Subtraction-noise projection in gravitational-wave detector networks

In this paper, we present a successful implementation of a subtraction-noise projection method into a simple, simulated data analysis pipeline of a gravitational-wave search. We investigate the problem to reveal a weak stochastic background signal which is covered by a strong foreground of compact-binary coalescences. The foreground which is estimated by matched filters, has to be subtracted from the data. Even an optimal analysis of foreground signals will leave subtraction noise due to estimation errors of template parameters which may corrupt the measurement of the background signal. The subtraction noise can be removed by a noise projection. We apply our analysis pipeline to the proposed future-generation space-borne Big Bang Observer (BBO) mission which seeks for a stochastic background of primordial GWs in the frequency range $\sim 0.1-1$Hz covered by a foreground of black-hole and neutron-star binaries. Our analysis is based on a simulation code which provides a dynamical model of a time-delay interferometer (TDI) network. It generates the data as time series and incorporates the analysis pipeline together with the noise projection. Our results confirm previous ad hoc predictions which say that BBO will be sensitive to backgrounds with fractional energy densities below $\Omega=10^{-16}$Comment: 54 pages, 15 figure

BBO and the Neutron-Star-Binary Subtraction Problem

The Big Bang Observer (BBO) is a proposed space-based gravitational-wave (GW) mission designed primarily to search for an inflation-generated GW background in the frequency range 0.1-1 Hz. The major astrophysical foreground in this range is gravitational radiation from inspiraling compact binaries. This foreground is expected to be much larger than the inflation-generated background, so to accomplish its main goal, BBO must be sensitive enough to identify and subtract out practically all such binaries in the observable universe. It is somewhat subtle to decide whether BBO's current baseline design is sufficiently sensitive for this task, since, at least initially, the dominant noise source impeding identification of any one binary is confusion noise from all the others. Here we present a self-consistent scheme for deciding whether BBO's baseline design is indeed adequate for subtracting out the binary foreground. We conclude that the current baseline should be sufficient. However if BBO's instrumental sensitivity were degraded by a factor 2-4, it could no longer perform its main mission. It is impossible to perfectly subtract out each of the binary inspiral waveforms, so an important question is how to deal with the "residual" errors in the post-subtraction data stream. We sketch a strategy of "projecting out" these residual errors, at the cost of some effective bandwidth. We also provide estimates of the sizes of various post-Newtonian effects in the inspiral waveforms that must be accounted for in the BBO analysis.Comment: corrects some errors in figure captions that are present in the published versio

The confinement of phonon propagation in TiAlN/Ag multilayer coatings with anomalously low heat conductivity

TiAlN/Ag multilayer coatings with a different number of bilayers and thicknesses of individual layers were fabricated by DC magnetron co-sputtering. Thermal conductivity was measured in dependence of Ag layer thickness. It was found anomalous low thermal conductivity of silver comparing to TiAlN and Ag bulk standards and TiAlN/TiN multilayers. The physical nature of such thermal barrier properties of the multilayer coatings was explained on the basis of reflection electron energy loss spectroscopy. The analysis shows that nanostructuring of the coating decreases the density of states and velocity of acoustic phonons propagation. At the same time, multiphonon channels of heat propagation degenerate. These results demonstrate that metal-dielectric interfaces in TiAlN/Ag coatings are insurmountable obstacles for acoustic phonons propagation

Parameter estimation of coalescing supermassive black hole binaries with LISA

Laser Interferometer Space Antenna (LISA) will routinely observe coalescences of supermassive black hole (BH) binaries up to very high redshifts. LISA can measure mass parameters of such coalescences to a relative accuracy of $10^{-4}-10^{-6}$, for sources at a distance of 3 Gpc. The problem of parameter estimation of massive nonspinning binary black holes using post-Newtonian (PN) phasing formula is studied in the context of LISA. Specifically, the performance of the 3.5PN templates is contrasted against its 2PN counterpart using a waveform which is averaged over the LISA pattern functions. The improvement due to the higher order corrections to the phasing formula is examined by calculating the errors in the estimation of mass parameters at each order. The estimation of the mass parameters ${\cal M}$ and $\eta$ are significantly enhanced by using the 3.5PN waveform instead of the 2PN one. For an equal mass binary of $2\times10^6M_\odot$ at a luminosity distance of 3 Gpc, the improvement in chirp mass is $\sim 11$ and that of $\eta$ is $\sim 39$. Estimation of coalescence time $t_c$ worsens by 43%. The improvement is larger for the unequal mass binary mergers. These results are compared to the ones obtained using a non-pattern averaged waveform. The errors depend very much on the location and orientation of the source and general conclusions cannot be drawn without performing Monte Carlo simulations. Finally the effect of the choice of the lower frequency cut-off for LISA on the parameter estimation is studied.Comment: 12 pages, 5 figures (eps) significant revision, accepted for publication in Phys. Rev. D. Matches with the published versio

Predictability of band-limited, high-frequency, and mixed processes in the presence of ideal low-pass filters

Pathwise predictability of continuous time processes is studied in deterministic setting. We discuss uniform prediction in some weak sense with respect to certain classes of inputs. More precisely, we study possibility of approximation of convolution integrals over future time by integrals over past time. We found that all band-limited processes are predictable in this sense, as well as high-frequency processes with zero energy at low frequencies. It follows that a process of mixed type still can be predicted if an ideal low-pass filter exists for this process.Comment: 10 page

The Effect of the LISA Response Function on Observations of Monochromatic Sources

The Laser Interferometer Space Antenna (LISA) is expected to provide the largest observational sample of binary systems of faint sub-solar mass compact objects, in particular white-dwarfs, whose radiation is monochromatic over most of the LISA observational window. Current astrophysical estimates suggest that the instrument will be able to resolve about 10000 such systems, with a large fraction of them at frequencies above 3 mHz, where the wavelength of gravitational waves becomes comparable to or shorter than the LISA arm-length. This affects the structure of the so-called LISA transfer function which cannot be treated as constant in this frequency range: it introduces characteristic phase and amplitude modulations that depend on the source location in the sky and the emission frequency. Here we investigate the effect of the LISA transfer function on detection and parameter estimation for monochromatic sources. For signal detection we show that filters constructed by approximating the transfer function as a constant (long wavelength approximation) introduce a negligible loss of signal-to-noise ratio -- the fitting factor always exceeds 0.97 -- for f below 10mHz, therefore in a frequency range where one would actually expect the approximation to fail. For parameter estimation, we conclude that in the range 3mHz to 30mHz the errors associated with parameter measurements differ from about 5% up to a factor of 10 (depending on the actual source parameters and emission frequency) with respect to those computed using the long wavelength approximation.Comment: replacement version with typos correcte

Pulsar timing arrays as imaging gravitational wave telescopes: angular resolution and source (de)confusion

Pulsar timing arrays (PTAs) will be sensitive to a finite number of gravitational wave (GW) "point" sources (e.g. supermassive black hole binaries). N quiet pulsars with accurately known distances d_{pulsar} can characterize up to 2N/7 distant chirping sources per frequency bin \Delta f_{gw}=1/T, and localize them with "diffraction limited" precision \delta\theta \gtrsim (1/SNR)(\lambda_{gw}/d_{pulsar}). Even if the pulsar distances are poorly known, a PTA with F frequency bins can still characterize up to (2N/7)[1-(1/2F)] sources per bin, and the quasi-singular pattern of timing residuals in the vicinity of a GW source still allows the source to be localized quasi-topologically within roughly the smallest quadrilateral of quiet pulsars that encircles it on the sky, down to a limiting resolution \delta\theta \gtrsim (1/SNR) \sqrt{\lambda_{gw}/d_{pulsar}}. PTAs may be unconfused, even at the lowest frequencies, with matched filtering always appropriate.Comment: 7 pages, 1 figure, matches Phys.Rev.D versio

Interface-Induced Plasmon Nonhomogeneity in Nanostructured Metal-Dielectric Planar Metamaterial

Transformations of the electronic structure in thin silver layers in metal-dielectric (TiAlN/Ag) multilayer nanocomposite were investigated by a set of electron spectroscopy techniques. Localization of the electronic states in the valence band and reduction of electron concentration in the conduction band was observed. This led to decreasing metallic properties of silver in the thin films. A critical layer thickness of 23.5 nm associated with the development of quantum effects was determined by X-ray photoelectron spectroscopy. Scanning Auger electron microscopy of characteristic energy losses provided images of plasmon localization in the Ag layers. The nonuniformity of plasmon intensities distribution near the metal-nitride interfaces was assessed experimentally

LISA detections of massive black hole inspirals: parameter extraction errors due to inaccurate template waveforms

The planned Laser Interferometer Space Antenna (LISA) is expected to detect the inspiral and merger of massive black hole binaries (MBHBs) at z <~ 5 with signal-to-noise ratios (SNRs) of hundreds to thousands. Because of these high SNRs, and because these SNRs accrete over periods of weeks to months, it should be possible to extract the physical parameters of these systems with high accuracy; for instance, for a ~ 10^6 Msun MBHBs at z = 1 it should be possible to determine the two masses to ~ 0.1% and the sky location to ~ 1 degree. However, those are just the errors due to noise: there will be additional "theoretical" errors due to inaccuracies in our best model waveforms, which are still only approximate. The goal of this paper is to estimate the typical magnitude of these theoretical errors. We develop mathematical tools for this purpose, and apply them to a somewhat simplified version of the MBHB problem, in which we consider just the inspiral part of the waveform and neglect spin-induced precession, eccentricity, and PN amplitude corrections. For this simplified version, we estimate that theoretical uncertainties in sky position will typically be ~ 1 degree, i.e., comparable to the statistical uncertainty. For the mass and spin parameters, our results suggest that while theoretical errors will be rather small absolutely, they could still dominate over statistical errors (by roughly an order of magnitude) for the strongest sources. The tools developed here should be useful for estimating the magnitude of theoretical errors in many other problems in gravitational-wave astronomy.Comment: RevTeX4, 16 pages, 2 EPS figures. Corrected typos, clarified statement

Summed Parallel Infinite Impulse Response (SPIIR) Filters For Low-Latency Gravitational Wave Detection

With the upgrade of current gravitational wave detectors, the first detection of gravitational wave signals is expected to occur in the next decade. Low-latency gravitational wave triggers will be necessary to make fast follow-up electromagnetic observations of events related to their source, e.g., prompt optical emission associated with short gamma-ray bursts. In this paper we present a new time-domain low-latency algorithm for identifying the presence of gravitational waves produced by compact binary coalescence events in noisy detector data. Our method calculates the signal to noise ratio from the summation of a bank of parallel infinite impulse response (IIR) filters. We show that our summed parallel infinite impulse response (SPIIR) method can retrieve the signal to noise ratio to greater than 99% of that produced from the optimal matched filter. We emphasise the benefits of the SPIIR method for advanced detectors, which will require larger template banks.Comment: 9 pages, 6 figures, for PR