Reconciling bathymetric and stratigraphic expressions of submarine channel geometry

Modern submarine channels form distinctive morphological features on the seafloor and play a critical role in shaping the marine sedimentary record. Recent studies have captured the extremely diverse range of cross-sectional geometries in submarine channels from bathymetric data, which typically display aspect ratios markedly different to the stratigraphic record of ancient submarine channels. Here, we compare and reconcile the relationship between the geomorphic expression of submarine channels as observed on the seafloor and the geometry of their stratigraphic bodies as mapped in seismic-reflection data, using the Niger Delta slope an exemplar. For the same channels, our data allows us to contrast the distribution of widths, depths, and aspect ratios from bathymetric data and at two hierarchical scales in the underlying stratigraphy – the channel element and channel system scale. Channel characteristics are also contextualised with respect to two key variables, the underlying structural template and the relative timescale for which the studied systems have been active. Analysis of the seafloor bankfull geometries highlights substantial variability with widths ranging from ∼300 m to ∼4 km and aspect ratios from ∼10:1–100:1. In contrast, the geometry of stratigraphic channel element bodies remains remarkably consistent across the three channels with widths ∼480–620 m and aspect ratios of ∼9:1. At channel system scale stratigraphic width is comparable to that seen in the bathymetric data, but with aspect ratios of 6–23:1. Our results therefore highlight a marked disparity in the cross-sectional geometries on the present-day seafloor and for their associated channels in the stratigraphic record. We demonstrate that a large part of the disparity between modern and ancient submarine channel geometries may be explained by post-abandonment modification of the seabed channels where there is reduced Holocene activity and we argue this effect likely plays a role in the differences seen in global data sets. These results have significant implications for the use of bankfull process analogues when applied to bathymetric data to estimate submarine channel flow characteristics

New models for submarine channel deposits on structurally complex slopes: Examples from the Niger delta system

Submarine channel complexes are often described as having a two-phase stratigraphic evolution where an initial phase of migration is followed by aggradation, generating a ‘hockey-stick shaped’ channel trajectory. However, the role of tectonic forcing in modifying time-integrated sedimentary architectures remains poorly understood. Here, we evaluate how tectonically driven changes in slope modify the evolution—both in terms of morphology and stratigraphic architecture—of submarine channels across a range of spatial scales from the fundamental architectural unit, a channel element, to the scale of a channel complex set, using examples from the Niger Delta system. From a 3D, time-migrated seismic reflection volume, we use amplitude extractions, frequency decomposition and RGB blending to determine channel stratigraphic architectures. These observations are used systematically to evaluate the development of cross-sectional and planform architectures as the channel systems interact with a range of active and pre-existing structural bathymetry. Our results indicate that while a channel complex's stratigraphic architecture may be captured by a two-phase evolution on unstructured slopes, this model fails on structurally complex slopes. Unstructured slope channel complexes display a repeated arrangement of migration dominating the early stratigraphic record and subsequent aggradation. The late aggradational phase signals a decrease in the rate of growth in channel complex width and the rate of change in sinuosity relative to aggradation throughout the complex's development. However, tectonically driven changes in sinuosity and the relative rates of channel migration and aggradation modify complex development significantly. We identify three end-member styles of channel-structure interaction, determined by the timing of bathymetry development and its associated style: (1) pre-channel structural bathymetry; (2) coeval positive relief, and (3) coeval negative relief. Where structural relief pre-dates channel inception, a principal adjustment is in the initial channel course with early channel elements being forced around positive relief of the structure, generating long-wavelength bends in the complex's course. Where structure continues to modify slope creating positive and negative bathymetry during complex development, migration and bend development continue with complex width and channel element sinuosity increasing until abandonment. These observations demonstrate that submarine channel architecture and planform are highly sensitive to tectonic perturbation and we use these results to generate graphical models that show predicted architectural evolution of submarine channels on structurally complex slopes in general

Quantifying structural controls on submarine channel architecture and kinematics

Over the past two decades, the increased availability of three-dimensional (3-D) seismic data and their integration with outcrop and numerical modeling studies have enabled the architectural evolution of submarine channels to be studied in detail. While tectonic activity is a recognized control on submarine channel morphology, the temporal and spatial complexity associated with these systems means submarine channel behavior over extended time periods, and the ways in which processes scale and translate into time-integrated sedimentary architecture, remain poorly understood. For example, tectonically driven changes in slope morphology may locally enhance or diminish a channel's ability to incise, aggrade, and migrate laterally, changing channel kinematics and the distribution of composite architectures. Here, we combined seismic techniques with the concept of stratigraphic mobility to quantify how gravity-driven deformation influenced the stratigraphic architecture of two submarine channels, from the fundamental architectural unit, a channel element, to channel complex scale, on the Niger Delta slope. From a 3-D, time-migrated, seismic-reflection volume, we evaluated the evolution of widths, depths, sinuosities, curvatures, and stratigraphic mobilities at fixed intervals downslope as the channel complexes interacted with a range of gravity-driven structures. At channel element scale, sinuosity and bend amplitude were consistently elevated over structured reaches of the slope, displaying a nonlinear increase in length, perpendicular to flow direction. At channel complex scale, the same locations, updip of structure, correlated to an increase in channel complex width and aspect ratio. Normalized complex dimensions and complex-averaged stratigraphic mobilities showed lateral migration to be the dominant form of stratigraphic preservation in these locations. Our results explain the intricate relationship between the planform characteristics of channel elements and the cross-sectional dimensions of the channel complex. We show how channel element processes and kinematics translate to form higher-order stratigraphic bodies, and we demonstrate how tectonically driven changes in slope develop channel complexes with distinct cross-sectional and planform architectures

New statistical quantification of the impact of active deformation on the distribution of submarine channels

Submarine channel systems play a crucial role in governing the delivery of sediments and pollutants such as plastics from the shelf edge to deep water. Understanding their distribution in space and time is important for constraining the locus, magnitude, and characteristics of deep-water sedimentation and for predicting stratigraphic architectures and depositional facies. Using three-dimensional seismic reflection data covering the outer fold-and-thrust belt of the Niger Delta, we determined the pathways of Miocene to Pliocene channels that crossed, at 173 locations, 11 fold-thrust structures for which the temporal and spatial evolution of strain rates has been constrained over a period of 11 m.y. We use a statistical approach to quantify strain and shortening rate distributions recorded where channels have crossed structures compared to the fault array as a whole. Our results prove unambiguously that these distributions are different. The median strain rate where channels cross faults is 1%/m.y. Our results quantify the sensitivity of submarine channels to active deformation at a population level for the first time and enable us to predict the temporal and spatial routing of submarine channels affected by structurally driven topography

The Development and Use of an Innovative Laboratory Method for Measuring Arsenic in Drinking Water from Western Bangladesh

All of Bangladesh’s approximately 10 million drinking-water tube wells must be periodically tested for arsenic. The magnitude of this task and the limited resources of Bangladesh have led to the use of low-cost, semiquantitative field kits that measure As to a relatively high 50 μg/L national drinking water standard. However, there is an urgent need to supplement and ultimately replace these field kits with an inexpensive laboratory method that can measure As to the more protective 10 μg/L World Health Organization (WHO) health-based drinking water guideline. Unfortunately, Bangladesh has limited access to atomic absorption spectrometers or other expensive instruments that can measure As to the WHO guideline of 10 μg/L. In response to this need, an inexpensive and highly sensitive laboratory method for measuring As has been developed. This new method is the only accurate, precise, and safe way to quantify As < 10 μg/L without expensive or highly specialized laboratory equipment. In this method, As is removed from the sample by reduction to arsine gas, collected in an absorber by oxidation to arsenic acid, colorized by a sequential reaction to arsenomolybdate, and quantified by spectrophotometry. We compared this method with the silver diethyldithiocarbamate [AgSCSN(CH(2)CH(3))(2)] and graphite furnace atomic absorption spectroscopy (GFAAS) methods for measuring As. Our method is more accurate, precise, and environmentally safe than the AgSCSN(CH(2)CH(3))(2) method, and it is more accurate and affordable than GFAAS. Finally, this study suggests that Bangladeshis will readily share drinking water with their neighbors to meet the more protective WHO guideline for As of 10 μg/L

Can a falling tree make a noise in two forests at the same time?

It is a commonplace to claim that quantum mechanics supports the old idea that a tree falling in a forest makes no sound unless there is a listener present. In fact, this conclusion is far from obvious. Furthermore, if a tunnelling particle is observed in the barrier region, it collapses to a state in which it is no longer tunnelling. Does this imply that while tunnelling, the particle can not have any physical effects? I argue that this is not the case, and moreover, speculate that it may be possible for a particle to have effects on two spacelike separate apparatuses simultaneously. I discuss the measurable consequences of such a feat, and speculate about possible statistical tests which could distinguish this view of quantum mechanics from a ``corpuscular'' one. Brief remarks are made about an experiment underway at Toronto to investigate these issues.Comment: 9 pp, Latex, 3 figs, to appear in Proc. Obsc. Unr. Conf.; Fig 2 postscript repaired on 26.10.9

Potential of a cyclone prototype spacer to improve in vitro dry powder delivery

Copyright The Author(s) 2013. This article is published with open access at Springerlink.com. This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are creditedPurpose: Low inspiratory force in patients with lung disease is associated with poor deagglomeration and high throat deposition when using dry powder inhalers (DPIs). The potential of two reverse flow cyclone prototypes as spacers for commercial carrierbased DPIs was investigated. Methods: Cyclohaler®, Accuhaler® and Easyhaler® were tested with and without the spacers between 30-60 Lmin-1. Deposition of particles in the next generation impactor and within the devices was determined by high performance liquid chromatography. Results: Reduced induction port deposition of the emitted particles from the cyclones was observed due to the high retention of the drug within the spacers (e.g. salbutamol sulphate (SS): 67.89 ± 6.51 % at 30 Lmin-1 in Cheng 1). Fine particle fractions of aerosol as emitted from the cyclones were substantially higher than the DPIs alone. Moreover, the aerodynamic diameters of particles emitted from the cyclones were halved compared to the DPIs alone (e.g. SS from the Cyclohaler® at 4 kPa: 1.08 ± 0.05 μm vs. 3.00 ± 0.12 μm, with and without Cheng 2, respectively) and unaltered with increased flow rates. Conclusion: This work has shown the potential of employing a cyclone spacer for commercial carrier-based DPIs to improve inhaled drug delivery.Peer reviewe

Serotonin transporter binding of [123I]ADAM in bulimic women, their healthy twin sisters, and healthy women: a SPET study

<p>Abstract</p> <p>Background</p> <p>Bulimia Nervosa (BN) is believed to be caused by an interaction of genetic and environmental factors. Previous studies support the existence of a bulimia-related endophenotype as well as disturbances in serotonin (5-HT) transmission. We studied serotonin transporter (SERT) binding in BN, and to investigate the possibility of a SERT-related endophenotype for BN, did this in a sample of female twins. We hypothesized clearly reduced SERT binding in BN women as opposed to healthy women, and intermediate SERT binding in unaffected co-twins.</p> <p>Methods</p> <p>We studied 13 female twins with BN (9 with purging and 4 with non-purging BN) and 25 healthy women, including 6 healthy twin sisters of BN patients and 19 women from 10 healthy twin pairs. [¹²³I]ADAM, a selective SERT radioligand for single photon emission tomography (SPET) imaging, was used to assess SERT availability in the midbrain and the thalamus.</p> <p>Results</p> <p>No differences in SERT binding were evident when comparing the BN women, their unaffected co-twins and the healthy controls (p = 0.14). The healthy sisters of the BN patients and the healthy control women had similar SERT binding in both brain regions. In a <it>post hoc </it>subgroup analysis, the purging bulimics had higher SERT binding than the healthy women in the midbrain (p = 0.03), but not in the thalamus.</p> <p>Conclusion</p> <p>Our finding of increased SERT binding in the midbrain in the purging BN women raises the possibility that this subgroup of bulimics might differ in serotonergic function from the non-purging ones. The similarity of the unaffected co-twins and the healthy controls doesn't support our initial assumption of a SERT-related endophenotype for BN. Due to the small sample size, our results need to be interpreted with caution and verified in a larger sample.</p

Coordinated optimization of visual cortical maps (II) Numerical studies

It is an attractive hypothesis that the spatial structure of visual cortical architecture can be explained by the coordinated optimization of multiple visual cortical maps representing orientation preference (OP), ocular dominance (OD), spatial frequency, or direction preference. In part (I) of this study we defined a class of analytically tractable coordinated optimization models and solved representative examples in which a spatially complex organization of the orientation preference map is induced by inter-map interactions. We found that attractor solutions near symmetry breaking threshold predict a highly ordered map layout and require a substantial OD bias for OP pinwheel stabilization. Here we examine in numerical simulations whether such models exhibit biologically more realistic spatially irregular solutions at a finite distance from threshold and when transients towards attractor states are considered. We also examine whether model behavior qualitatively changes when the spatial periodicities of the two maps are detuned and when considering more than 2 feature dimensions. Our numerical results support the view that neither minimal energy states nor intermediate transient states of our coordinated optimization models successfully explain the spatially irregular architecture of the visual cortex. We discuss several alternative scenarios and additional factors that may improve the agreement between model solutions and biological observations.Comment: 55 pages, 11 figures. arXiv admin note: substantial text overlap with arXiv:1102.335

Inference of hidden structures in complex physical systems by multi-scale clustering

We survey the application of a relatively new branch of statistical physics--"community detection"-- to data mining. In particular, we focus on the diagnosis of materials and automated image segmentation. Community detection describes the quest of partitioning a complex system involving many elements into optimally decoupled subsets or communities of such elements. We review a multiresolution variant which is used to ascertain structures at different spatial and temporal scales. Significant patterns are obtained by examining the correlations between different independent solvers. Similar to other combinatorial optimization problems in the NP complexity class, community detection exhibits several phases. Typically, illuminating orders are revealed by choosing parameters that lead to extremal information theory correlations.Comment: 25 pages, 16 Figures; a review of earlier work