Cu₂SiSe₃ as a promising solar absorber: harnessing cation dissimilarity to avoid killer antisites

Copper-chalcogenides are promising candidates for thin film photovoltaics due to their ideal electronic structure and potential for defect tolerance. To this end, we have theoretically investigated the optoelectronic properties of Cu₂SiSe₃, due to its simple ternary composition, and the favourable difference in charge and size between the cation species, limiting antisite defects and cation disorder. We find it to have an ideal, direct bandgap of 1.52 eV and a maximum efficiency of 30% for a 1.5 μm-thick film at the radiative limit. Using hybrid density functional theory, the formation energies of all intrinsic defects are calculated, revealing the p-type copper vacancy as the dominant defect species, which forms a perturbed host state. Overall, defect concentrations are predicted to be low and have limited impact on non-radiative recombination, as a consequence of the p–d coupling and antibonding character at the valence band maxima. Therefore, we propose that Cu₂SiSe₃ should be investigated further as a potential defect-tolerant photovoltaic absorber

Interface stoichiometry control to improve device voltage and modify band alignment in ZnO/Cu_2O heterojunction solar cells

The interface stoichiometry of cuprous oxide (Cu_2O) was controlled by adjusting the O_2 and Zn partial pressures during ZnO sputter deposition and measured by high-resolution X-ray photoelectron spectroscopy of ultrathin (<3 nm) ZnO films on Cu_2O. Open-circuit voltage measurements for ZnO/Cu_2O heterojunctions under AM1.5 illumination were measured and it was found that a stoichiometric interface can achieve the voltage entitlement dictated by the band alignment, whereas the non-stoichiometric interface showed large open-circuit voltage deficits. These results highlight not only the need for stoichiometric interfaces in Cu_2O devices, but also a reproducible experimental method for achieving stoichiometric interfaces that could be applied to any potential heterojunction partner. Additionally, valence-band offset measurements indicated changing the interface stoichiometry shifted the band alignment between Cu_2O and ZnO, which accounts for the variation in previously reported band offset values

Read counts from environmental DNA (eDNA) metabarcoding reflect fish abundance and biomass in drained ponds.

The sampling of environmental DNA (eDNA) coupled with cost-efficient and ever-advancing sequencing technology is propelling changes in biodiversity monitoring within aquatic ecosystems. Despite the increasing number of eDNA metabarcoding approaches, the ability to quantify species biomass and abundance in natural systems is still not fully understood. Previous studies have shown positive but sometimes weak correlations between abundance estimates from eDNA metabarcoding data and from conventional capture methods. As both methods have independent biases a lack of concordance is difficult to interpret. Here we tested whether read counts from eDNA metabarcoding provide accurate quantitative estimates of the absolute abundance of fish in holding ponds with known fish biomass and number of individuals. Environmental DNA samples were collected from two fishery ponds with high fish density and broad species diversity. In one pond, two different DNA capture strategies (on-site filtration with enclosed filters and three different preservation buffers versus lab filtration using open filters) were used to evaluate their performance in relation to fish community composition and biomass/abundance estimates. Fish species read counts were significantly correlated with both biomass and abundance, and this result, together with information on fish diversity, was repeatable when open or enclosed filters with different preservation buffers were used. This research demonstrates that eDNA metabarcoding provides accurate qualitative and quantitative information on fish communities in small ponds, and results are consistent between different methods of DNA capture. This method flexibility will be beneficial for future eDNA-based fish monitoring and their integration into fisheries management

Energy-band alignment of II-VI/Zn_(3)P_2 heterojunctions from x-ray photoemission spectroscopy

The energy-band alignments for zb-ZnSe(001)/α-Zn_(3)P_2(001), w-CdS(0001)/α-Zn_(3)P_2(001), and w-ZnO(0001)/α-Zn_(3)P_2(001) heterojunctions have been determined using high-resolution x-ray photoelectron spectroscopy via the Kraut method. Ab initio hybrid density functional theory calculations of the valence-band density of states were used to determine the energy differences between the core level and valence-band maximum for each of the bulk materials. The ZnSe/Zn_(3)P_2 heterojunction had a small conduction-band offset, ΔEC, of −0.03 ± 0.11 eV, demonstrating a nearly ideal energy-band alignment for use in thin-film photovoltaic devices. The CdS/Zn_(3)P_2 heterojunction was also type-II but had a larger conduction-band offset of ΔEC = −0.76 ± 0.10 eV. A type-III alignment was observed for the ZnO/Zn_(3)P_2 heterojunction, with ΔEC = −1.61 ± 0.16 eV indicating the formation of a tunnel junction at the oxide–phosphide interface. The data also provide insight into the role of the II-VI/Zn_(3)P_2 band alignment in the reported performance of Zn_(3)P_2 heterojunction solar cells

Valence band modification of Cr2O3 by Ni-doping: creating a high figure of merit p-type TCO

p-Type transparent conductors and semiconductors still suffer from remarkably low performance compared to their more widespread n-type counterparts, despite extensive investigation into their development. In this contribution, we present a comparative study on the defect chemistry of potential p-type transparent conducting oxides Mg-doped and Ni-doped Cr 2 O 3 . Conductivities as high as 28 S cm -1 were achieved by Ni-doping. By benchmarking crystallography and spectroscopy characterization against density functional theory calculations, we show that the incorporation of Ni into Cr 2 O 3 contributes to the composition of the valence band, making the formed holes more delocalized, while Mg states do not interact with the valence band in Mg-doped Cr 2 O 3 . Furthermore, it is experimentally proven that Ni has a higher solubility in Cr 2 O 3 than Mg, at least in the highly non-thermodynamic deposition conditions used for these experiments, which directly translates into a higher acceptor concentration. The combination of these two effects means that Ni is a more effective acceptor in Cr 2 O 3 than Mg and explains the improved conductivity observed for the former