The Xpress Transfer Protocol (XTP): A tutorial (expanded version)

The Xpress Transfer Protocol (XTP) is a reliable, real-time, light weight transfer layer protocol. Current transport layer protocols such as DoD's Transmission Control Protocol (TCP) and ISO's Transport Protocol (TP) were not designed for the next generation of high speed, interconnected reliable networks such as fiber distributed data interface (FDDI) and the gigabit/second wide area networks. Unlike all previous transport layer protocols, XTP is being designed to be implemented in hardware as a VLSI chip set. By streamlining the protocol, combining the transport and network layers and utilizing the increased speed and parallelization possible with a VLSI implementation, XTP will be able to provide the end-to-end data transmission rates demanded in high speed networks without compromising reliability and functionality. This paper describes the operation of the XTP protocol and in particular, its error, flow and rate control; inter-networking addressing mechanisms; and multicast support features, as defined in the XTP Protocol Definition Revision 3.4

The Xpress Transfer Protocol (XTP): A tutorial (short version)

The Xpress Transfer Protocol (XTP) is a reliable, light weight transfer layer protocol. Current transport layer protocols such as DoD's Transmission Control Protocol (TCP) and ISO's Transport Protocol (TP) were not designed for the next generation of high speed, interconnected reliable networks such as fiber distributed data interface (FDDI) and the gigabit/second wide area networks. Unlike all previous transport layer protocols, XTP is being designed to be implemented in hardware as a VLSI chip set. By streamlining the protocol, combining the transport and network layers, and utilizing the increased speed and parallelization possible with a VLSI implementation, XTP will be able to provide the end-to-end data transmission rates demanded in the high speed networks without compromising reliability and functionality. This tutorial briefly describes the operation of the XTP protocol and in particular, its error, flow and rate control; inter-networking addressing mechanisms; and multicast support features, as defined in the XTP Protocol Definition Revision 3.4

A review of the mallet impact test for small scale explosive formulations

Presented at 19th Seminar on New Trends of Energetic Materials (NTREM 2016); 20-22/04/2016, Pardubice Czech RepublicDevelopment of new explosive formulations begins with the generation of only a few milligrams of material which is investigated using a number of small scale tests such as DSC, TGA, response to flame, mallet impact (mallet friction either glancing or direct blow) to determine whether the formulation is safe to scale up to 10 g. The latter of these tests, mallet impact, can be particularly subjective as the result is directly influenced by the operator carrying out the assessment. Not only can there be a change from one operator to another but there can also be a change in the force applied during each strike potentially leading to inconsistent results. This study highlights this encountered variation and assesses the load applied by a variety of operators with varying levels of explosive experience. This paper also proposes the use of a small scale laboratory based impact test which would provide improved confidence in the assessment of impact sensitiveness of explosive formulations and assist in justifying whether a formulation can be taken to the next scale. A small scale version of the BAM impact test (EMTAP Test 43) has been devised that allows the comparison of the sensitiveness of small scale formulations relative to RDX (8.7 J, EMTAP Test 43B) whilst also ensuring a reproducible result

Warm absorber, reflection and Fe K line in the X-ray spectrum of IC 4329A

Results from the X-ray spectral analysis of the ASCA PV phase observation of the Seyfert 1 galaxy IC 4329A are presented. We find that the 0.4 - 10 keV spectrum of IC 4329A is best described by the sum of a steep ($\Gamma \sim 1.98$) power-law spectrum passing through a warm absorber plus a strong reflection component and associated Fe K line, confirming recent results (Madejski et al. 1995, Mushotsky et al. 1995). Further cold absorption in excess of the Galactic value and covering the entire source is also required by the data, consistent with the edge-on galactic disk and previous X-ray measurements. The effect of the warm absorber at soft X-ray energies is best parameterized by two absorption edges, one consistent with OVI, OVII or NVII, the other consistent with OVIII. A description of the soft excess in terms of blackbody emission, as observed in some other Seyfert 1 galaxies, is ruled out by the data. A large amount of reflection is detected in both the GIS and SIS detectors, at similar intensities. We find a strong correlation between the amount of reflection and the photon index, but argue that the best solution with the present data is that given by the best statistical fit. The model dependence of the Fe K line parameters is also discussed. Our best fit gives a slightly broad ($\sigma \simeq 0.11 \pm 0.08$ keV) and redshifted (E $\simeq 6.20 \pm 0.07$ keV) Fe K line, with equivalent width $\simeq$ 89 $\pm$ 33 eV. The presence of a weak Fe K line with a strong reflection can be reconciled if one assumes iron underabundances or ionized reflection. We also have modeled the line with a theoretical line profile produced by an accretion disk. This yields results in better agreement with the constraints obtained from the reflection component.Comment: Accepted for publication in The Astrophysical Journal, 10th February 1996 issue; 24 pages and 8 figures + 1 table tared, compressed and uuencoded (with uufiles

Water production models for Comet Bradfield (1979 l)

The IUE observations of Comet Bradfield (1979 l) made 10 January 1980 to 3 March 1980 permit a detailed study of water production for this comet. Brightness measurements are presented for all three water dissociation products, H, O, and OH, and comparisons are made with model predictions. The heliocentric variation of the water production rate was derived

AIRNET: A real-time comunications network for aircraft

A real-time local area network was developed for use on aircraft and space vehicles. It uses token ring technology to provide high throughput, low latency, and high reliability. The system was implemented on PCs and PC/ATs operating on PCbus, and on Intel 8086/186/286/386s operating on Multibus. A standard IEEE 802.2 logical link control interface was provided to (optional) upper layer software; this permits the controls designer to utilize standard communications protocols (e.g., ISO, TCP/IP) if time permits, or to utilize a very fast link level protocol directly if speed is critical. Both unacknowledged datagram and reliable virtual circuit services are supported. A station operating an 8 MHz Intel 286 as a host can generate a sustained load of 1.8 megabits per second per station, and a 100-byte message can be delivered from the transmitter's user memory to the receiver's user memory, including all operating system and network overhead, in under 4 milliseconds

Role of oxygen in the electron-doped superconducting cuprates

We report on resistivity and Hall measurements in thin films of the electron-doped superconducting cuprate Pr$_{2-x}$Ce$_{x}$CuO$_{4\pm\delta}$. Comparisons between x = 0.17 samples subjected to either ion-irradiation or oxygenation demonstrate that changing the oxygen content has two separable effects: 1) a doping effect similar to that of cerium, and 2) a disorder effect. These results are consistent with prior speculations that apical oxygen removal is necessary to achieve superconductivity in this compound.Comment: 5 pages, 5 figure

Media(ted) fabrications: How the science-media symbiosis helped ‘sell’ cord banking

This paper considers the problematic role of the science–media symbiosis in the dissemination of misleading and emotionally manipulative information regarding services offered by CordBank, New Zealand's only umbilical cord blood banking facility. As this case study illustrates, the growing reliance of health and science reporters on the knowledge capital of medical specialists, biogenetic researchers, and scientists potentially enhances the ability of ‘expert’ sources to set the agenda for media representations of emerging medical and scientific developments, and may undermine the editorial independence of journalists and editors, many of whom in this case failed to critically evaluate deeply problematic claims regarding the current and future benefits of cord banking. Heavy reliance on established media frames of anecdotal personalization and technoboosterism also reinforced a proscience journalistic culture in which claims by key sources were uncritically reiterated and amplified, with journalistic assessments of the value of cord banking emphasizing potential benefits for individual consumers. It is argued that use of these media frames potentially detracts from due consideration of the broader social, ethical, legal, and health implications of emerging biomedical developments, along with the professional, personal, and increasingly also financial interests at stake in their public promotion, given the growing commercialization of biogenetic technologies