Cross-talk interactions of exogenous nitric oxide and sucrose modulates phenylpropanoid metabolism in yellow lupine embryo axes infected with Fusarium oxysporum

AbstractThe aim of the study was to examine cross-talk of exogenous nitric oxide (NO) and sucrose in the mechanisms of synthesis and accumulation of isoflavonoids in embryo axes of Lupinus luteus L. cv. Juno. It was verified whether the interaction of these molecules can modulate the defense response of axes to infection and development of the pathogenic fungus Fusarium oxysporum f. sp. lupini. Sucrose alone strongly stimulated a high level of genistein glucoside in axes pretreated with exogenous nitric oxide (SNP or GSNO) and non-pretreated axes. As a result of amplification of the signal coming from sucrose and GSNO, high isoflavonoids accumulation was observed (+Sn+GSNO). It needs to be stressed that infection in tissues pretreated with SNP/GSNO and cultured on the medium with sucrose (+Si+SNP/+Si+GSNO) very strongly enhances the accumulation of free isoflavone aglycones. In +Si+SNP axes phenylalanine ammonia-lyase activity was high up to 72h. As early as at 12h in +Si+SNP axes an increase was recorded in gene expression level of the specific isoflavonoid synthesis pathway. At 24h in +Si+SNP axes a very high total antioxidant capacity dependent on the pool of fast antioxidants was noted. Post-infection generation of semiquinone radicals was lower in axes with a high level of sucrose than with a deficit

Structural studies and selected physical investigations of LiCoO2 obtained by combustion synthesis

Nanocrystalline powders of LiCoO2 were synthesized using a modified solution combustion method, and the effects of the annealing temperature (450-900 degrees C) on structure and composition were investigated using various methods, including XRD, SEM, EPR, and electrical studies. It was found that, as the process temperature increases, the value of the specific surface area decreases, and, hence, the size of the crystallites increases. XRD analysis showed that phase-pure LiCoO2 material was maintained without ad-ditional phases. EPR studies revealed the presence of two Ni3+ complexes resulting from Ni impurities. The electrical properties of the studied LiCoO2 samples were investigated by using impedance spectroscopy. Comparison of the effect of annealing tempera-ture on electrical conductivity shows a very interesting behavior. As the annealing temperature increases, the DC conductivity value increases, reaching a maximum at a temperature of 500 degrees C. However, further increase in the annealing temperature causes a steady decrease in the DC conductivity.Web of Science131482147

Improvement of Tribological Properties of Metal Matrix Composites by Means of Slide Burnishing

Burnishing of metal surfaces can affect positively tribological and mechanical properties such as fatigue strength, wear resistance, contact stiffness and bearing capacity. Burnishing affects the entire surface topography, including surface roughness, radii of curvature of peaks and valleys, slope angles and more. We have studied A1Mg1SiCu (6xxx series) aluminum matrix composites with a reinforcing phase of Al2O3 which exhibits good workability but poor machinability. The second series studied was based on an AlSi alloy (A-390) reinforced with SiC – this one characterized by poor workability but good machinability. Materials have been prepared by mixing metal powders with the reinforcement, cold pressing, sintering, hot extrusion and heat treatment. We have determined surface roughness with a Hommel tester; the arithmetical mean for A1Mg1SiCu (A6061 + Al2O3) was ~1 µm before burnishing and ~0.15 mm after burnishing. We have also determined the bearing capacity at 50 % with the same tester: before burnishing 2.30 µm and 0.47 µm afterwards for A6061 + Al2O3; before 2.30 µm, afterwards 0.37 µm for A390 + SiC. Vickers microhardness at the surface with respect to the core increases 30 % for the Al2O3 containing composite and 50 % for the SiC containing composite.DOI: http://dx.doi.org/10.5755/j01.ms.19.4.2404</p

THE RADIOSTABILITY OF BETAMIPRON IN THE SOLID STATE

The influence of ionising radiation on physicochemical properties of betamipron in solid state was studied. No changes for betamipron irradiated with a dose of 25 kGy, required to attain sterility, was observed by spectroscopic and chromatographic methods. Solid betamipron has proven to be very stable on irradiation, and irradiation has been found to be a suitable method for its sterilization

Brachycorynella asparagi (Mordv.) Induced—Oxidative Stress and Antioxidative Defenses of Asparagus officinalis L.

The aim of this study was to investigate whether and to what extent oxidative stress is induced in leaves of one- and two-month-old plants of Asparagus officinalis L. cv. Argenteuil infested by Brachycorynella asparagi (Mordvilko) at a varied population size. The pest B. asparagi has been described as the most damaging species feeding on asparagus. Analyses using electron paramagnetic resonance (EPR) demonstrated generally higher concentrations of semiquinone radicals with g-values of 2.0045 ± 0.0005 and 2.0026 ± 0.0005 in Asparagus officinalis (A. officinalis) leaves after Brachycorynella asparagi (B. asparagi) infestation than in the control. Observations of leaves under a confocal microscope showed a post-infestation enhanced generation of the superoxide anion radical (O2•−) and hydrogen peroxide (H2O2) in comparison to the control. Strong fluctuations in Mn2+ ion levels detected by EPR spectroscopy versus time were detected in leaves infested by aphids, which may indicate the involvement of these ions in the control of O2•− production. An enhanced superoxide dismutase activity is an important element in leaf defense against oxidative stress. Visible symptoms were found in aphid-infested A. officinalis. Damage to leaves of one- and two-month-old A. officinalis plants by the aphid B. asparagi was dependent on the intensity, duration of infestation and plant age

Radiolytic studies of cefozopran hydrochloride in the solid state

Background: The radiation sterilization is one of the best methods for sterilizing vulnerable degradation drugs like cefozopran hydrochloride. Results: Chemical stability of radiosterylized cefozopran hydrochloride, was confirmed by spectrophotometric and chromatographic methods. EPR studies showed that radiation has created some radical defects whose concentration was no more than several dozen ppm. The antibacterial activity of cefozopran hydrochloride irradiated with a dose of 25 kGy was unaltered for Gram-positive bacteria but changed for two Gram-negative strains. The radiation sterilized cefozopran hydrochloride was not in vitro cytotoxic against human CCD39Lu normal lung fibroblast cell line. Conclusions: Cefozopran hydrochloride in solid state is not resistant to radiation sterilization and this method cannot be used for sterilization of this compound

THE RADIATION STERILIZATION OF IMIPENEM AND CILASTATIN IN THE SOLID STATE

One of the best sterilization methods for chemically unstable drugs, such as carbapenems, is irradiation. The chemical and physical properties of radiosterilized imipenem and cilastatin were analyzed using spectrophotometric and chromatographic methods. Unstable free radicals were presented in samples after irradiation; their mean lifetime was 142±64 h. The antibacterial activity of cefozopran hydrochloride irradiated with a dose of 25 kGy changed for Klebsiella pneumoniae and Escherichia coli. Imipenem and cilastatin in the solid state are not resistant to radiation sterilization; therefore, this method cannot be used for sterilization of this compound