Expanding the scope of N → S acyl transfer in native peptide sequences

Understanding the factors that influence N → S acyl transfer in native peptide sequences, and discovery of new reagents that facilitate it, will be key to expanding its scope and applicability. Here, through a study of short model peptides in thioester formation and cyclisation reactions, we demonstrate that a wider variety of Xaa-Cys motifs than originally envisaged are capable of undergoing efficient N → S acyl transfer. We present data for the relative rates of thioester formation and cyclisation for a representative set of amino acids, and show how this expanded scope can be applied to the production of the natural protease inhibitor Sunflower Trypsin Inhibitor-1 (SFTI-1)

Prevalence of prenatal zinc deficiency and its association with socio-demographic, dietary and health care related factors in Rural Sidama, Southern Ethiopia: A cross-sectional study

<p>Abstract</p> <p>Background</p> <p>Several studies witnessed that prenatal zinc deficiency (ZD) predisposes to diverse pregnancy complications. However, scientific evidences on the determinants of prenatal ZD are scanty and inconclusive. The purpose of the present study was to assess the prevalence and determinants of prenatal ZD in Sidama zone, Southern Ethiopia.</p> <p>Methods</p> <p>A community based, cross-sectional study was conducted in Sidama zone in January and February 2011. Randomly selected 700 pregnant women were included in the study. Data on potential determinants of ZD were gathered using a structured questionnaire. Serum zinc concentration was measured using Atomic Absorption Spectrometry. Statistical analysis was done using logistic regression and linear regression.</p> <p>Results</p> <p>The mean serum zinc concentration was 52.4 (+/-9.9) μg/dl (95% CI: 51.6-53.1 μg/dl). About 53.0% (95% CI: 49.3-56.7%) of the subjects were zinc deficient. The majority of the explained variability of serum zinc was due to dietary factors like household food insecurity level, dietary diversity and consumption of animal source foods. The risk of ZD was 1.65 (95% CI: 1.02-2.67) times higher among women from maize staple diet category compared to <it>Enset </it>staple diet category. Compared to pregnant women aged 15-24 years, those aged 25-34 and 35-49 years had 1.57 (95% CI: 1.04-2.34) and 2.18 (95% CI: 1.25-3.63) times higher risk of ZD, respectively. Women devoid of self income had 1.74 (95% CI: 1.11-2.74) time increased risk than their counterparts. Maternal education was positively associated to zinc status. Grand multiparas were 1.74 (95% CI: 1.09-3.23) times more likely to be zinc deficient than nulliparas. Frequency of coffee intake was negatively association to serum zinc level. Positive association was noted between serum zinc and hemoglobin concentrations. Altitude, history of iron supplementation, maternal workload, physical access to health service, antenatal care and nutrition education were not associated to zinc status.</p> <p>Conclusion</p> <p>ZD is of public health concern in the area. The problem must be combated through a combination of short, medium and long-term strategies. This includes the use of household based phytate reduction food processing techniques, agricultural based approaches and livelihood promotion strategies.</p

A Review of Studies Evaluating Insecticide Barrier Treatments for Mosquito Control From 1944 to 2018

Background and Purpose: Barrier insecticide treatments have a long history in mosquito control programs but have been used more frequently in the United States in recent years for control of invasive “backyard� species (eg, Aedes albopictus) and increases in incidence of vector-borne diseases (eg, Zika). Methods: We reviewed the published literature for studies investigating barrier treatments for mosquito control during the last 74 years (1944-2018). We searched databases such as PubMed, Web of Science, and Google Scholar to retrieve worldwide literature on barrier treatments. Results: Forty-four studies that evaluated 20 active ingredients (AIs) and 21 formulated products against multiple mosquito species are included. Insecticides investigated for efficacy included organochlorines (dichlorodiphenyltrichloroethane [DDT], β-hexachlorocyclohexane [BHC]), organophosphates (malathion), and pyrethroids (bifenthrin, deltamethrin, permethrin, lambda-cyhalothrin) as AIs. Study design varied with multiple methods used to evaluate effectiveness of barrier treatments. Barrier treatments were effective at lowering mosquito populations although there was variation between studies and for different mosquito species. Factors other than AI, such as exposure to rainfall and application equipment used, also influenced control efficacy. Conclusions: Many of the basic questions on the effectiveness of barrier insecticide applications have been answered, but several important details still must be investigated to improve precision and impact on vector-borne pathogen transmission. Recommendations are made to assist future evaluations of barrier treatments for mosquito control and to limit the potential development of insecticide resistance

Aerobic capacity, activity levels and daily energy expenditure in male and female adolescents of the kenyan nandi sub-group

The relative importance of genetic and socio-cultural influences contributing to the success of east Africans in endurance athletics remains unknown in part because the pre-training phenotype of this population remains incompletely assessed. Here cardiopulmonary fitness, physical activity levels, distance travelled to school and daily energy expenditure in 15 habitually active male (13.9±1.6 years) and 15 habitually active female (13.9±1.2) adolescents from a rural Nandi primary school are assessed. Aerobic capacity ([Formula: see text]) was evaluated during two maximal discontinuous incremental exercise tests; physical activity using accelerometry combined with a global positioning system; and energy expenditure using the doubly labelled water method. The [Formula: see text] of the male and female adolescents were 73.9±5.7 ml(.) kg(-1.) min(-1) and 61.5±6.3 ml(.) kg(-1.) min(-1), respectively. Total time spent in sedentary, light, moderate and vigorous physical activities per day was 406±63 min (50% of total monitored time), 244±56 min (30%), 75±18 min (9%) and 82±30 min (10%). Average total daily distance travelled to and from school was 7.5±3.0 km (0.8-13.4 km). Mean daily energy expenditure, activity-induced energy expenditure and physical activity level was 12.2±3.4 MJ(.) day(-1), 5.4±3.0 MJ(.) day(-1) and 2.2±0.6. 70.6% of the variation in [Formula: see text] was explained by sex (partial R(2) = 54.7%) and body mass index (partial R(2) = 15.9%). Energy expenditure and physical activity variables did not predict variation in [Formula: see text] once sex had been accounted for. The highly active and energy-demanding lifestyle of rural Kenyan adolescents may account for their exceptional aerobic fitness and collectively prime them for later training and athletic success

Chemical characterization of some substituted hydroxyapatites

Synthetic multi-substituted hydroxyapatite nano powders containing silicon and or carbonate prepared by a wet chemical method. The process parameters are set up to allow the simultaneous substitution of carbonate and silicon ions in the place of phosphorus. The chemical and structural characterizations of the prepared powders are determined with the aid of; XRF, ICP, XRD and FTIR. The results show that, the ion substitution in the crystal lattice of HA caused a change in the unit cell dimensions and affected the degree of crystallization of the produced powders. The apatite formation abilityy of the prepared discs from the synthesized powders is determined by immersing in SBF solution for different periods. The degree of ion release was determined in the obtained solutions. The examined surface of the immersed discs under SEM and analyzed by CDS showed a more dense HA layer than those of un-substituted ones. The HA with the substituted silicon and carbonate ions, showed the highest solubility with greater rate of ion release, compared with carbonate-free powder. All prepared powders took sodium ion from the SBF solution during immersion, which was not recorded before

Costs and quality of life for prehabilitation and early rehabilitation after surgery of the lumbar spine

During the recent years improved operation techniques and administrative procedures have been developed for early rehabilitation. At the same time preoperative lifestyle intervention (prehabilitation) has revealed a large potential for additional risk reduction

Fluid gels: a new feedstock for high viscosity jetting

Suspensions of gel particles which are pourable or spoonable at room temperature can be created by shearing a gelling biopolymer through its gelation (thermal or ion mediated) rather than allowing quiescent cooling – thus the term ‘fluid gel’ may be used to describe the resulting material. As agar gelation is thermoreversible this type of fluid gel is able to be heated again to melt agar gel particles to varying degrees then re-form a network quiescently upon cooling, whose strength depends on the temperature of re-heating, determining the amount of agar solubilised and subsequently able to partake in re-gelation. Using this principle, for the first time fluid gels have been applied to a high viscosity 3D printing process wherein the printing temperature (at the nozzle) is controllable. This allows the use of ambient temperature feedstocks and by altering the nozzle temperature, the internal nature (presence or absence of gel particles) and gel strength of printed droplets differs. If the nozzle prints at different temperatures for each layer a structure with modulated texture could be created

Genetic Determinants of Circulating Sphingolipid Concentrations in European Populations

Sphingolipids have essential roles as structural components of cell membranes and in cell signalling, and disruption of their metabolism causes several diseases, with diverse neurological, psychiatric, and metabolic consequences. Increasingly, variants within a few of the genes that encode enzymes involved in sphingolipid metabolism are being associated with complex disease phenotypes. Direct experimental evidence supports a role of specific sphingolipid species in several common complex chronic disease processes including atherosclerotic plaque formation, myocardial infarction (MI), cardiomyopathy, pancreatic beta-cell failure, insulin resistance, and type 2 diabetes mellitus. Therefore, sphingolipids represent novel and important intermediate phenotypes for genetic analysis, yet little is known about the major genetic variants that influence their circulating levels in the general population. We performed a genome-wide association study (GWAS) between 318,237 single-nucleotide polymorphisms (SNPs) and levels of circulating sphingomyelin (SM), dihydrosphingomyelin (Dih-SM), ceramide (Cer), and glucosylceramide (GluCer) single lipid species (33 traits); and 43 matched metabolite ratios measured in 4,400 subjects from five diverse European populations. Associated variants (32) in five genomic regions were identified with genome-wide significant corrected p-values ranging down to 9.08 x 10(-66). The strongest associations were observed in or near 7 genes functionally involved in ceramide biosynthesis and trafficking: SPTLC3, LASS4, SGPP1, ATP10D, and FADS1-3. Variants in 3 loci (ATP10D, FADS3, and SPTLC3) associate with MI in a series of three German MI studies. An additional 70 variants across 23 candidate genes involved in sphingolipid-metabolizing pathways also demonstrate association (p = 10(-4) or less). Circulating concentrations of several key components in sphingolipid metabolism are thus under strong genetic control, and variants in these loci can be tested for a role in the development of common cardiovascular, metabolic, neurological, and psychiatric diseases

Compressive properties of commercially available polyurethane foams as mechanical models for osteoporotic human cancellous bone

<p>Abstract</p> <p>Background</p> <p>Polyurethane (PU) foam is widely used as a model for cancellous bone. The higher density foams are used as standard biomechanical test materials, but none of the low density PU foams are universally accepted as models for osteoporotic (OP) bone. The aim of this study was to determine whether low density PU foam might be suitable for mimicking human OP cancellous bone.</p> <p>Methods</p> <p>Quasi-static compression tests were performed on PU foam cylinders of different lengths (3.9 and 7.7 mm) and of different densities (0.09, 0.16 and 0.32 g.cm^-3), to determine the Young's modulus, yield strength and energy absorbed to yield.</p> <p>Results</p> <p>Young's modulus values were 0.08–0.93 MPa for the 0.09 g.cm^-3foam and from 15.1–151.4 MPa for the 0.16 and 0.32 g.cm^-3foam. Yield strength values were 0.01–0.07 MPa for the 0.09 g.cm^-3foam and from 0.9–4.5 MPa for the 0.16 and 0.32 g.cm^-3foam. The energy absorbed to yield was found to be negligible for all foam cylinders.</p> <p>Conclusion</p> <p>Based on these results, it is concluded that 0.16 g.cm^-3PU foam may prove to be suitable as an OP cancellous bone model when fracture stress, but not energy dissipation, is of concern.</p

Angiographic correlations of patients with small vessel disease diagnosed by adenosine-stress cardiac magnetic resonance imaging

Cardiac magnetic resonance imaging (CMR) with adenosine-stress myocardial perfusion is gaining importance for the detection and quantification of coronary artery disease (CAD). However, there is little knowledge about patients with CMR-detected ischemia, but having no relevant stenosis as seen on coronary angiography (CA). The aims of our study were to characterize these patients by CMR and CA and evaluate correlations and potential reasons for the ischemic findings. 73 patients with an indication for CA were first scanned on a 1.5T whole-body CMR-scanner including adenosine-stress first-pass perfusion. The images were analyzed by two independent investigators for myocardial perfusion which was classified as subendocardial ischemia (n = 22), no perfusion deficit (n = 27, control 1), or more than subendocardial ischemia (n = 24, control 2). All patients underwent CA, and a highly significant correlation between the classification of CMR perfusion deficit and the degree of coronary luminal narrowing was found. For quantification of coronary blood flow, corrected Thrombolysis in Myocardial Infarction (TIMI) frame count (TFC) was evaluated for the left anterior descending (LAD), circumflex (LCX) and right coronary artery (RCA). The main result was that corrected TFC in all coronaries was significantly increased in study patients compared to both control 1 and to control 2 patients. Study patients had hypertension or diabetes more often than control 1 patients. In conclusion, patients with CMR detected subendocardial ischemia have prolonged coronary blood flow. In connection with normal resting flow values in CAD, this supports the hypothesis of underlying coronary microvascular impairment. CMR stress perfusion differentiates non-invasively between this entity and relevant CAD