Large amplitude drop shape oscillations

An experimental study of large amplitude drop shape oscillation was conducted in immiscible liquids systems and with levitated free liquid drops in air. In liquid-liquid systems the results indicate the existence of familiar characteristics of nonlinear phenomena. The resonance frequency of the fundamental quadrupole mode of stationary, low viscosity Silicone oil drops acoustically levitated in water falls to noticeably low values as the amplitude of oscillation is increased. A typical, experimentally determined relative frequency decrease of a 0.5 cubic centimeters drop would be about 10% when the maximum deformed shape is characterized by a major to minor axial ratio of 1.9. On the other hand, no change in the fundamental mode frequency could be detected for 1 mm drops levitated in air. The experimental data for the decay constant of the quadrupole mode of drops immersed in a liquid host indicate a slight increase for larger oscillation amplitudes. A qualitative investigation of the internal fluid flows for such drops revealed the existence of steady internal circulation within drops oscillating in the fundamental and higher modes. The flow field configuration in the outer host liquid is also significantly altered when the drop oscillation amplitude becomes large

System for monitoring physical characteristics of fluids

An apparatus and method are described for measuring physical characteristics of fluid, by placing a drop of the fluid in a batch of a second fluid and passing acoustic waves through the bath. The applied frequency of the acoustic waves is varied, to determine the precise value of a frequency at which the drop undergoes resonant oscillations. The resonant frequency indicates the interfacial tension of the drop in the bath, and the interfacial tension can indicate physical properties of the fluid in the drop

Acoustic bubble removal method

A method is described for removing bubbles from a liquid bath such as a bath of molten glass to be used for optical elements. Larger bubbles are first removed by applying acoustic energy resonant to a bath dimension to drive the larger bubbles toward a pressure well where the bubbles can coalesce and then be more easily removed. Thereafter, submillimeter bubbles are removed by applying acoustic energy of frequencies resonant to the small bubbles to oscillate them and thereby stir liquid immediately about the bubbles to facilitate their breakup and absorption into the liquid

The electronic structures and magnetic properties of perovskite ruthenates from constrained orbital hybridization calculations

We introduce a method to analyze the effect of hybridization by shifting corresponding atomic levels using external potentials. Based on this approach, we study perovskite ruthenates,\ and unambiguously identify that the covalency between the \textit{A}-site cation and O ion will modify the Ru-O hybridization and change the density of state at Fermi level, consequently affect the magnetic properties significantly. We also study the effect of pressure and reveal that hydrostatic pressure has a small effect on the Ru-O-Ru bond angle of SrRuO$_{3}$, while it will decrease the Ru-O length and increase the band width significantly. Therefore, the magnetic ordering temperature will decrease monotonically with pressure

Polarization and time-resolved photoluminescence spectroscopy of excitons in MoSe2 monolayers

We investigate valley exciton dynamics in MoSe2 monolayers in polarization- and time-resolved photoluminescence (PL) spectroscopy at 4K. Following circularly polarized laser excitation, we record a low circular polarization degree of the PL of typically $\leq5\%$. This is about 10 times lower than the polarization induced under comparable conditions in MoS2 and WSe2 monolayers. The evolution of the exciton polarization as a function of excitation laser energy and power is monitored in PL excitation (PLE) experiments. Fast PL emission times are recorded for both the neutral exciton of $\leq3$ ps and for the charged exciton (trion) of 12 ps.Comment: 4 pages, 3 figure

Local Density Approximation Description of Electronic Properties of Wurtzite Cadmium Sulfide (w-CdS)

We present calculated, electronic and related properties of wurtzite cadmium sulfide (w-CdS). Our ab-initio, non-relativistic calculations employed a local density functional approximation (LDA) potential and the linear combination of atomic orbitals (LCAO). Following the Bagayoko, Zhao, and Williams (BZW) method, we solved self-consistently both the Kohn-Sham equation and the equation giving the ground state density in terms of the wave functions of the occupied states. Our calculated, direct band gap of 2.47 eV, at the point, is in excellent agreement with experiment. So are the calculated density of states and the electron effective mass. In particular, our results reproduce the peaks in the conduction band density of states, within the experimental uncertainties.Comment: 22 Pages 4 Figure

Coalescence and Anti-Coalescence Interference of Two-Photon Wavepacket in a Beam Splitter

We study a general theory on the interference of two-photon wavepacket in a beam splitter (BS). We find that the perfect coalescence interference requires a symmetric spectrum of two-photon wavepacket which can be entangled or un-entangled. Furthermore, we introduce a two-photon wavepacket with anti-symmetric spectrum, which is related with photon entanglement and shows a perfect anti-coalescence effect. The theory present uniform and complete explanation to two-photon interference.Comment: 5 pages, 2 figure

The dust emission of high-redshift quasars

The detection of powerful near-infrared emission in high redshift (z>5) quasars demonstrates that very hot dust is present close to the active nucleus also in the very early universe. A number of high-redshift objects even show significant excess emission in the rest frame NIR over more local AGN spectral energy distribution (SED) templates. In order to test if this is a result of the very high luminosities and redshifts, we construct mean SEDs from the latest SDSS quasar catalogue in combination with MIR data from the WISE preliminary data release for several redshift and luminosity bins. Comparing these mean SEDs with a large sample of z>5 quasars we could not identify any significant trends of the NIR spectral slope with luminosity or redshift in the regime 2.5 < z < 6 and 10^45 < nuL_nu(1350AA) < 10^47 erg/s. In addition to the NIR regime, our combined Herschel and Spitzer photometry provides full infrared SED coverage of the same sample of z>5 quasars. These observations reveal strong FIR emission (L_FIR > 10^13 L_sun) in seven objects, possibly indicating star-formation rates of several thousand solar masses per year. The FIR excess emission has unusally high temperatures (T ~ 65 K) which is in contrast to the temperature typically expected from studies at lower redshift (T ~ 45 K). These objects are currently being investigated in more detail.Comment: 6 pages, 3 figures, to appear in the proceedings to "The Central Kiloparsec in Galactic Nuclei (AHAR2011)", Journal of Physics: Conference Series (JPCS), IOP Publishin

Non-Volatile Magnonic Logic Circuits Engineering

We propose a concept of magnetic logic circuits engineering, which takes an advantage of magnetization as a computational state variable and exploits spin waves for information transmission. The circuits consist of magneto-electric cells connected via spin wave buses. We present the result of numerical modeling showing the magneto-electric cell switching as a function of the amplitude as well as the phase of the spin wave. The phase-dependent switching makes it possible to engineer logic gates by exploiting spin wave buses as passive logic elements providing a certain phase-shift to the propagating spin waves. We present a library of logic gates consisting of magneto-electric cells and spin wave buses providing 0 or p phase shifts. The utilization of phases in addition to amplitudes is a powerful tool which let us construct logic circuits with a fewer number of elements than required for CMOS technology. As an example, we present the design of the magnonic Full Adder Circuit comprising only 5 magneto-electric cells. The proposed concept may provide a route to more functional wave-based logic circuitry with capabilities far beyond the limits of the traditional transistor-based approach

Likelihood Analysis of Repeating in the BATSE Catalogue

I describe a new likelihood technique, based on counts-in-cells statistics, that I use to analyze repeating in the BATSE 1B and 2B catalogues. Using the 1B data, I find that repeating is preferred over non-repeating by 4.3:1 odds, with a well-defined peak at 5-6 repetitions per source. I find that the post-1B data are consistent with the repeating model inferred from the 1B data, after taking into account the lower fraction of bursts with well-determined positions. Combining the two data sets, I find that the odds favoring repeating over non-repeating are almost unaffected at 4:1, with a narrower peak at 5 repetitions per source. I conclude that the data sets are consistent both with each other and with repeating, and that for these data sets the odds favor repeating.Comment: 5 pages including 3 encapsulated figures, as a uuencoded, gzipped, Postscript file. To appear in Proc. of the 1995 La Jolla workshop ``High Velocity Neutron Stars and Gamma-Ray Bursts'' eds. Rothschild, R. et al., AIP, New Yor