A new momentum management controller for the space station

A new approach to CMG (control moment gyro) momentum management and attitude control of the Space Station is developed. The control algorithm utilizes both the gravity-gradient and gyroscopic torques to seek torque equilibrium attitude in the presence of secular and cyclic disturbances. Depending upon mission requirements, either pitch attitude or pitch-axis CMG momentum can be held constant: yaw attitude and roll-axis CMG momentum can be held constant, while roll attitude and yaw-axis CMG momentum cannot be held constant. As a result, the overall attitude and CMG momentum oscillations caused by cyclic aero-dynamic disturbances are minimized. A state feedback controller with minimal computer storage requirement for gain scheduling is also developed. The overall closed-loop system is stable for + or - 30 percent inertia matrix variations and has more than + or - 10 dB and 45 deg stability margins in each loop

A simulation model for wind energy storage systems. Volume 1: Technical report

A comprehensive computer program for the modeling of wind energy and storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel and pneumatic) was developed. The level of detail of Simulation Model for Wind Energy Storage (SIMWEST) is consistent with a role of evaluating the economic feasibility as well as the general performance of wind energy systems. The software package consists of two basic programs and a library of system, environmental, and load components. The first program is a precompiler which generates computer models (in FORTRAN) of complex wind source storage application systems, from user specifications using the respective library components. The second program provides the techno-economic system analysis with the respective I/O, the integration of systems dynamics, and the iteration for conveyance of variables. SIMWEST program, as described, runs on the UNIVAC 1100 series computers

Distribution of the second virial coefficients of globular proteins

George and Wilson [Acta. Cryst. D 50, 361 (1994)] looked at the distribution of values of the second virial coefficient of globular proteins, under the conditions at which they crystallise. They found the values to lie within a fairly narrow range. We have defined a simple model of a generic globular protein. We then generate a set of proteins by picking values for the parameters of the model from a probability distribution. At fixed solubility, this set of proteins is found to have values of the second virial coefficient that fall within a fairly narrow range. The shape of the probability distribution of the second virial coefficient is Gaussian because the second virial coefficient is a sum of contributions from different patches on the protein surface.Comment: 5 pages, including 3 figure

Precision measurement of the 5 2S1/2 - 4 2D5/2 quadrupole transition isotope shift between 88Sr+ and 86Sr+

We have measured the isotope shift of the narrow quadrupole-allowed 5 2S1/2 - 4 2D5/2 transition in 86Sr+ relative to the most abundant isotope 88Sr+. This was accomplished using high-resolution laser spectroscopy of individual trapped ions, and the measured shift is Delta-nu_meas^(88,86) = 570.281(4) MHz. We have also tested a recently developed and successful method for ab-initio calculation of isotope shifts in alkali-like atomic systems against this measurement, and our initial result of Delta-nu_calc^(88,86) = 457(28) MHz is also presented. To our knowledge, this is the first high precision measurement and calculation of that isotope shift. While the measurement and the calculation are in broad agreement, there is a clear discrepancy between them, and we believe that the specific mass shift was underestimated in our calculation. Our measurement provides a stringent test for further refinements of theoretical isotope shift calculation methods for atomic systems with a single valence electron

Two New and Two Poorly Known Species of Ancistrum (Ciliophora, Scuticociliatia, Thigmotrichida) Parasitizing Marine Molluscs from Chinese Coastal Waters of the Yellow Sea

The file attached is the Published/publisher’s pdf version of the article

Complete and safe resection of challenging retroperitoneal tumors: anticipation of multi-organ and major vascular resection and use of adjunct procedures.

BackgroundRetroperitoneal tumors are often massive and can involve adjacent organs and/or vital structures, making them difficult to resect. Completeness of resection is within the surgeon's control and critical for long-term survival, particularly for malignant disease. Few studies directly address strategies for complete and safe resection of challenging retroperitoneal tumors.MethodsFifty-six patients representing 63 cases of primary or recurrent retroperitoneal tumor resection between 2004-2009 were identified and a retrospective chart review was performed. Rates of complete resection, use of adjunct procedures, and perioperative complications were recorded.ResultsIn 95% of cases, complete resection was achieved. Fifty-eight percent of these cases required en bloc multi-organ resection, and 8% required major vascular resection. Complete resection rates were higher for primary versus recurrent disease. Adjunct procedures (ureteral stents, femoral nerve monitoring, posterior laminotomy, etc.) were used in 54% of cases. Major postoperative complications occurred in 16% of cases, and one patient died (2% mortality).ConclusionsComplete resection of challenging retroperitoneal tumors is feasible and can be done safely with important pre- and intraoperative considerations in mind

Elastic Deformation of Polycrystals

We propose a framework to model elastic properties of polycrystals by coupling crystal orientational degrees of freedom with elastic strains. Our model encodes crystal symmetries and takes into account explicitly the strain compatibility induced long-range interaction between grains. The coupling of crystal orientation and elastic interactions allows for the rotation of individual grains by an external load. We apply the model to simulate uniaxial tensile loading of a 2D polycrystal within linear elasticity and a system with elastic anharmonicities that describe structural phase transformations. We investigate the constitutive response of the polycrystal and compare it to that of single crystals with crystallographic orientations that form the polycrystal.Comment: 4 pages, 4 ps figure