1,015 research outputs found
Computer Assisted Planning for Curved Laser Interstitial Thermal Therapy
IEEE Laser interstitial thermal therapy (LiTT) is a minimally invasive alternative to conventional open surgery for drug-resistant focal mesial temporal lobe epilepsy (MTLE). Recent studies suggest that higher seizure freedom rates are correlated with maximal ablation of the mesial hippocampal head, whilst sparing of the parahippocampal gyrus (PHG) may reduce neuropsychological sequelae. Current commercially available laser catheters are inserted following manually planned straight-line trajectories, which cannot conform to curved brain structures, such as the hippocampus, without causing collateral damage or requiring multiple insertions. The clinical feasibility and potential of curved LiTT trajectories through steerable needles has yet to be investigated. This is the focus of our work. We propose a GPU-accelerated computer-assisted planning (CAP) algorithm for steerable needle insertions that generates optimized curved 3D trajectories with maximal ablation of the amygdalohippocampal complex and minimal collateral damage to nearby structures, while accounting for a variable ablation diameter (). Simulated trajectories and ablations were performed on 5 patients with mesial temporal sclerosis (MTS), which were identified from a prospectively managed database. The algorithm generated obstacle-free paths with significantly greater target area ablation coverage and lower PHG ablation variance compared to straight line trajectories. The presented CAP algorithm returns increased ablation of the amygdalohippocampal complex, with lower patient risk scores compared to straight-line trajectories. This is the first clinical application of preoperative planning for steerable needle based LiTT. This study suggests that steerable needles have the potential to improve LiTT procedure efficacy whilst improving the safety and should thus be investigated further
A Compromise between Neutrino Masses and Collider Signatures in the Type-II Seesaw Model
A natural extension of the standard gauge
model to accommodate massive neutrinos is to introduce one Higgs triplet and
three right-handed Majorana neutrinos, leading to a neutrino mass
matrix which contains three sub-matrices ,
and . We show that three light Majorana neutrinos (i.e., the mass
eigenstates of , and ) are exactly massless in this
model, if and only if
exactly holds. This no-go theorem implies that small but non-vanishing neutrino
masses may result from a significant but incomplete cancellation between
and terms in the Type-II
seesaw formula, provided three right-handed Majorana neutrinos are of TeV and experimentally detectable at the LHC. We propose three simple
Type-II seesaw scenarios with the flavor symmetry to
interpret the observed neutrino mass spectrum and neutrino mixing pattern. Such
a TeV-scale neutrino model can be tested in two complementary ways: (1)
searching for possible collider signatures of lepton number violation induced
by the right-handed Majorana neutrinos and doubly-charged Higgs particles; and
(2) searching for possible consequences of unitarity violation of the neutrino mixing matrix in the future long-baseline neutrino oscillation
experiments.Comment: RevTeX 19 pages, no figure
Haemophagocytic lymphohistiocytosis: An uncommon clinical presentation of tuberculosis
published_or_final_versio
Static behaviour of two-tiered Dou-Gong system reinforced by super-elastic alloy
Dou-Gong system in Asian timber structures play an important role in resisting seismic action. Traditional carpentry in Asia uses timber pegs to connect components which enables relative movement between components, and hence provide friction to dissipate energy in an earthquake. This method however has some short falls such as inadequate stiffness to resist large lateral force and therefore the structures tend to exhibit permanent deformation after the earthquakes. This study proposes a new technique by using super-elastic alloy bars to replace the conventional wooden peg connections to enhance the seismic performance of the structures. Static push-over experiments were conducted on full scaled two-tiered Dou-Gong systems and the high-strength steel and conventional wood pegs as benchmarks. The ultimate stiffness of Dou-Gong system has shown increase by using both high-strength steel and super-elastic alloy bars, but only super-elastic alloy can provide a consistent high damping ratio. This technique also involves pre-strain the super-elastic alloy and the outcomes of this series of experiments have shown that pre-strain in the super-elastic alloy can significantly increase the damping ratio in the structure and hence more energy is dissipated. The results of this paper can be used in the projects of timber structures with Dou-Gong system
Band-gap expansion in the surface-localized electronic structure of MoS2(0002)
The electronic band structure of MoS2 single crystals has been investigated using angle-resolved photoelectron spectroscopy and first-principles calculations. The orbital symmetry and k dispersion of these electronic states responsible for the direct and the indirect electronic band gaps have been unambiguously determined. By experimentally probing an increase of the electronic band gap, we conclude that a MoS2 (0002) surface localized state exists just below the valence band maximum at the Gamma point. This electronic state originates from the sulfur planes within the topmost layer. Our comprehensive study addresses the surface electronic structure of MoS2 and the role of van der Waals interlayer interactions.open112625Nsciescopu
Recommended from our members
High-efficiency photovoltaic cells with wide optical band gap polymers based on fluorinated phenylene-alkoxybenzothiadiazole
A series of semi-crystalline, wide band gap (WBG) photovoltaic polymers were synthesized with varying number and topology of fluorine substituents. To decrease intramolecular charge transfer and to modulate the resulting band gap of D-A type copolymers, electron-releasing alkoxy substituents were attached to electron-deficient benzothiadiazole (A) and electron-withdrawing fluorine atoms (0-4F) were substituted onto a 1,4-bis(thiophen-2-yl)benzene unit (D). Intra- and/or interchain noncovalent Coulombic interactions were also incorporated into the polymer backbone to promote planarity and crystalline intermolecular packing. The resulting optical band gap and the valence level were tuned to 1.93-2.15 eV and -5.37 to -5.67 eV, respectively, and strong interchain organization was observed by differential scanning calorimetry, high-resolution transmission electron microscopy and grazing incidence X-ray scattering measurements. The number of fluorine atoms and their position significantly influenced the photophysical, morphological and optoelectronic properties of bulk heterojunctions (BHJs) with these polymers. BHJ photovoltaic devices showed a high power conversion efficiency (PCE) of up to 9.8% with an open-circuit voltage of 0.94-1.03 V. To our knowledge, this PCE is one of the highest values for fullerene-based single BHJ devices with WBG polymers having a band gap of over 1.90 eV. A tandem solar cell was also demonstrated successfully to show a PCE of 10.3% by combining a diketopyrrolopyrrole-based low band gap polymer
Derivation of Chondrogenically-Committed Cells from Human Embryonic Cells for Cartilage Tissue Regeneration
Background: Heterogeneous and uncontrolled differentiation of human embryonic stem cells (hESCs) in embryoid bodies (EBs) limits the potential use of hESCs for cell-based therapies. More efficient strategies are needed for the commitment and differentiation of hESCs to produce a homogeneous population of specific cell types for tissue regeneration applications. Methodology/Principal Findings: We report here that significant chondrocytic commitment of feeder-free cultured human embryonic stem cells (FF-hESCs), as determined by gene expression and immunostaining analysis, was induced by coculture with primary chondrocytes. Furthermore, a dynamic expression profile of chondrocyte-specific genes was observed during monolayer expansion of the chondrogenically-committed cells. Chondrogenically-committed cells synergistically responded to transforming growth factor-b1 (TGF-b1) and b1-integrin activating antibody by increasing tissue mass in pellet culture. In addition, when encapsulated in hydrogels, these cells formed cartilage tissue both in vitro and in vivo. In contrast, the absence of chondrocyte co-culture did not result in an expandable cell population from FF-hESCs. Conclusions/Significance: The direct chondrocytic commitment of FF-hESCs can be induced by morphogenetic factor
- β¦