59,080 research outputs found
Recommended from our members
The pupillary response of cephalopods
This paper provides the first detailed description of the time courses of light-evoked pupillary constriction for two species of cephalopods, Sepia officinalis (a cuttlefish) and Eledone cirrhosa (an octopus). The responses are much faster than hitherto reported, full contraction in Sepia taking less than 1 s, indicating it is among the most rapid pupillary responses in the animal kingdom. We also describe the dependence of the degree of pupil constriction on the level of ambient illumination and show considerable variability between animals. Furthermore, both Sepia and Eledone lack a consensual light-evoked pupil response. Pupil dilation following darkness in Sepia is shown to be very variable, often occurring within a second but at other times taking considerably longer. This may be the result of extensive light-independent variations in pupil diameter in low levels of illumination
Collapsible loop antenna for space vehicle Patent
Collapsible, space erectable loop antenna system for space vehicl
Durable solid lubricant coatings for foil gas bearings to 315 deg C
The durability and friction characteristics of bonded solid lubricant films on compliant gas bearings were measured. Coating compositions, which were judged to be suitable for use to at least 315 C, were selected for this study. Most of the data were obtained with polyimide-bonded graphite fluoride coatings and with silicate-bonded graphite coatings. These coatings were applied to the bore of Inconel 750 foil bearings. The journals were A286 stainless steel, with a rms surface finish of 0.2 microns. The foils were subjected to repeated start/stop cycles under a 14 kPa (2 psi) bearing unit load. Sliding contact occurred during lift-off and coast down at surface velocities less than 6 m/s (3000 rpm). Testing continued until 9000 cycles were accumulated or until a rise in starting torque indicated that the coating had failed. The coatings were evaluated in the temperature range from 25 C to 315 C. Comparisons in coating performance as well as discussions of their properties and methods of application are given
Effects of silver and group 2 fluorides addition to plasma sprayed chromium carbide high temperature solid lubricant for foil gas bearing to 650 deg C
A new self-lubricating coating composition of nickel aluminide-bonded chromium carbide formulated with silver and Group II fluorides was developed in a research program on high temperature solid lubricants. One of the proposed applications for this new coating composition is as a wide temperature spectrum solid lubricant for complaint foil gas bearings. Friction and wear properties were obtained using a foil gas bearing start/stop apparatus at temperatures from 25 to 650 C. The journals were Inconel 718. Some were coated with the plasma sprayed experimental coating, others with unmodified nickel aluminide/chromium carbide as a baseline for comparison. The addtitional components were provided to assist in achieving low friction over the temperature range of interest. Uncoated, preoxidized Inconel X-750 foil bearings were operated against these surfaces. The foils were subjected to repeated start/stop cycles under a 14-kPa (2-psi) bearing unit loading. Sliding contact occurred during lift-off and coastdown at surface velocities less than 6 m/s (3000 rpm). Testing continued until 9000 start/stop cycles were accumulated or until a rise in starting torque indicated the journal/bearing had failed. Comparison in coating performance as well as discussions of their properties and methods of application are given
Axial compressor middle stage secondary flow study
This report describes an experimental investigation of the secondary flow within and aft of an axial compressor model with thick endwall boundary layers. The objective of the study was to obtain detailed aerodynamic and trace gas concentration traverse data aft of a well documented isolated rotor for the ultimate purpose of improving the design phases of compressor development based on an improved physical understanding of secondary flow. It was determined from the flow visualization, aerodynamic, and trace gas concentration results that the relative unloading of the midspan region of the airfoil inhibitied a fullspan separation at high loading preventing the massive radial displacement of the hub corner stall to the tip. Radial distribution of high and low total pressure fluid influenced the magnitude of the spanwise distribution of loss, such that, there was a general decreases in loss near the hub to the extent that for the least loaded case a negative loss (increase in total pressure) was observed. The ability to determine the spanwise distribution of blockage was demonstrated. Large blockage was present in the endwall regions due to the corner stall and tip leakage with little blockage in the core flow region. Hub blockage was found to increase rapidly with loading
True and False Foodplants of \u3ci\u3eCallosamia Promethea\u3c/i\u3e (Lepidoptera: Saturniidae) in Southern Michigan
A survey in 1980 of the associations of over 400 cocoons of Callosamia promethea Drury in vegetation along and adjacent to southern Michigan roadsides gave evidence for seven species of true larval foodplants (not including two others known in the area from other studies) and 17 species of false foodplants, the latter determined by the (1) rarity of their association with cocoons, (2) only one or two cocoons per plant, and (3) their proximity to a well known true foodplant. Three species, sassafras, black cherry, and buttonbush, are evidently the most important true foodplants in this area. Comparisons are made of the foodplants in terms of past literature, geography, and taxonomic relationships
Assessment of mapping exposed ferrous and ferric iron compounds using Skylab-EREP data
The author has identified the following significant results. The S190B color photography is as useful as LANDSAT data for the mapping of color differences in the rocks and soils of the terrain. An S192 ratio of 0.79 - 0.89 and 0.93 - 1.05 micron bands produced an apparently successful delineation of ferrous, ferric, and other materials, in agreement with theory and ratio code studies. From an analysis of S191 data, basalt and dacite were separated on the basis of differences in spectral emissivity in the 8.3 - 12 micron region
Gondomaria grandeuryi (Zeiller) Wagner & Castro, 1998, in the context of an upper Stephanian flora from Surroca (prov. Girona, Catalonia, Spain)
A brief discussion on the general composition of the Stephanian C flora of Surroca is followed by a description of Gondomaria grandeuryi (Zeiller), a rare form of fernlike foliage of uncertain affinity. The genus Gondomaria Teixeira 1964 is discussed and comparison is made with Rhachiphyllum Kerp 1986, a 'callipterid' formgenus of Stephanian C (early Autunian) to later Autunian ages.
Key words: Stephanian, Catalonia, Callipterid, Fernlike, Gondomaria.De una discusión breve sobre la composición de la flora de Surroca, de edad Estefaniense C probable, se pasa a la descripción de uno de sus elementos raros, Gondomaria grandeuryi (Zeiller), de afinidad desconocida. Se comenta el género Gondomaria Teixeira 1964 y se compara con Rhachiphyllum Kerp 1986, un género de forma 'calliptérido' de edad autuniense.
Palabras clave: Estefaniense, Catalunya, Calliptérido, Helechoide, Gondomaria
- …