viable cell number with the rate of resorufin generation may deviate from linearity at higher cell density, low resazurin working volumes, and/or longer incubation times – all of which contribute to depleting the working pool of resazurin. Importantly, we also show that the resazurin reduction rate in cell-conditioned medium is about double that in fresh culture medium. This finding has the potential to increase assay sensitivity, while saving expensive media. In conclusion, while the resazurin reduction assay provides a powerful, noninvasive readout for cell growth within extracellular matrix scaffolds, assay conditions may strongly influence its applicability for accurate quantification of cell number. The approach and recommendations developed in this study to maintain the pool of reducible resazurin may be used as a guide for application-specific optimization of the resazurin reduction assay to obtain accurate measurements of cell content in bioengineered tissues

Mathematical Model of Clonal Evolution Proposes a Personalised Multi-Modal Therapy for High-Risk Neuroblastoma

: Neuroblastoma is the most common extra-cranial solid tumour in children. Despite multi-modal therapy, over half of the high-risk patients will succumb. One contributing factor is the one-size-fits-all nature of multi-modal therapy. For example, during the first step (induction chemotherapy), the standard regimen (rapid COJEC) administers fixed doses of chemotherapeutic agents in eight two-week cycles. Perhaps because of differences in resistance, this standard regimen results in highly heterogeneous outcomes in different tumours. In this study, we formulated a mathematical model comprising ordinary differential equations. The equations describe the clonal evolution within a neuroblastoma tumour being treated with vincristine and cyclophosphamide, which are used in the rapid COJEC regimen, including genetically conferred and phenotypic drug resistance. The equations also describe the agents' pharmacokinetics. We devised an optimisation algorithm to find the best chemotherapy schedules for tumours with different pre-treatment clonal compositions. The optimised chemotherapy schedules exploit the cytotoxic difference between the two drugs and intra-tumoural clonal competition to shrink the tumours as much as possible during induction chemotherapy and before surgical removal. They indicate that induction chemotherapy can be improved by finding and using personalised schedules. More broadly, we propose that the overall multi-modal therapy can be enhanced by employing targeted therapies against the mutations and oncogenic pathways enriched and activated by the chemotherapeutic agents. To translate the proposed personalised multi-modal therapy into clinical use, patient-specific model calibration and treatment optimisation are necessary. This entails a decision support system informed by emerging medical technologies such as multi-region sequencing and liquid biopsies. The results and tools presented in this paper could be the foundation of this decision support system

Paramagnetic Phase of a Heavy-Fermion Compound, CeFePO, Probed by 57Fe M\"{o}ssbauer Spectroscopy

57Fe M\"{o}ssbauer spectroscopy was applied to an iron-based layered compound CeFePO. At temperatures from 9.4 to 293 K, no magnetic splitting was observed in the M\"ossbauer spectra of CeFePO indicating a paramagnetic phase of the Fe magnetic sublattice. All the spectra were fitted with a small quadrupole splitting, and the Debye temperature of CeFePO was found to be \sim448 K. The isomer shift at room temperature, 0.32 mm/s, was almost equal to those of LnFeAsO (Ln = La, Ce, Sm). Comparing s-electron density using the isomer shifts and unit cell volumes, it was found that the Fe of CeFePO has a similar valence state to other layered iron-based quaternary oxypnictides except LaFePO

Criticality in strongly correlated fluids

In this brief review I will discuss criticality in strongly correlated fluids. Unlike simple fluids, molecules of which interact through short ranged isotropic potential, particles of strongly correlated fluids usually interact through long ranged forces of Coulomb or dipolar form. While for simple fluids mechanism of phase separation into liquid and gas was elucidated by van der Waals more than a century ago, the universality class of strongly correlated fluids, or in some cases even existence of liquid-gas phase separation remains uncertain.Comment: Proceedings of Scaling Concepts and Complex Systems, Merida, Mexic

Density functional theory and demixing of binary hard rod-polymer mixtures

A density functional theory for a mixture of hard rods and polymers modeled as chains built of hard tangent spheres is proposed by combining the functional due to Yu and Wu for the polymer mixtures [J. Chem. Phys. {\bf 117}, 2368 (2002)] with the Schmidt's functional [Phys. Rev. E {\bf 63}, 50201 (2001)] for rod-sphere mixtures. As a simple application of the functional, the demixing transition into polymer-rich and rod-rich phases is examined. When the chain length increases, the phase boundary broadens and the critical packing fraction decreases. The shift of the critical point of a demixing transition is most noticeable for short chains.Comment: 4 pages,2 figures, in press, PR

The Structure of the Vortex Liquid at the Surface of a Layered Superconductor

A density-functional approach is used to calculate the inhomogeneous vortex density distribution in the flux liquid phase at the planar surface of a layered superconductor, where the external magnetic field is perpendicular to the superconducting layers and parallel to the surface. The interactions with image vortices are treated within a mean field approximation as a functional of the vortex density. Near the freezing transition strong vortex density fluctuations are found to persist far into the bulk liquid. We also calculate the height of the Bean-Livingston surface barrier.Comment: 8 pages, RevTeX, 2 figure

Self-diffusion coefficients of charged particles: Prediction of Nonlinear volume fraction dependence

We report on calculations of the translational and rotational short-time self-diffusion coefficients $D^t_s$ and $D^r_s$ for suspensions of charge-stabilized colloidal spheres. These diffusion coefficients are affected by electrostatic forces and many-body hydrodynamic interactions (HI). Our computations account for both two-body and three-body HI. For strongly charged particles, we predict interesting nonlinear scaling relations $D^t_s\propto 1-a_t\phi^{4/3}$ and $D^r_s\propto 1-a_r\phi^2$ depending on volume fraction $\phi$, with essentially charge-independent parameters $a_t$ and $a_r$. These scaling relations are strikingly different from the corresponding results for hard spheres. Our numerical results can be explained using a model of effective hard spheres. Moreover, we perceptibly improve the known result for $D^t_s$ of hard sphere suspensions.Comment: 8 pages, LaTeX, 3 Postscript figures included using eps