10,815 research outputs found
Flight test of navigation and guidance sensor errors measured on STOL approaches
Navigation and guidance sensor error characteristics were measured during STOL approach-flight investigations. Data from some of the state sensors of a digital avionics system were compared to corresponding outputs from an inertial navigation system. These sensors include the vertical gyro, compass, and accelerometers. Barometric altimeter data were compared to altitude measured by a tracking radar. Data were recorded with the Augmentor Wing Jet STOL Research Aircraft parked and in flight
A flight investigation of a 4D area navigation system concept for STOL aircraft in the terminal area
A digital avionics system referred to as STOLAND was test flown in the NASA CV-340 aircraft to obtain performance data for time controlled guidance in the manual flight director mode. The advanced system components installed in the cockpit included an electronic attitude director indicator and an electronic multifunction display. Navigation guidance and control computations were performed on a digital computer. A detailed 4D area navigation systems description is given. The pilot/system interface and systems operation and performance are also described. Approach flightpaths were flown which included a 180 deg turn and a 1-min, 5 deg straight-in approach to 30 m altitude, at which point go-around was initiated. Results are presented for 19 approaches
Mechanisms of interpersonal sway synchrony and stability
Here we explain the neural and mechanical mechanisms responsible for synchronizing sway and improving postural control during physical contact with another standing person. Postural control processes were modelled using an inverted pendulum under continuous feedback control. Interpersonal interactions were simulated either by coupling the sensory feedback loops or by physically coupling the pendulums with a damped spring. These simulations precisely recreated the timing and magnitude of sway interactions observed empirically. Effects of firmly grasping another person's shoulder were explained entirely by the mechanical linkage. This contrasted with light touch and/or visual contact, which were explained by a sensory weighting phenomenon; each person's estimate of upright was based on a weighted combination of veridical sensory feedback combined with a small contribution from their partner. Under these circumstances, the model predicted reductions in sway even without the need to distinguish between self and partner motion. Our findings explain the seemingly paradoxical observation that touching a swaying person can improve postural control.This work was supported by two BBSRC grants (BB/100579X/1 and an Industry Interchange Award)
Uniaxial and biaxial soft deformations of nematic elastomers
We give a geometric interpretation of the soft elastic deformation modes of
nematic elastomers, with explicit examples, for both uniaxial and biaxial
nematic order. We show the importance of body rotations in this non-classical
elasticity and how the invariance under rotations of the reference and target
states gives soft elasticity (the Golubovic and Lubensky theorem). The role of
rotations makes the Polar Decomposition Theorem vital for decomposing general
deformations into body rotations and symmetric strains. The role of the square
roots of tensors is discussed in this context and that of finding explicit
forms for soft deformations (the approach of Olmsted).Comment: 10 pages, 10 figures, RevTex, AmsTe
Yang-Mills theory for bundle gerbes
Given a bundle gerbe with connection on an oriented Riemannian manifold of
dimension at least equal to 3, we formulate and study the associated Yang-Mills
equations. When the Riemannian manifold is compact and oriented, we prove the
existence of instanton solutions to the equations and also determine the moduli
space of instantons, thus giving a complete analysis in this case. We also
discuss duality in this context.Comment: Latex2e, 7 pages, some typos corrected, to appear in J. Phys. A:
Math. and Ge
A method for determining landing runway length for a STOL aircraft
Based on data obtained from flight tests of the augmentor wing jet STOL research aircraft, a method is proposed for determining the length of the landing runway for powered-lift STOL aircraft. The suggested method determines runway landing length by summing three segments: the touchdown-dispersion distance, the transition distance from touchdown to application of brakes, and the stopping distance after brakes are applied. It is shown how the landing field length can be reduced either through improved autoland system design or by providing the pilot with appropriate information to allow him to identify a "low probability" long or short landing and to execute a go-around. The proposed method appears to determine a safe runway landing length for the STOL application and offers the potential for reducing runway length if great emphasis is placed on a short-runway capability. FAR Parts 25 and 121 appear conservative and suitable for the situation where no great emphasis is placed on reducing the runway length requirement
Three-dimensional Simulations of Accretion to Stars with Complex Magnetic Fields
Disk accretion to rotating stars with complex magnetic fields is investigated
using full three-dimensional magnetohydrodynamic (MHD) simulations. The studied
magnetic configurations include superpositions of misaligned dipole and
quadrupole fields and off-centre dipoles. The simulations show that when the
quadrupole component is comparable to the dipole component, the magnetic field
has a complex structure with three major magnetic poles on the surface of the
star and three sets of loops of field lines connecting them. A significant
amount of matter flows to the quadrupole "belt", forming a ring-like hot spot
on the star. If the maximum strength of the magnetic field on the star is
fixed, then we observe that the mass accretion rate, the torque on the star,
and the area covered by hot spots are several times smaller in the
quadrupole-dominant cases than in the pure dipole cases. The influence of the
quadrupole component on the shape of the hot spots becomes noticeable when the
ratio of the quadrupole and dipole field strengths , and
becomes dominant when . In the case of an off-centre dipole
field, most of the matter flows through a one-armed accretion stream, forming a
large hot spot on the surface, with a second much smaller secondary spot. The
light curves may have simple, sinusoidal shapes, thus mimicking stars with pure
dipole fields. Or, they may be complex and unusual. In some cases the light
curves may be indicators of a complex field, in particular if the inclination
angle is known independently. We also note that in the case of complex fields,
magnetospheric gaps are often not empty, and this may be important for the
survival of close-in exosolar planets.Comment: 13 pages, 21 figures, accepted for publication in MNRA
Determination of surface resistance and magnetic penetration depth of superconducting YBa2Cu3O(7-delta) thin films by microwave power transmission measurements
A novel waveguide power transmission measurement technique was developed to extract the complex conductivity of superconducting thin films at microwave frequencies. The microwave conductivity was taken of two laser ablated YBa2Cu3O(7-delta) thin films on LaAlO3 with transition temperatures of approx. 86.3 and 82 K, respectively, in the temperature range 25 to 300 K. From the conductivity values, the penetration depth was found to be approx. 0.54 and 0.43 micron, and the surface resistance (R sub s) to be approx. 24 and 36 micro-Ohms at 36 GHz and 76 K for the two films under consideration. The R sub s values were compared with those obtained from the change in the Q-factor of a 36 GHz Te sub 011-mode (OFHC) copper cavity by replacing one of its end walls with the superconducting sample. This technique allows noninvasive characterization of high transition temperature superconducting thin films at microwave frequencies
Millimeter wave transmission studies of YBa2Cu3O7-delta thin films in the 26.5 to 40.0 GHz frequency range
Millimeter wave transmission measurements through YBa2Cu3O(7-delta) thin films on MgO, ZrO2 and LaAlO3 substrates, are reported. The films (approx. 1 micron) were deposited by sequential evaporation and laser ablation techniques. Transition temperatures T sub c, ranging from 89.7 K for the Laser Ablated film on LaAlO3 to approximately 72 K for the sequentially evaporated film on MgO, were obtained. The values of the real and imaginary parts of the complex conductivity, sigma 1 and sigma 2, are obtained from the transmission data, assuming a two fluid model. The BCS approach is used to calculate values for an effective energy gap from the obtained values of sigma sub 1. A range of gap values from 2 DELTA o/K sub B T sub c = 4.19 to 4.35 was obtained. The magnetic penetration depth is evaluated from the deduced values of sigma 2. These results are discussed together with the frequency dependence of the normalized transmission amplitude, P/P sub c, below and above T sub c
Double precision trajectory program /DPTRAJ 2.2C/
Four part program computes trajectory of space probe moving in solar system and subject to variety of forces
- …