237 research outputs found
Study on wheel-rail interaction based on rail roughness
Environmental vibration and noise pollution caused by the operation of subway is a hot topic of concern at home and abroad. There is a need to research dynamic interaction between trains and track in order to solve environmental vibration and noise pollution caused by the operation of train. As an excitation source of the train vibration, rail surface roughness has significant impact on the wheel-rail interaction. In order to study the effect of rail roughness on the wheel-rail vibration load, the wheel-rail interaction model is established based on excitation of rail surface roughness in this paper. The effect of rail roughness on train vibration load is calculated by this model according to the measured rail roughness data in Beijing subway in the MATLAB program. Wheel-rail force in the most adverse situations is also calculated. The property of wheel-rail force under different conditions such as track forms, driving speed and curve radius is also analyzed in this paper
Study on the analytical model of vibration source for metro train
A novel analytical model of vibration source for metro train based on “coupled vehicle and track basic unit” is established in this paper. The dynamic vehicle-track equations are completed with the displacement compatibility and the force equilibrium, and the model takes into account the infinite track structure, whole vehicle, track irregularity and wheel-rail Hertz contact. The special feature of track structure model is the periodical system of discrete supported sleepers, which converts the infinite integral equation into the combination in the wave number-frequency domain and simplifies the calculation progress. The rail dynamic responses and the wheel-rail contact force can be calculated easily. A complete software package TMCVT is programmed. A calculated example is achieved using the program. Compared the theoretical calculated results and the field tested results ,the coincidence with each other proved the analytical dynamic model for metro train coupled with vehicle and track is correct
An experiment to assess vibration reduction ability of the rubber floating-slab tracks with different supporting forms
The rubber floating-slab track is one of the best methods to isolate vibration induced by the interaction of the train and the rails. In order to improve its vibration reduction ability, three kinds of supporting forms, i.e. full-surface supporting, linear supporting and point-like supporting, were discussed by laboratory tests. Through time history analysis and frequency spectrum analysis, we found that the linear supporting form and the point-like supporting form have the smaller first resonant frequency than the full-surface supporting form, which is induced by the weakened supporting stiffness. Because of this reason, the maximum values of vibration acceleration of the floating slab for the linear supporting form and the point-like supporting form increase in the time domain and the frequency domain. However, the point-like supporting form has the smallest transfer ratio of vibration acceleration from the floating slab to the tunnel wall compared with the linear supporting form and the full-surface supporting form
Analysis of PS-converted wave seismic data in the presence of azimuthal anisotropy
Shear-wave splitting and azimuthal variations of seismic attributes are two major
anisotropic effects induced by vertically-aligned fractures. They both have influences
on seismic data processing and interpretation, and provide information on fracture
properties. Azimuthal variations in P-wave data have been intensively studied to
improve imaging and obtain fracture parameters. However, azimuthal variations in
PS-converted wave seismic data, particularly the velocity variation in PS-converted
wave data, have not been well studied. Shear-wave splitting has been frequently used
to estimate fracture directions and densities. However, its influence on the azimuthal
variations of PS-converted wave data has also lacked a proper analysis. In this thesis,
I analyse the anisotropic behaviour of PS-converted wave seismic data in the
presence of azimuthal anisotropy, which includes the azimuthal variation of the PSconverted
wave and PS-converted wave splitting.
First, I demonstrate the robustness of PS-converted wave splitting for fracture
characterisation. PS-converted wave seismic data is also influenced by the splitting
effect due to its upgoing shear-wave leg. This important feature enables the
application of shear-wave splitting analysis to PS-converted wave seismic data. I use
synthetic data to show the necessity for separation of the split PS-converted waves.
Then I apply the PS-converted wave splitting analysis to Sanhu 3D3C land seismic
data. By separation of the fast and slow PS-converted waves and compensation for
the time delays, the imaging quality has been improved. Dominant fracture properties
obtained from the splitting analysis show a good correlation with the stress-field data.
However, this work is accomplished by assuming only one set of vertical fractures in
processing a given time window. In future work a specific layer-stripping algorithm
could be constructed and applied. .
Second, I study azimuthal variations of velocities in PS-converted wave seismic data.
It involves two major parts: analysing azimuthal variations of NMO velocities to
improve imaging, and examining the sensitivity of azimuthal variations to different
fluid saturations. For a layer with HTI anisotropy induced by a set of vertical
fractures, seismologists usually analyse the azimuthal behaviour exhibited on the
radial and transverse components, on which PS-converted wave data are recorded.
However, PS-converted waves also undergo shear-wave splitting, which complicates
the azimuthal variations of PS-converted wave data. I demonstrate that it is essential
to separate the fast P-SV1 wave from the slow P-SV2 wave, before applying any
azimuthal analysis. I derive an equation describing the azimuthal variation in PSconverted
wave NMO velocities, which shows the variation can be approximated
into an ellipse. Based on this theory, I build a workflow to analyse the azimuthal
variations of velocities in PS-converted wave data and apply this workflow to
synthetic data. The imaging quality can be improved by using this workflow.
Different fluid saturations in fractures have different influences on the azimuthal
variations of both P-wave and PS-converted wave data. I perform a numerical study
to understand how dry or water-saturated fractures control the azimuthal variations.
Through theoretical and synthetic studies, I find that the azimuthal variation of
velocities in PS-converted wave data is sensitive to different fluid saturations. By
analysing the azimuthal variation, the fracture properties can also be estimated, but
results are not as robust as those from PS-converted wave splitting analysis. I find
that azimuthal variations of fast P-SV1 and slow P-SV2 waves show in-phase
characteristics in dry fractures, but exhibit out-of-phase characteristics in water-saturated
fractures. This important feature could open a new application for using
PS-converted wave seismic data to distinguish oil-filled fractures from gas-filled
fractures. In cases where multiple HTI layers are involved, I have developed a
specific layer-stripping method to analyse both azimuthal variations and splitting
effects of PS-converted waves. By applying this method to synthetic data, the
fracture properties of each HTI layer can be estimated.
The analysis of azimuthal variations in PS-converted wave velocities is applied to
Daqing 3D3C land data. By using azimuthal velocity models in the PS-converted
wave seismic data processing, the imaging quality is improved, especially in the
anticline area where intensive fractures are likely to be developed. Furthermore, all
fracture information obtained from analysis of azimuthal variations and splitting
effects is compared with the stress-field data. The results from splitting analysis
show a better correlation with the stress-field study.
Finally, it is important to conclude that the analysis of PS-converted wave splitting is
a robust method to estimate fracture directions and densities. However, it is not
sensitive to different fluid saturations, which limits its application to fractured
reservoir characterisation. Azimuthal variations of PS-converted wave seismic data
can be analysed to improve imaging quality. Moreover their sensitivity to fluid
saturations may provide a new way to discriminate between oil-filled and gas-filled
fractures. However, the analysis of azimuthal variations is not as robust as the
analysis of splitting effects, and it may require appropriate calibration with other
fracture characterisation methods
Estimating and Improving the Performance of Prediction Models for Regression Test Selection
Researchers have proposed models to predict the percentage of the selected test cases when a Regression Test Selection (RTS) technique is used. One of the most successful and best performing RTS predictors is the Rosenblum and Weyuker (RW) coverage-based prediction model. However, previous evaluation results on RW predictor show that although it performs well on some subject programs, it deviates from actual percentage significantly on others. To understand the reason impacting RW predictor's performance, this research work presents a set of experiments on four factors that can potentially impact the RTS prediction performance. We setup two different set of experiments on several Java open-source test subjects and three RTS techniques. Our study on the effect of each factor on the RW performance reveals that large amount of code changes and significant code coverage overlaps between test cases are the two factors contributing to RW predictor's prediction error. Based on the experimental results and through regression analysis of the impacting factors, we propose a RW error estimator that can help testers and developers to gain a better understanding of RW predictor's confidence level and get insight into the applicability of the RW predictor to different organizations products and processes. To further improve RW predictor's performance, we propose an improved RW prediction model utilizing the error estimator to compensate prediction error. We also design a specific RTS improvement technique while presenting Harrold et al's improvement which also incorporates change history. Our experiments on these improved RW predictors demonstrate that they can reduce RW prediction error and improve performance
Genome-Wide Identification, Evolution, and Co-expression Network Analysis of Mitogen-Activated Protein Kinase Kinase Kinases in Brachypodium distachyon
Mitogen-activated protein kinase (MAPK) cascades are the conserved and universal signal transduction modules in all eukaryotes, which play the vital roles in plant growth, development and in response to multiple stresses. In this study, we used bioinformatics methods to identify 86 MAPKKK protein encoded by 73 MAPKKK genes in Brachypodium. Phylogenetic analysis of MAPKKK family from Arabidopsis, rice and Brachypodium has classified them into three subfamilies, of which 28 belonged to MEKK, 52 to Raf and 6 to ZIK subfamily respectively. Conserved protein motif, exon-intron organization and splicing intron phase in kinase domains supported the evolutionary relationships inferred from the phylogenetic analysis. And gene duplication analysis suggested the chromosomal segment duplication happened before the divergence of the rice and Brachypodium, while all of three tandem duplicated gene pairs happened after their divergence. We further demonstrated that the MAPKKKs have evolved under strong purifying selection, implying the conservation of them. The splicing transcripts expression analysis showed that the splicesome translating longest protein tended to be adopted. Furthermore, the expression analysis of BdMAPKKKs in different organs and development stages as well as heat, virus and drought stresses revealed that the MAPKKK genes were involved in various signaling pathways. And the circadian analysis suggested there were 41 MAPKKK genes in Brachypodium showing cycled expression in at least one condition, of which seven MAPKKK genes expressed in all conditions and the promoter analysis indicated these genes possessed many cis-acting regulatory elements involved in circadian and light response. Finally, the co-expression network of MAPK, MAPKK and MAPKKK in Brachypodium was constructed using 144 microarray and RNA-seq datasets, and ten potential MAPK cascades pathway were predicted. To conclude, our study provided the important information for evolutionary and functional characterization of MAPKKK family in Brachypodium, which will facilitate the functional analysis of BdMAPKKK genes, and also will facilitate better understanding the MAPK signal pathway in Brachypodium and beyond
The effects of anti-sense interleukin-5 gene transferred by recombinant adeno-associated virus in allergic rats
The accumulation and infiltration of eosinophils in airways is one of the most important characteristics of asthma, and is mediated partly by secretion of IL-5 from Th2 lymphocytes. It is well known that interleukin-5 (IL-5) played an important role in the regulation of eosinophils. In this study, an anti-sense IL-5 gene transferred by recombinant adeno-associated virus (rAAV-ASIL-5) was prepared to transfect allergic rats. It was found that the expression of IL-5 protein in plasma and BALF were inhibited significantly. The rAAV-ASIL-5-mediated suppression of total cell counts in peripheral blood and BALF were also observed. Moreover, rAAV-ASIL-5 remarkably reduced the eosinophil counts in peripheral blood and BALF, as well as the expression of ECP protein in plasma and BALF. The inflammation in lungs of rAAV-ASIL-5 pretreated rats also became slighter when compared with allergic rats. Otherwise, no apparent pathological damage to vital organs of rats was found. In conclusion, recombinant adeno-associated virus-mediated delivery of anti-sense IL-5 gene inhibited the accumulation of eosinophils and the airways inflammation in rat model of allergic asthma via suppressing IL-5 expression. It suggested the feasibility of rAAV-ASIL-5 in the gene therapy for allergic asthma and other eosinophilic diseases
Fluid inclusion geochemistry and rare earth element distributions in the Oka carbonatite, Quebec.
Two types of primary, aqueous fluid inclusions are present in monticellite, apatite and calcite from the Oka carbonatite: (1) liquid-vapour (LV) inclusions, and (2) liquid-vapour-halite (LVH) inclusions. LV inclusions have salinities of 4.3 to 24.7 wt.% and densities of 0.75 to 1.04 g/cm\sp3, and homogenize to the liquid phase between 95 and 435\sp\circC. The observed crystallization sequence of the host minerals was monticellite-apatite-calcite. Systematic variation in homogenization temperatures, salinities and densities of LV inclusions, combined with the crystallization sequence, suggests that type 1 fluids evolved from high to low salinity and probably from high to low temperature. The minimum pressure at which monticellite, apatite and calcite crystallized is estimated to have been about 7 to 10 kb. The nature of the trapped minerals in the inclusions and data from leachate and decrepitate analyses indicate that the fluids in the inclusions are principally composed of Na, Cl and S (sulphate?), and contain Ca, Mg, K, Fe, Si (silicate?) in subordinate amounts. LV fluid have high Ca/Na, K/Na, and Mg/Na ratios and lower Fe/Na ratios than LVH fluid. REE concentrations and La/Lu ratios of apatite increase with decreasing inclusion abundance in apatite and LV inclusion-rich apatites have higher REE concentrations but lower La/Lu ratios than LVH inclusion-rich apatites. This suggests that hydrothermal fluids may have removed LREE from the magma, and that the chemistry of fluids may have had an influence on REE distribution in the magma. The rare earth elements substitute for Ca in the apatite structure through the coupled substitution: \rm REE\sp{3+}+Si\sp{4+}\to Ca\sp{2+}+P\sp{5+}. Saline, aqueous, hydrothermal fluids were present during crystallization of monticellite, apatite and calcite from some of the carbonatite magmas. (Abstract shortened by UMI.)Dept. of Geology and Geological Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis1993 .L588. Source: Masters Abstracts International, Volume: 32-02, page: 0564. Adviser: I. M. Samson. Thesis (M.Sc.)--University of Windsor (Canada), 1993
- …