Properties of phase transitions of higher order

There is only limited experimental evidence for the existence in nature of phase transitions of Ehrenfest order greater than two. However, there is no physical reason for their non-existence, and such transitions certainly exist in a number of theoretical models in statistical physics and lattice field theory. Here, higher-order transitions are analysed through the medium of partition function zeros. Results concerning the distributions of zeros are derived as are scaling relations between some of the critical exponents.Comment: 6 pages, poster presented at Lattice 2005 (Spin and Higgs), Trinity College Dubli

High Velocity Burner Rig Oxidation and Thermal Fatigue Behavior of Si3N4- and SiC Base Ceramics to 1370 Deg C

One SiC material and three Si3N4 materials including hot-pressed Si3N4 as a baseline were exposed in a Mach-1-gas-velocity burner rig simulating a turbine engine environment. Criteria for the materials selection were: potential for gas-turbine usage, near-net-shape fabricability and commercial/domestic availability. Cyclic exposures of test vanes up to 250 cycles (50 hr at temperature) were at leading-edge temperatures to 1370 C. Materials and batches were compared as to weight change, surface change, fluorescent penetrant inspection, and thermal fatigue behavior. Hot-pressed Si3N4 survived the test to 1370 C with slight weight losses. Two types of reaction-sintered Si3N4 displayed high weight gains and considerable weight-change variability, with one material exhibiting superior thermal fatigue behavior. A siliconized SiC showed slight weight gains, but considerable batch variability in thermal fatigue

Technology applications

A summary of NASA Technology Utilization programs for the period of 1 December 1971 through 31 May 1972 is presented. An abbreviated description of the overall Technology Utilization Applications Program is provided as a background for the specific applications examples. Subjects discussed are in the broad headings of: (1) cancer, (2) cardiovascular disease, (2) medical instrumentation, (4) urinary system disorders, (5) rehabilitation medicine, (6) air and water pollution, (7) housing and urban construction, (8) fire safety, (9) law enforcement and criminalistics, (10) transportation, and (11) mine safety

The 2000 Periastron Passage of PSR B1259-63

We report here on a sequence of 28 observations of the binary pulsar system PSR B1259-63/SS2883 at four radio frequencies made with the Australia Telescope Compact Array around the time of the 2000 periastron passage. Observations made on 2000 Sep 1 show that the pulsar's apparent rotation measure (RM) reached a maximum of $-14800 \pm 1800$ rad m$^{-2}$, some 700 times the value measured away from periastron, and is the largest astrophysical RM measured. This value, combined with the dispersion measure implies a magnetic field in the Be star's wind of 6 mG. We find that the light curve of the unpulsed emission is similar to that obtained during the 1997 periastron but that differences in detail imply that the emission disc of the Be star is thicker and/or of higher density. The behaviour of the light curve at late times is best modelled by the adiabatic expansion of a synchrotron bubble formed in the pulsar/disc interaction. The expansion rate of the bubble $\sim 12$ km s$^{-1}$ is surprisingly low but the derived magnetic field of 1.6 G close to that expected.Comment: 8 pages, 6 figures, 3 tables, LaTeX (mn.sty). Accepted for publication in the Monthly Notices of the Royal Astronomical Society. Also available at http://astronomy.swin.edu.au/staff/tconnors/publications.htm

Materials technology assessment for stirling engines

A materials technology assessment of high temperature components in the improved (metal) and advanced (ceramic) Stirling engines was undertaken to evaluate the current state-of-the-art of metals and ceramics, identify materials research and development required to support the development of automotive Stirling engines, and to recommend materials technology programs to assure material readiness concurrent with engine system development programs. The most critical component for each engine is identified and some of the material problem areas are discussed

Turbulent boundary layer heat transfer experiments: Convex curvature effects, including introduction and recovery

Heat transfer rates were measured through turbulent and transitional boundary layers on an isothermal, convexly curved wall and downstream flat plate. The effect of convex curvature on the fully turbulent boundary layer was a reduction of the local Stanton numbers 20-50% below those predicted for a flat wall under the same circumstances. The recovery of the heat transfer rates on the downstream flat wall was extremely slow. After 60 cm of recovery length, the Stanton number was still typically 15-20% below the flat wall predicted value. Various effects important in the modeling of curved flows were studied separately. These are: (1) the effect of initial boundary layer thickness; (2) the effect of freestream velocity; (3) the effect of freestream acceleration; (4) the effect of unheated starting length; and (5) the effect of the maturity of the boundary layer. Regardless of the initial state, curvature eventually forced the boundary layer into an asymptotic curved condition. The slope, minus one, is believed to be significant

Analysis of Mesostructure Unit Cells Comprised of Octet-truss Structures

A unit truss finite element analysis method allowing non-linear deformation is employed to analyze a unit cell comprised of n 3 octet-truss structures for their stiffness and displacement compared to their relative density under loading. Axial, bending, shearing, and torsion effects are included in the analysis for each strut in the octet-truss structure which is then related to the mesostructure level (unit cell). The versatility of additive manufacturing allows for the fabrication of these complex unit cell truss structures which can be used as building blocks for macro-scale geometries. The finite element calculations are compared to experimental results for samples manufactured on a Stereolithography Apparatus (SLA) out of a standard resin.Mechanical Engineerin