357 research outputs found
Numerical analysis of thermo-hydro-mechanical (THM) processes in the clay based material
Clay formations are investigated worldwide as potential host rock for the deep geological disposal of high-level radioactive waste (HLW). Usually bentonite is preferred as the buffer and backfill material in the disposal system. In the disposal of HLW, heat emission is one of the most important issues as it can generate a series of complex thermo-hydro-mechanical (THM) processes in the surrounding materials and thus change the material properties. In the context of safety assessment, it is important to understand the thermally induced THM interactions and the associated change in material properties. In this work, the thermally induced coupled THM behaviours in the clay host rock and in the bentonite buffer as well as the corresponding coupling effects among the relevant material properties are numerically analysed.
A coupled non-isothermal Richards flow mechanical model and a non-isothermal multiphase flow model were developed based on the scientific computer codes OpenGeoSys (OGS). Heat transfer in the porous media is governed by thermal conduction and advective flow of the pore fluids. Within the hydraulic processes, evaporation, vapour diffusion, and the unsaturated flow field are considered. Darcy’s law is used to describe the advective flux of gas and liquid phases. The relative permeability of each phase is considered. The elastic deformation process is modelled by the generalized Hooke’s law complemented with additional strain caused by swelling/shrinkage behaviour and by temperature change. In this study, special attention has been paid to the analysis of the thermally induced changes in material properties. The strong mechanical and hydraulic anisotropic properties of clay rock are described by a transversely isotropic mechanical model and by a transversely isotropic permeability tensor, respectively. The thermal anisotropy is described by adoption of the bedding-orientation-dependent thermal conductivity. The dependency of the thermal conductivity on the degree of water saturation, the dependency of the thermal effects on the water retention behaviour, and the dependency of the effects of the pore pressure variation on the permeability and the anisotropic swelling/shrinkage behaviour have been intensively analysed and the corresponding numerical models to consider those coupling effects have been developed.
The developed numerical model has been applied to simulate the laboratory and in situ heating experiments on the bentonite and clay rock at different scales. Firstly the laboratory heating experiment on Callovo-Oxfordian Clay (COX) and the laboratory long-term heating and hydration experiment on MX80 pellets were simulated. Based on the knowledge from the numerical analysis of the laboratory experiments, a 1:2 scale in situ heating experiment of an integrated system of the bentonite engineered barrier system (EBS) in the Opalinus Clay host rock was simulated. All the relevant operation phases were considered in the modelling. Besides, the modelling was extended to 50 years after the heat shut-down with the aim of predicting the long-term behaviours. Additionally, variation calculations were carried out to investigate the effects of the storage capacity of the Opalinus Clay on the thermally induced hydraulic response. In the long-term modelling, the effects of different saturated water permeabilities of buffer material on the resaturation process were analysed.
Based on the current researches and model developments, the observed THM behaviours of the bentonite buffer and the clay rock, that is, the measured evolution of temperature, pore pressure, humidity, swelling pressure, and so on in the laboratory and in situ experiments can be reproduced and interpreted well. It is proved that by using both a non-isothermal multiphase flow model and a non-isothermal Richards flow model combined with the corresponding thermal and mechanical models, the major THM behaviours can be captured. It is validated that the developed model is able to simulate the relevant coupled THM behaviours of clayey material under the well-defined laboratory conditions as well as under the complex natural disposal conditions
Editorial: Omics in respiratory virus infectious diseases: integrating multi-omics to reveal data characteristics and mechanisms for the diagnosis and treatment of disease
Micro-feature-motivated numerical analysis of the coupled bio-chemo-hydro-mechanical behaviour in MICP
A coupled bio-chemo-hydro-mechanical model (BCHM) is developed to investigate the permeability reduction and stiffness improvement in soil by microbially induced calcite precipitation (MICP). Specifically, in our model based on the geometric method a link between the micro- and macroscopic features is generated. This allows the model to capture the macroscopic material property changes caused by variations in the microstructure during MICP. The developed model was calibrated and validated with the experimental data from different literature sources. Besides, the model was applied in a scenario simulation to predict the hydro-mechanical response of MICP-soil under continuous biochemical, hydraulic and mechanical treatments. Our modelling study indicates that for a reasonable prediction of the permeability reduction and stiffness improvement by MICP in both space and time, the coupled BCHM processes and the influences from the microstructural aspects should be considered. Due to its capability to capture the dynamic BCHM interactions in flexible settings, this model could potentially be adopted as a designing tool for real MICP applications. © 2022, The Author(s)
Coherent structures in the breakdown bubble of a vortex flow
Helical structures downstream of the breakdown-bubble of the Grabowski vortex profile at Reynolds numbers Re< or = 500 have been extensively studied through stability analysis in the literature. However, the low-frequency coherent structures inside the bubble, which have been observed in experiments, were not predicted by the stability approach. In the present work, asymptotic stabilities of the Grabowski vortex flow at Re < or = 1000 are carried out to compare against previous works, and then the linear optimal inflow perturbation and the corresponding outcome are studied to unveil the dynamics inside the bubble. It is found that low frequency inflow perturbations penetrate the bubble and are amplified to coherent structures, while high frequency perturbations are convected around the border of the bubble. These linearised results agree well with previous experimental observations and are validated by direct numerical simulations
Topic and Role Discovery in Social Networks
Previous work in social network analysis (SNA) has modeled the existence of links from one entity to another, but not the language content or topics on those links. We present the Author- Recipient-Topic (ART) model for social network analysis, which learns topic distributions based on the direction-sensitive messages sent between entities. The model builds on Latent Dirichlet Allocation (LDA) and the Author-Topic (AT) model, adding the key attribute that distribution over topics is conditioned distinctly on both the sender and recipient—steering the discovery of topics according to the relationships between people. We give results on both the Enron email corpus and a researcher’s email archive, providing evidence not only that clearly relevant topics are discovered, but that the ART model better predicts people’s roles
Reap success from persistence
The road to success is long and arduous. Almost all Nobel prize laureates experienced tremendous efforts and countless failures before they made their scientific breakthroughs. Hypothesis-driven, independent and critical thinking, passion, repeated experiments and repetitive failures and running in circles on the entire scientific process finally approved their hypotheses
System of ultrasonic non-destructive testing of carbon fiber composite defects
In this article a non-destructive detection software system was firstly established using Lab View and MATLAB and then a test was carried out on the application of the software system in ultrasonic non-destructive detection to verify its adaptability in detection of defects of carbon fibre composite and analyze the advantages and limitations of the detection system
- …