A three-node C deg element for analysis of laminated composite sandwich shells

A three-node flat shell element with C deg rotation fields has been developed for analysis of arbitrary composite shells. The element may consist of any number of orthotropic layers, each layer having different material properties and angular orientation. The formulation includes coupling between bending and extension, which is essential for analysis of unsymmetric laminates. Shearing deflections are included, since laminated and sandwich construction frequently results in shear stiffness much smaller than bending stiffness. Formulation of the element is straightforward, and calculation of its stiffness matrix is simple and fast. Convergence of solutions with mesh refinement is uniform for both thin and thick shells and is insensitive to element shape, although not as rapid as some other elements that lack one or more capabilities of the newly developed element. An experimental verification of the shall element is reported in the appendix

LDEF polymeric materials: 10 months versus 5.8 years of exposure

The chemical characterization of several polymeric materials which received 10 months of exposure and 5.8 years of exposure on a Row 9 Long Duration Exposure Facility (LDEF) experiment (A0134) is reported. Specimens include fluorinated ethylene propylene (FEP) teflon film, polysulfone film, and graphite fiber reinforced epoxy amd polysulfone matrix composites. The responses of these materials to the two LEO exposures are compared. The results of infrared, thermal, x-ray photoelectron, and scanning electron microscope analyses are reported. Solution property measurements of various molecular weight parameters are presented for the thermoplastic polysulfone materials. Molecular level effects attributable to exposure that were present in 10-month exposed specimens were not found in 5.8-year exposed specimens. This result suggests that increased atomic oxygen fluence toward the end of the LDEF mission may have eroded away selected environmentally induced changes in surface chemistry for 5.8-year exposure specimens

Annual report of the Archaeological Society of Victoria, 1977

Activities of the Archaeological Society of Victoria

New sub-millimeter limits on dust in the 55 Cancri planetary system

We present new, high-sensitivity sub-millimeter observations towards 55 Cancri, a nearby G8 star with one, or possibly two, known planetary companion(s). Our 850 $\mu$m map, obtained with the SCUBA instrument on the James Clerk Maxwell Telescope, shows three peaks of emission at the 2.5 mJy level in the vicinity of the star's position. However, the observed peaks are 25\arcsec--40\arcsec away from the star and a deep $R$-band optical image reveals faint point sources that coincide with two of the sub-millimeter peaks. Thus, we do not find evidence for dust emission spatially associated with 55 Cancri. The excess 60 $\mu$m emission detected with ISO may originate from one or more of the 850 $\mu$m peaks that we attribute to background sources. Our new results, together with the HST/NICMOS coronographic images in the near-infrared, place stringent limits on the amount of dust in this planetary system, and argue against the existence of a detectable circumstellar dust disk around 55 Cnc.Comment: 11 pages, 2 PostScript figures, to appear in The Astrophysical Journal Letter

Expression profiling of snoRNAs in normal hematopoiesis and AML

Key Points A subset of snoRNAs is expressed in a developmental- and lineage-specific manner during human hematopoiesis. Neither host gene expression nor alternative splicing accounted for the observed differential expression of snoRNAs in a subset of AML.</jats:p

Millimeter-wave diode-grid phase shifters

Monolithic diode grids have been fabricated on 2-cm square gallium-arsenide wafers with 1600 Schottky-barrier varactor diodes. Shorted diodes are detected with a liquid-crystal technique, and the bad diodes are removed with an ultrasonic probe. A small-aperture reflectometer that uses wavefront division interference was developed to measure the reflection coefficient of the grids. A Phase shift of 70° with a 7-dB loss was obtained at 93 GHz when the bias on the diode grid was changed from -3 V to 1 V. A simple transmission-line grid model, together with the measured low-frequency parameters for the diodes, was shown to predict the measured performance over the entire capacitive bias range of the diodes, as well as over the complete reactive tuning range provided by a reflector behind the grid, and over a wide range of frequencies form 33 GHz to 141 GHz. This shows that the transmission-line model and the measured low-frequency diode parameters can be used to design an electronic beam-steering array and to predict its performance. An electronic beam-steering array made of a pair of grids using state-of-the-art diodes with 5-Ω series resistances would have a loss of 1.4 dB at 90 GHz

Ecology and Control of Goldenweeds.

4 p

Millimeter-Wave Diode-Grid Frequency Doubler

Monolithic diode grid were fabricated on 2-cm^2 gallium-arsenide wafers in a proof-of-principle test of a quasi-optical varactor millimeter-wave frequency multiplier array concept. An equivalent circuit model based on a transmission-line analysis of plane wave illumination was applied to predict the array performance. The doubler experiments were performed under far-field illumination conditions. A second-harmonic conversion efficiency of 9.5% and output powers of 0.5 W were achieved at 66 GHz when the diode grid was pumped with a pulsed source at 33 GHz. This grid had 760 Schottky-barrier varactor diodes. The average series resistance was 27 Ω, the minimum capacitance was 18 fF at a reverse breakdown voltage of -3 V. The measurements indicate that the diode grid is a feasible device for generating watt-level powers at millimeter frequencies and that substantial improvement is possible by improving the diode breakdown voltage

The direct role of enzyme hydrolysis on ammonium regeneration rates in estuarine sediments

Benthic ammonium (NH4 +) regeneration in coastal marine sediments has a fundamental role in nitrogen (N) cycling and N supply to primary producers. Nitrogen regeneration involves benthic microbial mineralization of organic-N, which, in turn, depends on protein hydrolysis. These processes were examined in Aransas Bay (Texas, USA) sediments by monitoring NH4 + evolution as a function of enzyme activity in controlled sediment slurries. Casein and tannic acid were added to evaluate the direct role of aminopeptidase on NH4 + production and the effects of a polyphenolic enzyme inhibitor, respectively. Casein additions increased the NH4 + concentration from 19 ± 0.3 to 737 ± 150 μM in 120 h, a final concentration 4.3-fold higher than that of control samples and 2.9-fold higher than that of samples with casein and tannic added together. Lower NH4 + concentration in samples with tannic acid indicated that inhibiting aminopeptidase activity reduced NH4 + production rates. The concentration of the regenerated NH4 + related directly to aminopeptidase activity in controls (r = 0.86, p \u3c 0.01), casein-enriched (r = 0.89, p \u3c 0.01), and casein plus polyphenol treatments (r = 0.71, p \u3c 0.01) over the first 72 h. The results demonstrate the importance of aminopeptidase in regenerating NH4 + in sediments and provide insights about mechanisms of enzyme hydrolysis and NH4 + fluxes in estuarine sediments