A study for systematic errors of the GLA forecast model in tropical regions

From the sensitivity studies performed with the Goddard Laboratory for Atmospheres (GLA) analysis/forecast system, it was revealed that the forecast errors in the tropics affect the ability to forecast midlatitude weather in some cases. Apparently, the forecast errors occurring in the tropics can propagate to midlatitudes. Therefore, the systematic error analysis of the GLA forecast system becomes a necessary step in improving the model's forecast performance. The major effort of this study is to examine the possible impact of the hydrological-cycle forecast error on dynamical fields in the GLA forecast system

Proceedings of the NASA Symposium on Global Wind Measurements

This Proceedings contains a collection of the papers which were presented at the Symposium and Workshop on Global Wind Measurements. The objectives and agenda for the Symposium and Workshop were decided during a planning meeting held in Washington, DC, on 5 February 1985. Invited papers were presented at the Symposium by meteorologists and leading experts in wind sensing technology from the United States and Europe on: (1) the meteorological uses and requirements for wind measurements; (2) the latest developments in wind sensing technology; and (3) the status of our understanding of the atmospheric aerosol distribution. A special session was also held on the latest development in wind sensing technology by the United States Air Force

Coupled dynamics and economic analysis of floating wind turbine systems

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2006.Includes bibliographical references (p. 145-146).Against the backdrop of rising oil prices and increasing uncertainty in the future of energy and the health of the environment, wind energy is distinguished as a leading technology that is both technologically and economically viable for large-scale non-petroleum and non-polluting energy generation. The deployment of wind energy technology on floating platforms in deep water offshore environments has emerged as a forward-thinking application of this technology. This thesis takes some early steps toward the development of innovative and cost-effective floating platforms to support a 5-MW wind turbine for deployment in water depths of 30 - 300 meters. A tool for performing a coupled structural, hydrodynamic, and aerodynamic analysis of floating wind turbine systems in the frequency domain was developed and is presented. This analysis tool includes the effects of the gyroscopic loads of the wind turbine rotor on the tower and floater, the aerodynamic damping introduced by the wind turbine rotor, the hydrodynamic added mass and damping introduced by wave-body interactions, and the hydrodynamic forces caused by wave excitation.(cont.) This analysis tool was applied to several structures representing excerpts of the design space of structures capable of supporting large wind turbines. The structures were evaluated on their dynamic performance in several environmental conditions and on their installed cost. An economic analysis was also carried out to determine the cost of the floating platform for the wind turbine per kWh of electricity generated.by Elizabeth Wayman.S.M

The use of TOMS-modified VAS data for large-scale NWP

Collocation statistics obtained by comparing VISSR Atmospheric Sounder (VAS) temperature soundings with those from nearby rawinsondes indicate good agreement. However, the VAS soundings exhibited a substantial cold bias in the middle and upper troposphere. The error makes promising the use of the Total Ozone Mapping Spectrometer (TOMS) to obtain an independent estimate of tropopause pressure for use in the retrieval program. Good agreement is found between TOMS data and tropopause pressure. A quantitative assessment for the correlation of tropopause pressure, obtained from TOMS by regression and from rawinsondes over Europe, is reported

"Cold Melting" of Invar Alloys

An anomalously strong volume magnetostriction in Invars may lead to a situation when at low temperatures the dislocation free energy becomes negative and a multiple generation of dislocations becomes possible. This generation induces a first order phase transition from the FCC crystalline to an amorphous state, and may be called "cold melting". The possibility of the cold melting in Invars is connected with the fact that the exchange energy contribution into the dislocation self energy in Invars is strongly enhanced, as compared to conventional ferromagnetics, due to anomalously strong volume magnetostriction. The possible candidate, where this effect can be observed, is a FePt disordered Invar alloy in which the volume magnetostriction is especially large

Branching coral growth and visual health during bleaching and recovery on the central Great Barrier Reef

Coral reefs are under threat from cumulative impacts such as cyclones, crown-of-thorns starfish (COTS) outbreaks and climate-driven coral bleaching events. Branching corals are more severely impacted by these events than other coral morphologies due to their sensitivity to heat stress and weaker skeletons and COTS preferred prey. The central Great Barrier Reef experienced unprecedented back-to-back bleaching events in 2016 and 2017. This study commenced in 2017 at the peak of heat stress and examined the impact of the heatwave on the survival and recovery of corals by assessing the growth, health (based on the visual health index) and physiological parameters (chlorophyll a, zooxanthellae density, lipid and protein content) of two species, Acropora millepora and Pocillopora acuta (N = 60 colonies for each species). It was conducted across a gradient of turbidity at three reefs, Pandora, Orpheus and Rib, that experienced in April 2017, degree heating weeks (DHW) of 9, 8 and 7, respectively. Orpheus experienced the worst bleaching, based on visual health score, followed by Rib and Pandora. Rib experienced the greatest mortality (78% by Nov 2017); however, this was attributed to the presence of actively feeding crown-of-thorns starfish. Growth rates of A. millepora were almost twice the rate of P. acuta. Both species showed significant seasonal variation with growth of A. millepora and P. acuta 35–40% and 23–33% significantly greater in the summer, respectively. Differences in growth rates were best explained by indicators of energy acquisition. For example, the most important predictor variable in determining higher growth rates and visual health score in A. millepora was chlorophyll a content. For P. acuta, visual health score was the best predictor variable for higher growth rates. This study highlights the important role that chlorophyll a and associated symbionts play in growth and survival in these corals during and after a heat stress event

Zebrafish Reproduction: Revisiting In Vitro Fertilization to Increase Sperm Cryopreservation Success

Although conventional cryopreservation is a proven method for long-term, safe storage of genetic material, protocols used by the zebrafish community are not standardized and yield inconsistent results, thereby putting the security of many genotypes in individual laboratories and stock centers at risk. An important challenge for a successful zebrafish sperm cryopreservation program is the large variability in the post-thaw in vitro fertilization success (0 to 80%). But how much of this variability was due to the reproductive traits of the in vitro fertilization process, and not due to the cryopreservation process? These experiments only assessed the in vitro process with fresh sperm, but yielded the basic metrics needed for successful in vitro fertilization using cryopreserved sperm, as well. We analyzed the reproductive traits for zebrafish males with a strict body condition range. It did not correlate with sperm volume, or motility (P>0.05), but it did correlate with sperm concentration. Younger males produced more concentrated sperm (P<0.05). To minimize the wastage of sperm during the in vitro fertilization process, 106 cells/ml was the minimum sperm concentration needed to achieve an in vitro fertilization success of ≥ 70%. During the in vitro process, pooling sperm did not reduce fertilization success (P>0.05), but pooling eggs reduced it by approximately 30 to 50% (P<0.05). This reduction in fertilization success was due not to the pooling of the females' eggs, but to the type of tools used to handle the eggs. Recommendations to enhance the in vitro process for zebrafish include: 1) using males of a body condition closer to 1.5 for maximal sperm concentration; 2) minimizing sperm wastage by using a working sperm concentration of 106 motile cells/ml for in vitro fertilization; and 3) never using metal or sharp-edged tools to handle eggs prior to fertilization

Partition of Environmental Chemicals between Maternal and Fetal Blood and Tissues

Passage of environmental chemicals across the placenta has important toxicological consequences, as well as for choosing samples for analysis and for interpreting the results. To obtain systematic data, we collected in 2000 maternal and cord blood, cord tissue, placenta, and milk in connection with births in the Faroe Islands, where exposures to marine contaminants is increased. In 15 sample sets, we measured a total of 87 environmental chemicals, almost all of which were detected both in maternal and fetal tissues. The maternal serum lipid-based concentrations of organohalogen compounds averaged 1.7 times those of cord serum, 2.8 times those of cord tissue and placenta, and 0.7 those of milk. For organohalogen compounds detectable in all matrices, a high degree of correlation between concentrations in maternal serum and the other tissues investigated was generally observed (r2 > 0.5). Greater degree of chlorination resulted in lower transfer from maternal serum into milk. Concentrations of pentachlorbenzene, γ-hexachlorocyclohexane, and several polychlorinated biphenyl congeners with low chlorination were higher in fetal samples and showed poor correlation with maternal levels. Perfluorinated compounds occurred in lower concentrations in cord serum than in maternal serum. Cadmium, lead, mercury, and selenium were all detected in fetal samples, but only mercury showed close correlations among concentrations in different matrices. Although the environmental chemicals examined pass through the placenta and are excreted into milk, partitions between maternal and fetal samples are not uniform

Crystallographic structure of ultrathin Fe films on Cu(100)

We report bcc-like crystal structures in 2-4 ML Fe films grown on fcc Cu(100) using scanning tunneling microscopy. The local bcc structure provides a straightforward explanation for their frequently reported outstanding magnetic properties, i.e., ferromagnetic ordering in all layers with a Curie temperature above 300 K. The non-pseudomorphic structure, which becomes pseudomorphic above 4 ML film thickness is unexpected in terms of conventional rules of thin film growth and stresses the importance of finite thickness effects in ferromagnetic ultrathin films.Comment: 4 pages, 3 figures, RevTeX/LaTeX2.0