Effects of Mach number on turbulent separation behaviours induced by blunt fin

An experimental study of the interaction between shock wave and turbulent boundary layer induced by blunt fin has been carried out at M-infinity = 7.8 using oil flow visualization and simultaneous measurements of fluctuating wall pressure and heat transfer. This paper presents the effects of Mach number on turbulent separation behaviours induced by blunt fin

Impact of the Kuroshio intrusion on the nutrient inventory in the upper northern South China Sea: insights from an isopycnal mixing model

Based on four cruises covering a seasonal cycle in 2009-2011, we examined the impact of the Kuroshio intrusion, featured by extremely oligotrophic waters, on the nutrient inventory in the central northern South China Sea (NSCS). The nutrient inventory in the upper 100m of the water column in the study area ranged from similar to 200 to similar to 290 mmol m(-2) for N+N (nitrate plus nitrite), from similar to 13 to similar to 24 mmol m(-2) for soluble reactive phosphate and from similar to 210 to similar to 430 mmol m(-2) for silicic acid. The nutrient inventory showed a clear seasonal pattern with the highest value appearing in summer, while the N+N inventory in spring and winter had a reduction of similar to 13 and similar to 30 %, respectively, relative to that in summer. To quantify the extent of the Kuroshio intrusion, an isopycnal mixing model was adopted to derive the proportional contribution of water masses from the SCS proper and the Kuroshio along individual isopycnal surfaces. The derived mixing ratio along the isopycnal plane was then employed to predict the genuine gradients of nutrients under the assumption of no biogeochemical alteration. These predicted nutrient concentrations, denoted as N-m, are solely determined by water mass mixing. Results showed that the nutrient inventory in the upper 100m of the NSCS was overall negatively correlated to the Kuroshio water fraction, suggesting that the Kuroshio intrusion significantly influenced the nutrient distribution in the SCS and its seasonal variation. The difference between the observed nutrient concentrations and their corresponding Nm allowed us to further quantify the nutrient removal/addition associated with the biogeochemical processes on top of the water mass mixing. We revealed that the nutrients in the upper 100m of the water column had a net consumption in both winter and spring but a net addition in fall.Based on four cruises covering a seasonal cycle in 2009-2011, we examined the impact of the Kuroshio intrusion, featured by extremely oligotrophic waters, on the nutrient inventory in the central northern South China Sea (NSCS). The nutrient inventory in the upper 100m of the water column in the study area ranged from similar to 200 to similar to 290 mmol m(-2) for N+N (nitrate plus nitrite), from similar to 13 to similar to 24 mmol m(-2) for soluble reactive phosphate and from similar to 210 to similar to 430 mmol m(-2) for silicic acid. The nutrient inventory showed a clear seasonal pattern with the highest value appearing in summer, while the N+N inventory in spring and winter had a reduction of similar to 13 and similar to 30 %, respectively, relative to that in summer. To quantify the extent of the Kuroshio intrusion, an isopycnal mixing model was adopted to derive the proportional contribution of water masses from the SCS proper and the Kuroshio along individual isopycnal surfaces. The derived mixing ratio along the isopycnal plane was then employed to predict the genuine gradients of nutrients under the assumption of no biogeochemical alteration. These predicted nutrient concentrations, denoted as N-m, are solely determined by water mass mixing. Results showed that the nutrient inventory in the upper 100m of the NSCS was overall negatively correlated to the Kuroshio water fraction, suggesting that the Kuroshio intrusion significantly influenced the nutrient distribution in the SCS and its seasonal variation. The difference between the observed nutrient concentrations and their corresponding Nm allowed us to further quantify the nutrient removal/addition associated with the biogeochemical processes on top of the water mass mixing. We revealed that the nutrients in the upper 100m of the water column had a net consumption in both winter and spring but a net addition in fall

Effects of cultivation years on effective constituent content of Fritillaria pallidiflora Schernk

Fritillaria pallidiflora Schrenk has been treasured in traditional classic medicine as an antitussive, antiasthmatic and expectorant for hundreds of years. With gradually decreasing wild F. pallidiflora resources, the herb can no longer satisfy the demand. Artificial cultivation is one of the most effective ways to solve the contradiction between supply and demand in the medicinal material market. During the growth of Rhizomes medicinal plants, root biomass and active ingredient content showed dynamic accumulated variation with increasing cultivation years. Up to now, hardly any attempts have been made to investigate the relationship between quality and cultivation years of F. pallidiflora. Therefore, in this paper, we determined the optimum harvesting time by comparing biomass and biological characteristics of F. pallidiflora at different cultivation times. High-performance liquid chromatography with evaporative light scattering detection and phenol-sulfuric acid visible spectrophotometry was performed to determine imperialine and polysaccharide content of F. pallidiflora bulbs. From year 1 to 6 of cultivation, we observed an upward trend in plant height, diameter and dry weight of F. pallidiflora, while water content decreased. Plant height and dry weight increased remarkably during the fourth year of cultivation. The content of imperialine and polysaccharide of F. pallidiflora bulbs, on the other hand, showed an upward trend from year 1 to 3, after which it decreased from year 3 to 6. By comparing plant growth, biomass development and the accumulation of imperialine and polysaccharide, the best harvesting time of F. pallidiflora was determined to be after 4 years of cultivation. Our results showed that it is possible to establish a safe, effective, stable and controllable production process, which could play an important role in achieving sustainable utilization of F. pallidiflora resources.Fritillaria pallidiflora Schrenk has been treasured in traditional classic medicine as an antitussive, antiasthmatic and expectorant for hundreds of years. With gradually decreasing wild F. pallidiflora resources, the herb can no longer satisfy the demand. Artificial cultivation is one of the most effective ways to solve the contradiction between supply and demand in the medicinal material market. During the growth of Rhizomes medicinal plants, root biomass and active ingredient content showed dynamic accumulated variation with increasing cultivation years. Up to now, hardly any attempts have been made to investigate the relationship between quality and cultivation years of F. pallidiflora. Therefore, in this paper, we determined the optimum harvesting time by comparing biomass and biological characteristics of F. pallidiflora at different cultivation times. High-performance liquid chromatography with evaporative light scattering detection and phenol-sulfuric acid visible spectrophotometry was performed to determine imperialine and polysaccharide content of F. pallidiflora bulbs. From year 1 to 6 of cultivation, we observed an upward trend in plant height, diameter and dry weight of F. pallidiflora, while water content decreased. Plant height and dry weight increased remarkably during the fourth year of cultivation. The content of imperialine and polysaccharide of F. pallidiflora bulbs, on the other hand, showed an upward trend from year 1 to 3, after which it decreased from year 3 to 6. By comparing plant growth, biomass development and the accumulation of imperialine and polysaccharide, the best harvesting time of F. pallidiflora was determined to be after 4 years of cultivation. Our results showed that it is possible to establish a safe, effective, stable and controllable production process, which could play an important role in achieving sustainable utilization of F. pallidiflora resources

Distinct but overlapping roles of LRRTM1 and LRRTM2 in developing and mature hippocampal circuits

LRRTMs are postsynaptic cell adhesion proteins that have region-restricted expression in the brain. To determine their role in the molecular organization of synapses in vivo, we studied synapse development and plasticity in hippocampal neuronal circuits in mice lacking both Lrrtm1 and Lrrtm2. We found that LRRTM1 and LRRTM2 regulate the density and morphological integrity of excitatory synapses on CA1 pyramidal neurons in the developing brain but are not essential for these roles in the mature circuit. Further, they are required for long-term-potentiation in the CA3-CA1 pathway and the dentate gyrus, and for enduring fear memory in both the developing and mature brain. Our data show that LRRTM1 and LRRTM2 regulate synapse development and function in a cell-type and developmental-stage-specific manner, and thereby contribute to the fine-tuning of hippocampal circuit connectivity and plasticity

Molecular phylogenetic analysis of key Jatropha species inferred from nrDNA ITS and chloroplast (trnL-F and rbcL) sequences

The genus Jatropha (Euphorbiaceae) contains species that are of significant economic and ornamental value. However, Jatropha breeding material is rather limited due to incomplete information regarding phylogenetic relationships among germplasm resources. Phylogenetic analyses were performed based on the internal transcribed spacer of nuclear ribosomal DNA (nrDNA ITS), two chloroplast regions (trnL-F and rbcL), and the combined (ITS+trnL-F+rbcL) dataset among twenty-five specimens representing six key Jatropha species. Phylogenetic relationships of Jatropha were well resolved between subgenus Curcas and subgenus Jatropha, and demonstrated the intermediate position of section Polymorphae among sections of both subgenera. Jatropha curcas and J. integerrima demonstrated a close phylogenetic relationship. The molecular data agreed with the morphological classification that recognized J. multifida and J. podagrica in sec. Peltatae. The distinct intraspecific divergence that occurred in J. curcas could be attributed to restricted gene flow caused by geographical isolation and different ecological conditions. Phylograms produced with trnL-F and rbcL sequence data suggested slow rates of sequence divergence among Jatropha spp., while the ITS gene tree had good resolution suggesting high genetic variation of ITS among Jatropha species

Levels and patterns of organochlorine pesticides in agricultural soils in an area of extensive historical cotton cultivation in Henan province, China

Organochlorine pesticides (OCPs) have attracted widespread concern because of their environmental persistence and toxicity. The historical influence of different agricultural land use types on soil concentrations of OCP residues was investigated by collecting a total of 52 surface soil samples from long-term cotton fields and fields with other crops in Lvdian township, Henan province, eastern central China. The concentration, composition, and possible sources of 16 OCPs were determined and a health risk assessment of these soils was conducted. Hexachlorocyclohexane (HCH), heptachlor, chlordane, and dichloro diphenyl trichloroethane plus its main metabolites (DDTs) were the most frequently detected OCPs with concentrations of 2.9-56.4 ng g(-1), 4.3-14.0 ng g(-1), 18.0-1254.4 ng g(-1), and below detection limit (BDL) -206.1 ng g(-1), respectively. Analysis of variance of p,p-DDE shows significant (P < 0.05) differences while other OCPs show no significant differences between historical cotton fields and fields containing other crops. Compositional analysis suggests that the HCH is derived mainly from the use of lindane and that there are recent inputs. Analysis of variance and compositional analysis indicate that the p,p-DDE in surface soil from long-term cotton fields is derived mainly from the aerobic biodegradation of historical residues. The sum of carcinogenic risk values of OCPs for soil samples were found to be 1.58 x 10(-6), posing a low cancer risk to the inhabitants of the region studied

Mechanical behavior and properties of hydrogen bonded graphene/polymer nano-interfaces

There is increasing evidence in literature for significant improvements in both toughness and strength of graphene-based nanocomposites through engineering their nano-interfaces with hydrogen bonds (H-bonds). However, the underlying mechanical behaviors and properties of these H-bonded interfaces at the microscopic level were still not experimentally clarified and evaluated. Herein, this work reports a study on the interfacial stress transfer between a monolayer graphene and a commonly used poly(-methyl methacrylate) (PMMA) matrix under pristine vdW and modified H-bonding interactions. A nonlinear shear-lag model considering friction beyond linear bonding was proposed to understand evolution of interfacial stresses and further identify key interfacial parameters (such as interfacial stiffness, strength, frictional stress and adhesion energy) with the aid of in situ Raman spectroscopy and atomic force microscopy. The present study can provide fundamental insight into the reinforcing mechanism and unique mechanical behavior of chemically modified graphene nano-interfaces and develop further a basis for interfacial optimal design of graphene-based high-performance nanocomposites. (C) 2016 Published by Elsevier Ltd

Designing ultrafine lamellar eutectic structure in bimodal titanium alloys by semi-solid sintering

We report on a novel approach to design typical ultrafine lamellar eutectic structure in bimodal alloys fabricated by semi-solid sintering (SSS) of a eutectic mixture. In our work ultrafine lamellar eutectic structure was implemented by controlling the phase composition of eutectic reaction and consequently by regulating the structure of eutectic reaction-induced liquid phase through varying component number. Microstructure analysis indicate that although all SSSed alloys have the same three phase constitutions of bcc beta-Ti(Fe Co) and fcc Ti-2(Co Fe) the morphology and distribution of the eutectic structure transforms from limited length and minor quantity to partial fine alternating bcc beta-Ti and bcc Ti(Fe Co) lamellae and further to typical complete ultrafine alternating continuous lamellae in the SSSed ternary Ti-Fe-Co quaternary Ti-Fe-Co-Nb and quinary Ti-Fe-Co-Nb-Al alloys. Interestingly the SSSed Ti-Fe-Co-Nb-Al alloy presents a novel bimodal microstructure of coarse fcc Ti-2(Co Fe) surrounded by an ultrafine lamellar eutectic matrix containing ultrafine bcc beta-Ti and bcc Ti(Fe Co) lamellae. This bimodal microstructure exhibits ultra-high yield strength of 2050 MPa with plasticity in compression of 19.7% which exceed published values of equivalent materials. Our results provide a novel pathway for fabricating new-structure metallic alloys for high-performance structural applications. (C) 2017 Elsevier B.V. All rights reserved.</p

c-axis preferential orientation of hydroxyapatite accounts for the high wear resistance of the teeth of black carp (Mylopharyngodon piceus)

Biological armors such as mollusk shells have long been recognized and studied for their values in inspiring novel designs of engineering materials with higher toughness and strength. However, no material is invincible and biological armors also have their rivals. In this paper, our attention is focused on the teeth of black carp (Mylopharyngodon piceus) which is a predator of shelled mollusks like snails and mussels. Nanoscratching test on the enameloid, the outermost layer of the teeth, indicates that the natural occlusal surface (OS) has much higher wear resistance compared to the other sections. Subsequent X-ray diffraction analysis reveals that the hydroxyapatite (HAp) crystallites in the vicinity of OS possess c-axis preferential orientation. The superior wear resistance of black carp teeth is attributed to the c-axis preferential orientation of HAp near the OS since the (001) surface of HAp crystal, which is perpendicular to the c-axis, exhibits much better wear resistance compared to the other surfaces as demonstrated by the molecular dynamics simulation. Our results not only shed light on the origin of the good wear resistance exhibited by the black carp teeth but are of great value to the design of engineering materials with better abrasion resistance