221 research outputs found
A New Optical Model for Photomultiplier Tubes
It is critical to construct an accurate optical model of photomultiplier
tubes (PMTs) in many applications to describe the angular and spectral
responses of the photon detection efficiency (PDE) of the PMTs in their working
media. In this study, we propose a new PMT optical model to describe both light
interactions with the PMT window and optical processes inside PMTs with
reasonable accuracy based on the optics theory and a GEANT4-based simulation
toolkit. The proposed model builds a relationship between the PDE and the
underlying processes that the PDE relies on. This model also provides a tool to
transform the PDE measured in one working medium (like air) to the PDE in other
media (like water, liquid scintillator, etc). Using two 20" MCP-PMTs and one
20" dynode PMT, we demonstrate a complete procedure to obtain the key
parameters used in the model from experimental data, such as the optical
properties of the antireflective coating and photocathode of the three PMTs.
The proposed model can effectively reproduce the angular responses of the
quantum efficiency of PMTs, even though an ideally uniform photocathode is
assumed in the model. Interestingly, the proposed model predicts a similar
level () of light yield excess observed in the experimental data
of many liquid scintillator-based neutrino detectors, compared with that
predicted at the stage of detector design. However, this excess has never been
explained, and the proposed PMT model provides a good explanation for it, which
highlights the imperfections of PMT models used in their detector simulations
On the even permutation polytope
AbstractWe consider the convex hull of the even permutations on a set of n elements. We define a class of valid inequalities and prove that they induce a large class of distinct facets of the polytope. Using the inequalities, we characterize the polytope for n=4, and we confirm a conjecture of Brualdi and Liu that, unlike the convex hull of all permutations, this polytope cannot be described as the solution set of polynomially many linear inequalities. We also discuss the difficulty of determining whether a given point is in the polytope
Single Machine Scheduling with Release Dates
We consider the scheduling problem of minimizing the average weighted completion time of n jobs with release dates on a single machine. We first study two linear programming relaxations of the problem, one based on a time-indexed formulation, the other on a completiontime formulation. We show their equivalence by proving that a O(n log n) greedy algorithm leads to optimal solutions to both relaxations. The proof relies on the notion of mean busy times of jobs, a concept which enhances our understanding of these LP relaxations. Based on the greedy solution, we describe two simple randomized approximation algorithms, which are guaranteed to deliver feasible schedules with expected objective value within factors of 1.7451 and 1.6853, respectively, of the optimum. They are based on the concept of common and independent a-points, respectively. The analysis implies in particular that the worst-case relative error of the LP relaxations is at most 1.6853, and we provide instances showing that it is at least e/(e - 1) 1.5819. Both algorithms may be derandomized, their deterministic versions running in O(n2 ) time. The randomized algorithms also apply to the on-line setting, in which jobs arrive dynamically over time and one must decide which job to process without knowledge of jobs that will be released afterwards
A simplified frailty index and nomogram to predict the postoperative complications and survival in older patients with upper urinary tract urothelial carcinoma
PurposeThis study was designed to investigate the clinical value of a simplified five-item frailty index (sFI) for predicting short- and long-term outcomes in older patients with upper urinary tract urothelial carcinoma (UTUC) patients after radical nephroureterectomy (RNU).MethodThis retrospective study included 333 patients (aged ≥65 years) with UTUC. Patients were classified into five groups: 0, 1, 2, 3, and 3+, according to sFI score. The variable importance and minimum depth methods were used to screen for significant variables, and univariable and multivariable logistic regression models applied to investigated the relationships between significant variables and postoperative complications. Survival differences between groups were analyzed using Kaplan-Meier plots and log-rank tests. Cox proportional hazards regression was used to evaluate risk factors associated with overall survival (OS) and cancer-specific survival (CSS). Further, we developed a nomogram based on clinicopathological features and the sFI. The area under the curve (AUC), Harrel’s concordance index (C-index), calibration curve, and decision curve analysis (DCA) were used to evaluate the nomogram.ResultOf 333 cases identified, 31.2% experienced a Clavien-Dindo grade of 2 or greater complication. Random forest–logistic regression modeling showed that sFI significantly influenced the incidence of postoperative complications in older patients (AUC= 0.756). Compared with patients with low sFI score, those with high sFI scores had significantly lower OS and CSS (p < 0.001). Across all patients, the random survival forest–Cox regression model revealed that sFI score was an independent prognostic factor for OS and CSS, with AUC values of 0.815 and 0.823 for predicting 3-year OS and CSS, respectively. The nomogram developed was clinically valuable and had good ability to discriminate abilities for high-risk patients. Further, we developed a survival risk classification system that divided all patients into high-, moderate-, and low-risk groups based on total nomogram points for each patient.ConclusionA simple five-item frailty index may be considered a prognostic factor for the prognosis and postoperative complications of UTUC following RNU. By using this predictive model, clinicians may increase their accuracy in predicting complications and prognosis and improve preoperative decision-making
Clusterin confers gmcitabine resistance in pancreatic cancer
<p>Abstract</p> <p>Objective</p> <p>To measure clusterin expression in pancreatic cancer tissues and cell lines and to evaluate whether clusterin confers resistance to gmcitabine in pancreatic cancer cells.</p> <p>Methods</p> <p>Immunohistochemistry for clusterin was performed on 50 primary pancreatic cancer tissues and 25 matched backgrounds, and clusterin expression in 5 pancreatic cancer cell lines was quantified by Western blot and PT-PCR. The correlation between clusterin expression level and gmcitabine IC50 in pancreatic cancer cell lines was evaluated. The effect of an antisense oligonucleotide (ASO) against clusterin(OGX-011) on gmcitabine resistance was evaluated by MTT assays. Xenograft model was used to demonstrate tumor growth.</p> <p>Results</p> <p>Pancreatic cancer tissues expressed significantly higher levels of clusterin than did normal pancreatic tissues (<it>P </it>< 0.01). Clusterin expression levels were correlated with gmcitabine resistance in pancreatic cancer cell lines, and OGX-011 significantly decreased BxPc-3 cells resistance to gmcitabine (<it>P </it>< 0.01). <it>In vivo </it>systemic administration of AS clusterin and gmcitabine significantly decreased the s.c. BxPC-3 tumor volume compared with mismatch control ODN plus gmcitabine.</p> <p>Conclusion</p> <p>Our finding that clusterin expression was significantly higher in pancreatic cancer than in normal pancreatic tissues suggests that clusterin may confer gmcitabine resistance in pancreatic cancer cells.</p
Development of a real-time loop-mediated isothermal amplification method for monitoring Pseudomonas lurida in raw milk throughout the year of pasture
IntroductionThe psychrophilic bacterium Pseudomonas lurida (P. lurida) and its thermostable alkaline proteases can seriously damage raw milk quality.MethodsIn this study, specific primers were designed for P. lurida’s gyrB and aprX genes, and a real-time loop-mediated isothermal amplification (RealAmp) rapid detection method was developed for the early monitoring of P. lurida and its proteases in raw milk. A phylogenetic tree of the gyrB and aprX genes of P. lurida was constructed to analyze the homology of the design sequence of the RealAmp primer. The DNA of 2 strains of P. lurida and 44 strains of non-P. lurida were detected via RealAmp to analyze the specificity of the primer.ResultsIt was found that aprX-positive proteases were produced by P. lurida-positive strains only when Pseudomonas fluorescens was negative. The dissociation temperatures of gyrB and aprX in the RealAmp-amplified products were approximately 85.0°C and 90.0°C, respectively. Moreover, DNA was detected through a 10-fold dilution of P. lurida in a pure bacterial solution and artificially contaminated skimmed milk. The limit of detection of P. lurida DNA copy number in the pure bacterial solution was 8.6 copies/μL and that in the 10% skimmed milk was 5.5 copies/μL. Further, 144 raw milk samples throughout the year from three farms in Hebei province were analyzed using RealAmp. The highest detection rate of P. lurida was 56% in the first and third quarters, and that of proteases was 36% in the second quarter. The detection rates of P. lurida and its proteases were the highest in samples collected from pasture 2 (52 and 46%, respectively), and the ability of P. lurida to produce proteases reached 88%.DiscussionIn conclusion, RealAmp established an early and rapid method for the detection of P. lurida and its proteases in raw milk samples, allowing the identification and control of contamination sources in a timely manner to ensure the quality of milk and dairy products
Tunable hysteresis effect for perovskite solar cells
Perovskite solar cells (PSCs) usually suffer from a hysteresis effect in current–voltage measurements,
which leads to an inaccurate estimation of the device e
fficiency. Although ion migration, charge trapping/
detrapping, and accumulation have been proposed as a b
asis for the hysteresis, the
origin of the hysteresis
has not been apparently unraveled. Herein we reporte
d a tunable hysteresis effect based uniquely on open-
circuit voltage variations in printable mesos
copic PSCs with a simplified triple-layer TiO
2
/ZrO
2
/carbon
architecture. The electrons are collected by the compact TiO
2
/mesoporous TiO
2
(c-TiO
2
/mp-TiO
2
)bilayer,
and the holes are collected by the carbon layer. By adj
usting the spray deposition cycles for the c-TiO
2
layer
andUV-ozonetreatment,weachievedhysteresis-norm
al, hysteresis-free, and hysteresis-inverted PSCs.
Such unique trends of tunable hysteresis are anal
yzed by considering the polarization of the TiO
2
/perovskite
interface, which can accumulate positive charges reversibly. Successfully tuning of the hysteresis effect
clarifies the critical importance of the c-TiO
2
/perovskite interface in controlling the hysteretic trends
observed, providing important insights towards the understanding of this rapidly developing photovoltaic
technology
- …